☰
GET A QUOTE

When its on clutch wont ingage the gears only can change ...


When its on clutch wont ingage the gears only can change gears when the car is off Mechanic's Assistant: Has the clutch been slipping? Are you having any trouble shifting? Its not driveable when change into any gear M...

When its on clutch wont ingage the gears only can change gears when the car is off Mechanic's Assistant: Has the clutch been slipping? Are you having any trouble shifting? Its not driveable when change into any gear Mechanic's Assistant: What is the make/model/year of your car? 2005 9-3 saab turbo 2.0 4 cylinder Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Nothing Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Also has whar i believe is engi e knock

Read More

Responses

Automotive Expert
Hi, my name is\*\*\*\*\*’ve been a technician on Just Answer since 2007 and I'll be helping you today. I'm sorry to hear you are having difficulties with your vehicle. I know how inconvenient car trouble is, but together, we will get your vehicle back up and running quickly. May I ask whom I am chatting with today?

Javier dominguezNoCan u help
Automotive Expert
Hi Javier, it's nice to meet you. This means the clutch is bad. It's worn out and not doing it's job of separating the engine and transmission when the engine is running so you can shift. When you replace the clutch, you will also want to do the throw out bearing and the pressure plate at the same time so you don't have to pull the transmission again.

Its not the slave cylinder
Automotive Expert
No, it's not the slave cylinder if the clutch pedal is returning after you push it down. A bad slave would not push the clutch fork so it would stay on the floor

The clutch also is realy stiff and it makes a sound beeping sound when oush down
Automotive Expert
It sounds like the clutch disc is shot and possibly the pressure plate as well. That will make the pedal stiff.

Do u have. Diagram or do you know where the dip stick for transmission is located
Automotive Expert
There isn't a dipstick, it's manual, there is a fill hole by the driver side axle that has to be checked.

how do u check trans fluidWhat do u mean by check
Automotive Expert
You remove the fill plug and put your finger in the hole. If you get oil on it, it's full.

I dont know where its at from the picture donu have one that tells u exactly where its located
Automotive Expert
This is the only diagram of the fill plug. As you can see there is a drive axle, so from under the car look at the drive axles where they go into the transmission, you will find the plug. This isn't your problem by the way.

its my clutch needs to be replaced ?do i also change slave and master cylinders
Automotive Expert
No, they don't have to be replaced at that time. Just the other items I mentioned.

Whats are sum reasons my car wont go into gear when i step on clutch
Automotive Expert
Worn out clutch, bad clutch master cylinder, some type of broken shift issue. I assume you are still looking for something other then the clutch to be the issue? Has the transmission been pulled and the clutch looked at?

No i just replaced the master clutch and no diffrence still wont go into gearWhat do u mean some type of brocken shift issue?
Automotive Expert
The master clutch? I am not sure what that is. If you mean the clutch master cylinder, it makes sense to me. It's likely got a bad clutch. If the shifter were broken

My mistake clutch master. Cylinder did no diffrence how do u know if shifter is brocken
Automotive Expert
It would feel loose and sloppy. The car needs a new clutch to be honest.

I was kinda hoping that was not it but it had no signs of going bad the day before worked fine next morning didnt want to go in gear
Automotive Expert
I understand, I had to walk 7 miles one time for the same reason. Clutch ws fine and then I shifted and the truck wouldn't move.

your not a machine i thought it was all computerize responses
Automotive Expert
No, I am human my friend, and I didn't enjoy walking, be glad it's gone bad there and not in the middle of no place.

No not so good its at my moms house and i dont there i live on the other side of town.m
Automotive Expert
I see, sorry to hear that.

Why would a throw out bearing get jammed
Automotive Expert
Lack of lubrication or a bad part. Usually I lube the shaft the bearing runs on.

My slave cylinder got jammed i would put the car in gear and take my foot off the clutch and it keeps on idleing it dosent stall

Still not sure what you need?

Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.

Get a Diagnostic

Top Questions

Trending Topics

What others are asking

How do you tilt the steering wheel?
Your car is equipped with a tilt steering feature that lets you adjust the angle of the steering wheel. This provides you with the means to customize your driving position for your height and other preferences. Here’s how to do...
Read more
Truck not starting.
When you say won't start (https://www.yourmechanic.com/services/car-is-not-starting-inspection), I will assume it is a crank no start. There are at least two possible failures for the no start. First and most common is the the fuel pump and filter. The next most...
Read more
Need to start my car after sitting for a year.
The recommendations for putting the car back into service is to remove and replace the old fuel in the fuel tank. Replace the fuel filter. Charge and test the battery and replace if needed. Change the oil and filter after...
Read more
No power after startup
It sounds like your catalytic converters are stopped up. This is a common issue with fords. If you have an infrared laser temperature gun, you could aim it at your tailpipes while someone else revs the engine. If the catalytic...
Read more
Broken belt
Hello. Your particular vehicle only has one belt. This belt is called the serpentine belt. The serpentine belt wraps around all of your pulleys, driving the alternator, water pump, and power steering pump. When this belt breaks, the Battery Light...
Read more
Is the transmission control solenoid inside or outside the transmission?
Hi there. This code comes up when there is a circuit issue with the pressure control solenoid. This unit is located internal to the transmission. In a lot of cases, the issue is the wiring harness to the solenoids and...
Read more
When replacing upper ball joints can you just purchase the instaed of whole control arm
I checked multiple aftermarket catalogs, the Dodge OEM catalog and even E-Bay for possible gray market junk but I can find no listings for separate upper ball joints to install in the upper control arm for your vehicle. For some...
Read more
Many warning signs via gauge cluster
Intermittent, and ultimately unexplainable, electrical glitches can and sometimes do occur. They can represent "one off" incidents and thus they don't recur. However, it is also possible that you have an incipient, and thus real fault. One thing you, or...
Read more
is there a spout connector on a 85 lincoln town car and if so where's the location
The spout connector is within about 6 inches from the electrical connection of the TFI module on the distributor. Pull out plug to set base timing.
Read more

Browse other content

Maintenance
Services
Cities
Cars