Hi I was driving and the engine oil symbol popped up and ...


Hi I was driving and the engine oil symbol popped up and has been on my car for a week but I hadn’t got a chance to get an oil change. And then while I was driving my check engine symbol came on and no longer had control of my veh...

Hi I was driving and the engine oil symbol popped up and has been on my car for a week but I hadn’t got a chance to get an oil change. And then while I was driving my check engine symbol came on and no longer had control of my vehicle Mechanic's Assistant: When was your last oil change? Months ago Mechanic's Assistant: Anything else we should know to help you? I did put a quart in 3 weeks prior though Mechanic's Assistant: OK. Got it. I'm sending you to a secure page to join JustAnswer. While you're filling out that form, I'll tell the Expert about your situation and then connect you two.

Automotive Expert
Hi, my name is\*\*\*\*\*’ve been a technician on Just Answer since 2007 and I'll be helping you today. I'm sorry to hear you are having difficulties with your vehicle. I know how inconvenient car trouble is, but together, we will get your vehicle back up and running quickly. May I ask whom I am chatting with today?

Terri Johnson
Automotive Expert
Hi Terry it's nice to meet you. It sounds like you might be out of oil, I would start by checking it. I would also need clarification on what you mean by loss of control of the vehicle?

I mean I couldn't drive it forward. When I put my foot on the gas it didn't do anything.I put some engine oil in the car alreadyI was able to put it in neutral and push it out the road though. But whenever it was in drive t just drifted backwards.Also my battery symbol popped up the same time as my check engine symbol did
Automotive Expert
Ok, so the car was low on oil which is why that light came on then. Whats the year, make model and engine size please? Also, does it have an automatic or manual transmission?

2006 Mazda Tribute it's an automatic transmissionEngine size I'll have to check one moment
Automotive Expert
Ok, If it's not moving forward for you then there is an issue with the transmission. I would check the transmission fluid to begin with and make sure it's full. It may smell burned and look black if it does, then that would indicate a internal transmission issue. While the oil light may have meant it needed an oil change, at this point it sounds like your transmission is out, or the shifter cable is broken.

Where is the transmission fluid resivourTo check it because I'm not sure
Automotive Expert
one moment

I found it

It doesn't smell burned

That's the color

Also would I need my battery jumped if that sign came on?
Automotive Expert
It looks good, so I would check the linkage, make sure it's connected and tight, this is under the airfilter box If the battery light is on when it's running, it means the alternator isn't charging the battery.

Sorry I'm not sure where the air filter box isI don't see any lose connections relating to the transmission fluid
Automotive Expert
It sounds like you may need to have it towed to a shop to get a proper determination of the issue.

Is it over here

Yea I am getting it towed but I just want to see if it's something I could fixThanks anyways at least we can rule out the transmission issue. I think after putting oil in it and jumping my battery I should be ok. Hopefully
Automotive Expert
Here is a link that shows you where that shift linkage is [https://www.dropbox.com/s/hwlre17ikro3q2t/shift%20cable.pdf?dl=0](https://www.dropbox.com/s/hwlre17ikro3q2t/shift%20cable.pdf?dl=0)

What others are asking

How do you work the automatic transmission?
While an automatic transmission is simpler to operate than a manual transmission is, there are several things that you’ll need to know to ensure that you’re able to drive safely. Here’s a quick rundown of what each gear does: Park:...
Car not shifting into gear
Whether your vehicle's transmission is automatic or manual will change the diagnosis a bit. Both types of transmissions use a linkage system to connect the shifter to the transmission under the hood. Any binding or broken mechanical connection will cause...
I was messing with the throttle body and caused a "throttle actuator control system forced idle" problem
The computer will sense the throttle opening when the the accelerator pedal was not pressed and set a check engine code (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection). This caused the computer to close the throttle and not allow it to open until the code is...
the shop costed me 378 dollars to replace camshaft sensor for 2004 chrysler 300M. am i being ripped off?
The camshaft position sensor itself, for your application, costs at most $30 if you buy it using the usual 30% off coupon(s) at the national auto parts chains. Even if you pay full fare, that is buy the genuine OEM...
car lost power when driving and had to tow it home.
Hi there. Your vehicle may need a tune up. Check the air filter, spark plugs and wires. If they are the original parts, I recommend replacing them with OEM parts. Also check the idle air control valve (IAC (https://www.yourmechanic.com/services/idle-control-valve-replacement)) and...
Want to know if the transfer case clutches from a 2000 Chevy 1/2 ton will work in my 2003 Chevy 1/2 ton.
Hi there. Both vehicles should have an NP 246 transfer case in them. Check the casting number on the transfer cases and make sure that they both say 246 on them. If so, then yes they are interchangeable and you...
how to increase horsepower for my lexus rx 300 v6 240 km/h
Hi there. Typically when you make an aftermarket intake improvement, the next evolution is to find a way to increase fuel flow or ignition timing to allow fuel to burn more efficiently within the combustion chamber. This can be completed...
pads are 2mm on 2014 yukon xl denali with 52000 miles...all works good...incidental finding...do I replace now? Pads and rotors? o
At 2mm, the pads are definitely due for replacement. The the thickness of the brake rotors should be measured and compared to the minimum thickness specifications. If they measure above the specs and there is enough thickness to them, resurfacing...
What does it mean when the eps light won't go off in your car?
If the EPS light is always on, it means the vehicle's computer is reporting a fault in the electronic power steering system. A mechanic can download the trouble codes from the computer that have caused the alert, and then follow...