I have a 2010 camera RA, I was driving this morning and s...
Responses
Customer
234 days ago
OkayMy car won't reverse. It goes into gear, but just rolls forward. I have a 2010 camero Te. There are no lights on also. All the pressure gages are normal
TysonP617
234 days ago
Hello, I'm Tyson with just answer, I’m sorry you’re having trouble. I can assist you today. There may be a slight delay due to site and **ignore the just answer call pop ups** they have can be confusing and are site generated, if we get to a point we need the live call we can but most prefer to use the site. I will do my best to reach the following goals:
· Find the correct fix
· Save you time and money
· Give great service
· Earn your 5 star rating
TysonP617
234 days ago
I would recommend getting it hooked up on a pro scanner at the shop you towed it to. I think you'll find an issue with either the torque converter or internal to the transmission, if not a simple fix I'd recommend a reman trans over rebuilding. Hopefully the scan will find failed sensors but this sound more internal from your description.
Customer
234 days ago
Okay thank your! I am currently waiting on the shop to tell me what is going on with it
TysonP617
234 days ago
You're welcome. I've seen to much go on in rebuilds I always say if it is the trans get a reman.
Customer
234 days ago
When O checked the trans gave it was normal, but I would rather prepare for the worse
TysonP617
234 days ago
Yea just in case i always give that info a reman is the best option. Hopefully they find something simple as a sensor or shift solenoids.
Customer
234 days ago
Thank you so much for taking the time to answer my questions! I hope that you have a good d day
TysonP617
234 days ago
You too! You're welcome.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
How do I replace the seat belt pretensioner?
The seat belt pretensioners are a key part of the front seat safety system. The pretensioners help the belts restrain the driver and front passenger quickly in the event of an accident. The pretensioners can only be used once, so...
AC makes noise when compressor kicks on.
This has come up often on this vehicle. The noise typically comes from the AC compressor clutch. When the AC is turned on the clutch should engage tightly and spin with the AC compressor pulley. The clutch tends to make...
Code P0128 - running too cold
Hello. This code is indicating that your car’s thermostat is not working properly. Your thermostat needs to be replaced and engine lights needs to be reset. Your car will also need to be test driven. Spark plugs are also recommended...
Brake lights don't work
Some brake lights and turn signals share the same circuit, but looking at the wiring diagram for your vehicle, I see that this is not the case; there are two separate circuits. My guess is that the fuse is blown....
Car cranks up and stay cranked soon as I put it in drove it cuts off after a lil jurk an still will crank rite back up its a 2014
Hi there. It sounds like you may be having internal transmission concerns affecting the engine; possibly a torque converter lock up solenoid stuck on. This can be confirmed with a capable scan tool and a digital volt/ohm meter. Check for...
High oil pressure
This will usually come on when one of two things are happening. Either the motor is in fact over filled with oil or the oil pressure sending unit (https://www.yourmechanic.com/services/oil-pressure-sensor-replacement) is not working properly and may be producing a faulty reading....
I put power steering fluid in my car and now my car is smoking I don't know if it needs an oil change or is low on oil or transmis
With the engine off you should first using soapy water brush and clean area where fluid was spilled. Then rinse off soap. If you still cannot remove oils then have a professional steam clean off engine for you so the...
My car won't move when i press the gas pedal i have never had a problem before. I did notice a leak but i thought it was the oil from the transmission.
You should check for any codes that could be stored in the ECM (computer) as the check engine light is on. This will give you a starting place to check for the condition that you are having. Since the vehicle...
My car wont go pass 20-30mph whats my problem
Hi Robert. Thanks for contacting us today. Usually, when the car will not go past those speeds, it's because the ECU has detected some sort of fault or problem with the transmission or driveline components. This will activate a "limp...
Browse other content
Maintenance
Estimates
Services
I have a 2010 camera RA, I was driving this morning and stopped at a red light, it accelerated but it felt funny, like it wouldn’t go over 40mph, so I pulled into a drive way. I went to reverse now it just goes forward. Can your h...
I have a 2010 camera RA, I was driving this morning and stopped at a red light, it accelerated but it felt funny, like it wouldn’t go over 40mph, so I pulled into a drive way. I went to reverse now it just goes forward. Can your help Mechanic's Assistant: How old is the transmission? Have you checked the fuel filters? I just brought the car back in June of last year, I don’t know how old the transmission is. Nope O have not checked the fuel filters Mechanic's Assistant: What is the make/model of your '10 transmissions? I’m so sorry, I don’t know the answer to that question. I don’t know anything about cars Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Well speaking that it is 20 degrees the most I did was call a tow company, speaking I don’t know anything about cars. I didn’t want to risk doing more damage to it. Now I’m trying to figure out what to do Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? No sir