It's shacking or skipping and when I push the gas peddle ...
Responses
Mike V.
416 days ago
Hi, my name is\*\*\*\*\*’ve been a technician on Just Answer since 2007 and I'll be helping you today. I'm sorry to hear you are having difficulties with your vehicle. I know how inconvenient car trouble is, but together, we will get your vehicle back up and running quickly.
You may be prompted to accept phone service. I do not offer this service, nor do I make the calls but other technicians may make a call and help you with your vehicle needs if you wish to accept this service. It is not required!
May I ask whom I am chatting with today?
Customer
416 days ago
My name is Shirley
Mike V.
416 days ago
Hi Shirley, it's nice to meet you.
Usually a misfire is the result of bad plugs, plug wires and possibly an ignition coil.
This is where I would start, especially if you are feeling it under load. If the check engine light is on it may tell you which cylinder is misfiring, then I would focus on that cylinder. If you don't have a code reader, most parts stores will check the codes for free for you.
Please let me know if you have any questions.
Thanks
Customer
416 days ago
The engine light has been on for a while but we tried to do the code reader but for some reason my truck won't connect to one so we aren't able to read the codesWe know it needs spark plugs and wires but we are unable to do so until Monday
Mike V.
416 days ago
That's ok I would still proceed with a tune up without a problem.
If the condition isn't fixed with the plugs and wires, then you likely need a coil.
I would try a different code reader or a parts store to see if you can get it working.
Customer
416 days ago
Okay could that be why when I push the gas peddle but it doesn't go
Mike V.
416 days ago
Well, if it's misfiring that's going to cause issues trying to pick up speed. It's possible there is something going on with the transmission but I would not start with it.
Customer
416 days ago
It cranks up but makes a whining noise after it starts up, but here lately it's been skipping a littleToday it just got worse could it be the spark plugs and wires cause they haven't been changed since I bought the truckThey are wore out
Mike V.
416 days ago
A whining sound could be any pulley on the engine. Remove the drive belt and start it. If the whining is still in there, then it's not the pulleys, if it's gone, then its one of the pulleys, if you spin them you can probably tell which one.
If it's running worse it's very possible.
Customer
416 days ago
We got it thanks
Mike V.
416 days ago
You're very welcome, please let me know if there is more I can do to assist you today.
Customer
416 days ago
Okay thanks
Mike V.
416 days ago
You're welcome.
Customer
416 days ago
It's doing it again when I push the gas its like it doesn't have any power what does that mean?
Mike V.
416 days ago
I need you to be specific, the engine doesn't have power and won't move the truck or the engine is revving up but the truck won't move?
Customer
416 days ago
I was driving the truck down the interstate and as I had my foot on the gas pedal it didn't have any power I had it all the way to the floor and it wasn't acceleratingI pulled over then it started to accelerate again as I continued to push the gas pedal
Mike V.
416 days ago
Have you done the plugs and wires already?
Customer
416 days ago
No not till MondayCould it be caused by running the a.c.?no when I pushed the gas peddle the engine did not rev up
Mike V.
416 days ago
Well it seems to me if you haven't been able to do the suggested repairs, it's going to have the same issue.
Running the air does add a load to the engine, but without doing the fix, we can't really expect anything different.
Since the engine didn't race, that really points to an engine issue.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Can I prevent the doors from being locked with no one in the vehicle while the engine is running?
If the driver-side door is open while the engine is running and the door lock button is pressed, then all doors will lock and then the drivers door will unlock. The same will occur if the door lock button on...
Where are the front cup holders?
The front cup holders are located next to the shift lever.
Brake lights not working in a 2003 Chevrolet Silverado 1500
The first thing to check for is any blown fuses for the brake lights. The brake light switch gets power from the a fuse and then sends power into the brake light fuse and the turn signal module. Power from...
Rough idling of engine with check engine light on
Hi there, thanks for writing in. The driver restraint fault code is a common issue on the BMWs. Here is how to clear it: Step 1: choose chassis "E65", then click on "Functional Jobs" Step 2: choose "Error" on the...
Car is easy to put in gear, but won't move. It can be pushed so no wheel or break lockage. Transmission fluid is very dark
Hi there, thanks for writing in. Odds are high that the transmission has failed. "Dark" fluid indicated a lot of clutch pack material has worn. Also, this can cause the pump to fail inside the transmission. Flushing the fluid at...
My car has low battery voltage - 2015 Toyota RAV4
Hello. From that test, I can determine that the charging system, as in the alternator, is fine. The voltage of the battery itself is very low, however. The starting volts are dropping way below the minimum, which means that the...
had my fuel pump replaced and three days later my check engine light is on, why do I smell gas after driving?
If you were getting a fault code for Evap Leak or something similar, it may be due to the installation - saying this sight unseen of course. Noting that you smell gas, it's possible that the seal on top of...
There is a slight wobble at speeds between 50 and 70 mph and I'm not sure what is causing it.
Hi there. It seems as if you have a few possible issues going on with your Jeep. First, if you have a bent wheel, the tire and wheel combination will never balance correctly; as weight distribution on the tire and...
I have a 2012 Nissan titan. The interior lights won't turn on when the door is open but work when the key is turned in the ignitio
Hi there. It is more than likely that the door switch that activates the interior light is the source of your problem. One easy thing you can do to determine this is to see if your door chimes when it's...
Browse other content
Cities
Estimates
It's shacking or skipping and when I push the gas peddle down it doesn't go Mechanic's Assistant: Have you noticed an increase in fuel consumption? And how does the vehicle start—same as usual? Not sure and lately w...
It's shacking or skipping and when I push the gas peddle down it doesn't go Mechanic's Assistant: Have you noticed an increase in fuel consumption? And how does the vehicle start—same as usual? Not sure and lately when I turn it over it whines Mechanic's Assistant: What is the make/model/year of your car? 2003 GMC Yukon My husband said it needs spark plugs and wires could that be the problem Mechanic's Assistant: Are you fixing your Yukon yourself? What have you tried so far? Yes he does and he recently changed the oil and replaced the filter