Hello. I recently had transmission issues with my truck. ...
Responses
Mechanic01
269 days ago
Hello and thank you for using JustAnswer. My name is \*\*\*\*\* \*\*\*\*\* I will do my best to assist you.. I help many customers, so sometimes my replies are delayed, I will respond once available. During this conversation you will be given an automated offer for a phone call. You may accept or decline that offer.I don’t personally offer this service so if you take this another tech may call.
whats the year make model and engine size of the vehicle?
Customer
269 days ago
96 dodge ram 1500 5.2LGood to meet you Shawn. My name is \*\*\*\*\* \*\*\*\*\*
Mechanic01
269 days ago
nice to meet you, I need to look at a few things ill be right back
Customer
269 days ago
Sounds good.
Mechanic01
269 days ago
OK so as I suspected you more than likley have either a crankshaft sensor broken or failed, or the flex plate is cracked or damaged in some way, make sure to inspect the flex plate very carefully, if thats ok I would suspect sensor as both of those are related to your transmission issue.
Customer
269 days ago
Okay fair enough. What about a nuetral safety switch? I do remember seeing a code pertaining to it before I couldn't start the vehicle anymore. Could that cause a no start too? Perhaps from damage to the valve body.
Mechanic01
269 days ago
yes that could also be a issue, there could be 100 different things that wouldnt allow it to start. check out those things, if anything seems off replace, once the trans is back in the vehicle and your still having issues let me know whats going on and we can troubleshoot from there
Customer
269 days ago
Alright. Thanks a lot Shawn. I appreciate the help.
Mechanic01
269 days ago
your very welcome!
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
key won't start engine
It is possible that you could have one of two issues. You could be experiencing a bad alternator (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-alternator) problem that is causing your battery to be drained and become faulty well before it should be. In this case, I...
Why when the front brake pads are installed onto the rotor they sit about a 1/4 of an inch higher than the rotor?
Hello. If you are referring to the brake pads extending past the edge of the rotor, then I believe you may have the wrong brake pads, or perhaps the wrong rotors installed on the vehicle. I would verify that the...
Thumps and grinding noises in differential
It is possible that you could have a faulty wheel bearing (https://www.yourmechanic.com/article/symptoms-of-bad-or-failing-wheel-bearings). Wheel bearings can often cause grinding noises when the lubrication onside them dries up. I would recommend having your vehicle inspected once more for a rear wheel bearing...
What do you recommend for transmission fluid and engine oil for a 2010 Lincoln Town Car?
Hello. Ford or Motorcraft brand would be the OEM fluid brand that your vehicle came equipped with from the factory. However, any brand of oil and transmission fluid will work fine as long as it meets the API certification rating,...
Brakes go to floor and are squeaky...
The brake booster (https://www.yourmechanic.com/services/vacuum-brake-booster-check-valve-replacement) is a mechanism that uses vacuum pressure to take the force being applied to the brake pedal and amplify it. If the booster is bad, then the full amount of force needed to activate the master...
my 2011 kia Optima jumps when I put it on gear, either reverse or drive. after about a half-hour of driving if I come to a stop it.
Hi there. There seems to be something wrong with the Hybrid transmission on your vehicle. The transmission may have an internal part that is malfunctioning. I recommend seeking out a professional, such as one from Your Mechanic, to help you...
BRAKE FLUID LEAK; REAR DRIVER SIDE 2005 Chevrolet Cavalier
Hi - the brake fluid leak you discovered could be a damaged brake line, or leaking brake caliper or wheel cylinder. I recommend a brake system inspection (https://www.yourmechanic.com/services/brake-safety-inspection) ASAP, performed by a mobile, professional mechanic, such as one from YourMechanic,...
Car feels like it want to launch more pressure on brake than usual rpm jumping up and down when in neutral or park
Hello, thank you for writing in. Unfortunately, there are a large number of components that can cause this. The vehicle needs to be scanned for diagnostic codes. Even without an engine light on, there may be code present pertaining to...
WHERE IS 2006 KIA SEDONA BACKUP LIGHT SWITCH? BULBS GOOD.
The reverse lights are controlled by the neutral safety switch on the transmission as a computer input to the front control and rear control modules. These modules are accessed by using a scanner to scan for codes and data input...
Browse other content
Services
Cities
Maintenance
Hello. I recently had transmission issues with my truck. I was getting noises from under it as if marbles were rolling around in the torque converter, and soon after my vehicle had problems shifting. However the main thing worryin...
Hello. I recently had transmission issues with my truck. I was getting noises from under it as if marbles were rolling around in the torque converter, and soon after my vehicle had problems shifting. However the main thing worrying me currently is that today I tried to at least start my vehicle and it no longer does. Could a faulty transmission or torque converter cause an engine failure? Mechanic's Assistant: Have you replaced the transmission's filter lately? No Mechanic's Assistant: What is the make/model/year of your transmissions? Are you a bot? Mechanic's Assistant: Yes, I'm a bot. I make the process of talking to the Mechanic more efficient and affordable by asking basic questions. Are you fixing your vehicle yourself? What have you tried so far? I am fixing the vehicle myself. I have the transmission out and I am in the process of overhauling it as well as replacing the torque converter. However I am worried about what could cause the vehicle to not start when I put it back in.