Hello, the brake light is not working
Responses
Eric
221 days ago
Hello and thank you for using JustAnswer. My name is \*\*\*\*\* \*\*\*\*\* I will do my best to assist you. During this conversation you will be given an automated offer for a phone call. You may accept or decline that offer.I don’t personally offer this service so if you take this another tech may call
I’m sorry that you’re having trouble with your vehicle. I will do my best to help you resolve them. Please understand that I do not know your knowledge or capabilities so I may need to ask questions to find out basic information to help solve your specific problem.
My aim is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. Sometimes it may take a moment for me to respond because I may have to look up information about your concern. I appreciate your patience and will provide responses as soon as possible.
Ok, I am confused. You initially state that the BRAKE light is not working, but then mention you replaced the right side low beam HEADLAMP and it did not fix, which makes sense as a headlamp has nothing to do with a rear brake lamp not working
Can you clarify some
Customer
221 days ago
I apologize, I mentioned both lights because i was asked if there was anything else I want to let you know, so I included that. But first yes I’d like to focus on the brake light. I don’t know why it’s not working
Eric
221 days ago
HI
Ok, with only 1 brake light out, the eliminates both the brake light switch and fuse as both supply all 3 brake lights - left, right, center mounted.
So, either the lamp socket is faulty or a short in the white with black striped wire that runs to the brake lamp. It would be between where it splits off from the white/black wire at the left brake lamp and the right brake lamp connector.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
The price of unplugging the EGR passage
It depends on the car and what you need to do. I’ve got a video “unplug the EGR low-flow with a speedometer cable (https://www.youtube.com/watch?v=6_eSvvuQm1E)” and a lot of times they work pretty well. You unbolt the EGR valve and then...
Squeaky noise coming from the passenger side of my car
If you had the compliance bushings replaced, you most likely have bad lower ball joints (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-ball-joint-rear) or a problem with the rear bushings on the control arm. Have the joints checked by holding your hand on them while someone bounces...
Was a loud tapping noise while accelerating, and then put in new alternator and got oil change, woke up this morning and want st
You need to look at the oil pressure sending unit just above the oil filter to see if it got damaged when changing the oil filter. If it is the sending unit, then replace it since the fuel pressure will...
Loud chatter at idle only
Hello, thanks for writing in. If the flexplate was changed within the last year, then I would usually start by isolating that area of the noise. This noise can occur if the bolts are coming loose. If they are fine...
My heater/air conditioner blows out hot and cold air appropriately, but makes a horrible grinding noise
This is a sign of a faulty blower motor. As you know, these have electric motors in them that wear out over time and will begin to make squeaking or grinding noises as the bearings begin to wear out. The...
Oil change
Oil and filter change intervals are specified by vehicle manufacturers, not mechanics, in carefully considered and prepared "maintenance schedules". Mechanics do not have the necessary field test data, or laboratory data, to wisely specify oil change intervals other than what...
When accelerating my steering wheel shimmers, like a slight wobble only while accelerating
Failure of the outer CV joints would more likely cause audible clicking or clunking on turns and not vibration. And, if the rubber boots are intact on the driveshafts (especially on the outer CV joints), it is not likely there...
My 2005.1 Audi S4 Avant starts when the engine is cold just fine, however when it's warmed up it won't start. Cranks won't catch
Hi there. When a car is hard to start when it is warmed up or hot, it's typically due to a fuel system issue; ranging from a mass air flow sensor that is faulty, clogged fuel injectors or a throttle...
Catalytic converter
I would first check with another exhaust shop to get a second opinion. Sometimes the metal used or the flex pipe location will not allow a new pipe to be welded in.
Browse other content
Services
Estimates
Cities
Hello, the brake light is not working Mechanic's Assistant: Have you checked the brake fluid? How's the level and when was it last changed? Where do I check for the brake fluid Mechanic's Assistant: What is the ma...
Hello, the brake light is not working Mechanic's Assistant: Have you checked the brake fluid? How's the level and when was it last changed? Where do I check for the brake fluid Mechanic's Assistant: What is the make/model/year of your car? Acura TSX 2004 Mechanic's Assistant: Are you fixing your TSX yourself? What have you tried so far? No I have a machanic I trust but I want to know what the problem is to have an idea Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Yes, I tried changing the right low beam headlight bulb but it still didn’t work