I have a 2017 check traverse and the check engine light w...


I have a 2017 check traverse and the check engine light went on. Ever since the light went on the car wont start with the remote. Now every time we remove the gas cap and pump gas the car starts shaking and wants to shut off. If t...

I have a 2017 check traverse and the check engine light went on. Ever since the light went on the car wont start with the remote. Now every time we remove the gas cap and pump gas the car starts shaking and wants to shut off. If the car is off it kind of gives us a hard time to start it. The car runs great besides all that Mechanic's Assistant: Does the light stay on, or does it blink? The light stays on Mechanic's Assistant: Are you fixing your Traverse yourself? What have you tried so far? I haven't tried anything. I want to take it to a shop. I did drive from Ohio to ca so idk if it could be a tune up Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? No thats it

Automotive Expert
Hi. Welcome to chat! My name is \*\*\*\*\* \*\*\*\*\* I am an expert here, at Just Answer. I will assist you with your questions today.

Ok thank you so much
Automotive Expert
About the remote start, if the check engine light is on, the remote start will not work. That is normal. Second, for the concern you are having, the problem is likely due to the purge valve for the evap system. The evap system allows fuel tank vapors to be introduced into the engine through the purge valve, to be reburned. Commonly the purge valve fails and causes the issues that you are having.

Do you know an estimate of how much that would cost to repair. I'm in California
Automotive Expert
Depending on where you go, with diagnosis, and parts, it would be around 350 dollars.

Okay. Thank you so much
Automotive Expert
Your welcome. If you need anything else just please let me know. Thank you.

What others are asking

Why is my dashboard cracked in so many places?
Hi! Thank you for writing in with this question. This is a common issue for multiple Toyota vehicles of that vintage. Toyota released a Technical Service Bulletin (TSB 0039-15) for this concern in June 2015. The specific coverage is based...
How do I use the power sunroof when my vehicle is turned off?
When you enter your car, you cannot adjust the sunroof without first turning the vehicle on. However, after turning the vehicle off, you can continue to operate the power sunroof. If you have the electronic vehicle information center (EVIC), then...
Exhaust manifold bright red when car is on
Hi there. An exhaust manifold that reaches high temperatures is a sign of a blockage in your exhaust system. This blockage stops excess emissions to be burned off. The excess fuel and carbon will build up causing your manifold to...
Belts squeaking
Hello, your engine has two belts and adjustable tensioners. The belts should be checked to see if they are dry and cracking, and also to see how stretched they are. The belt's tensioner can be used to tighten the belts...
Hit curb. Control arm bent.
The best thing to do is to have a body shop with a frame straightness check machine to quote the repairs for your vehicle. If you have full coverage on your vehicle insurance then now would be a good time...
transmission not shifting and the rpm's keep climbing up.
Hi there. It seems that the gears are slipping and causing the rpm's to climb up. Check the transmission fluid and make sure that it's full and red in color. Very dark red or black transmission fluid is an indication...
Car won't start. Can't determine if either ISM is bad or hydraulic valve body need to be replaced.
I presume your saying that your car does not crank when you turn the key, because that is the only fault I would expect to be associated with transmission parts controllers.The ISM (intellegent servo module) is responsible for the transmission...
About how much does it cost to repair a left front axel that caused my transmission fluid to leak?
If the CV axle shaft is truly bent, as apposed to having just damaged CV joints, such damage will typically only happen in a collision. The axle shafts are very thick strong steel and the impact required to bend a...
doesn't move when i put it in reverse but then i put it in 4 low then reverse and it slips but it moves.
You have the Chrysler 46RE transmission. Among the possible causes of what you describe is a rear servo piston that is sticking or broken, pin bore wear and/or the reverse band is slipping. The servo piston on the 46RE has...