I have a coup;e codes that showed up for my cae was wonde...


I have a coup;e codes that showed up for my cae was wondering if you could help me find the right parts that would fix the pronblem Mechanic's Assistant: Do you have a scan tool to read the codes? Yes Mechanic's Assis...

I have a coup;e codes that showed up for my cae was wondering if you could help me find the right parts that would fix the pronblem Mechanic's Assistant: Do you have a scan tool to read the codes? Yes Mechanic's Assistant: What is the make/model/year of your car? 14 chevy impa,la Mechanic's Assistant: What year is your Chevy? 2014 Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Yes i have put a new fuel pump in it and also changed the camshat position sensors but the problem continues

Automotive Expert
Hello, my name is \*\*\*\*\* \*\*\*\*\* to just answer! I will be assisting you with all of your vehicle questions today. I’m really sorry that you’re having this issue and I’m going to help you through it, but please understand that I (respectfully) don't know your skill level or tools you have to assist us to diagnose/repair your vehicle. Also, understand that I can't see, smell, hear or touch the vehicle either, so your patience/understanding is appreciated. Please allow me up to 10 minutes to gather schematics and other pertinent information for this issue. I do not know anything about the fees or charge so please if you have any concerns, direct them to customer service. My aim is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. I appreciate your patience and will provide responses as soon as possible. Thank you. what codes do you get?

p0010 P0011C0242
Automotive Expert
ok, when you your last oil and filter change?

my oil life message just came on bout a week ago
Automotive Expert
ok, the cams and vct solenoid that control the cams, run off of oil pressure. dirty oil has low viscosity and a sludge buildup that will clog the oil passages for the vct solenoids, thus affect the cams. the very first thing you need to do is to have the oil changed and the filter.

ok sounds goodif problem continues whats the next step
Automotive Expert
and make sure you use a genuine GM oil filter then you can come right back here and let me know how it went.

ok thank you
Automotive Expert
you are very welcome.

What others are asking

Car squealing when accelerating
Your concern sounds like your serpentine belt. After time corrosion and/or rust can build up in the grooves of the pulleys and the belt causing such a sound to be produced. The tensioner should also be inspected for proper operation,...
Car making grinding noise
There is a good chance that what you heard was the transmission. Transmissions are very complex systems. It is very likely that the transmission will need to be overhauled or even replaced, depending on what part of the transmission has...
Car hesitating and surging while accelerating
The main cause of this car running rough is likely the distributor. Over time, the electronics in the distributer start to fail, and need to be replaced. The most common time for failure is around 150,000 miles. You should have...
Key getting stuck in the ignition
The problem is the battery is not supplying enough voltage to the ignition lock to release the ignition key. I recommend having a qualified technician perform a battery test (https://www.yourmechanic.com/services/battery-is-dead-inspection) to see what the output of the battery is. If...
I have no brake lights but I do have tail lights working. I have no blown fuses either. Why do I not have brake lights?
You will need to test the brake light switch and its connector above the brake pedal on the bracket to see if the switch is being pushed in or released when the brakes are pushed. On some vehicles they will...
I just put my car and park, and the ignition key wont turn all the way back to release the key. It turns once back, then stops.
A few things to try. 1 - Wiggle the key in the ignition while trying to turn it. 2 - Move the shifter to neutral and back to park a couple of times, then try to turn it again. 3...
Squeak / Grinding Sound only when moving 2013 Mercedes C250
Hi there - thanks for providing a sound sample! Noises are probably the hardest thing to diagnose, even when you can capture a recording like this. I suspect either the brake pad wear warning tab, or the driveshaft center bearing...
car idles rough after i changed the starter
Hello, and thank you for writing in. While there are ways to remove the starter by not having to disconnect much of anything else around it, but often it is easier if we do. That is when these issues arise....
Oil still leaking after I changed oil filter
Unless there is an imperfection (e.g., serious pitting or irregularities) on the engine mounting base for the filter gasket, the leak is probably not at the filter. There are other adjacent potential leak spots such as the oil pan gasket,...