Q: Car not starting.
My car will not start.
Recommended Services
| Car is not starting Inspection | $94.99 - $114.99 | Get a Quote |
The ignition system on these cars is a very common problem causing no starts. The fuel pumps are the next most common problem causing the no start. My suggestion is to have a qualified technician check the ignition and fuel system for the failure. The fuel pump and filter should be replaced as a set if they are the failure. The ignition module and coils should be changed as a set if they are the failure.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Brake lights not working in 2001 Mercedes-Benz SLK320
If both brake lights are out, you might be having an issue with your "BOO" or brake on/off switch. This is the switch that actually detects when you're stepping on the brake pedal and sends the electrical signal to the...
Car is slow to turn over
It seems you have three issues. If the engine is cranking slowly, the battery, the starter, the alternator, and the wiring will all need to be checked. The battery is the most likely problem, especially since your Infiniti is more...
check engine light on and racing engine
You will need to have the Check Engine Light tested and the codes diagnosed to find the cause of the high idle. Since you say you are experiencing a racing engine, you may have a bad throttle position sensor or...
Car idles rough, extremely weak and stalls when put into gear
Hello. This can be caused by a number of things. I usually start by scanning the computer for codes. This will let me know if the computer is seeing any issues. If there are no codes then I take a...
Rumbling on acceleration and idle while using air conditioning.
This may be related to a dirty or failing idle air control valve. The idle air control valve monitors the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and at...
Engine wont reach operating temperature
The first thing to check is to see if the cooling fan clutch is working properly. Start the engine when it is cold and rev the engine up to 1500 rpm and listen to the cooling fan to see if...
Car makes whining noise when I start in the morning
Hello, thank you for writing in. The vehicle will make noise when cold for several reasons. If you belts are loose at all, it may take them a while to warm up and grip the pulleys the way they are...
P260F code
Unfortunately, I cannot give you an answer as to what exact part to change. Code P260F relates to the evaporative system. Simply put, gas fumes from the fuel tank have to be burned away. These fumes are vented forward to...
Oil pressure light is on
The oil pressure light will usually come on when a few things could be happening. Either the motor is in fact low on oil, the oil pump could be failing or the oil pressure sending unit (https://www.yourmechanic.com/services/oil-pressure-sensor-replacement) is not working...
Related articles
How Can Moisture Get Into an Ignition System?
All All ignition systems use electricity to crank and run the engine. This is true whether you have a conventional, electronic, or distributor-less ignition system. Water is the enemy of electricity and if it intrudes into the ignition system, it...
How to Remove, Install, and Adjust Ignition Timing
Ignition distributors help spark the gas and air in the engine. Worn distributors need to be removed to be cleaned to maintain proper ignition timing.
How to Replace the Electronic Spark Control Module
The car ignition has an electronic spark control module that fails when the Check Engine Light illuminates or if the engine does not start.
Browse other content
Maintenance
Services
Cities