Volvo XC40 Recharge Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(1,662)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(1,662)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a Volvo XC40 Recharge Oil level is low Inspection is $146 with $0 for parts and $146 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Volvo XC40 RechargeElectricService typeOil level is low InspectionEstimate$155.00Shop/Dealer Price$158.60 - $161.30
2023 Volvo XC40 RechargeElectricService typeOil level is low InspectionEstimate$145.99Shop/Dealer Price$147.82 - $149.20
2021 Volvo XC40 RechargeElectricService typeOil level is low InspectionEstimate$145.99Shop/Dealer Price$147.85 - $149.24
Show example Volvo XC40 Recharge Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(1,662)

Rating Summary
1,556
55
11
7
33
1,556
55
11
7
33

Jason

33 years of experience
617 reviews
Jason
33 years of experience
Volvo XC90 L6-3.2L - Alternator - Santa Clara, California
Very professional and knowledgeable

John

33 years of experience
1126 reviews
John
33 years of experience
Volvo 940 L4-2.3L - Car is not starting - Friendswood, Texas
John is friendly, helpful, and easy to work with. I would high recommend his services. This is my third time I have called on him for his services on different vehicles. Great mechanic!

Chuck

18 years of experience
464 reviews
Chuck
18 years of experience
Volvo S80 L6-3.2L - Brakes, Steering and Suspension Inspection - Allen, Texas
Chuck was prompt and very honest in his recommendations of what repairs my car needed. Gave detail explanations why repairs were required.

Simon

28 years of experience
378 reviews
Simon
28 years of experience
Volvo S70 L5-2.4L - Oil Change - Washington, District of Columbia
He was great! He showed up on time and completed everything quickly.

Excellent Rating

(1,662)

Rating Summary
1,556
55
11
7
33
1,556
55
11
7
33
Number of Volvo services completed
18282+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 BMW 335d
Of Of all of the BMW 3-Series models available in this model year, the 2012 BMW 335d is one of the most powerful and subtlest on the road. This 4-dour sedan may look mild-mannered enough, but under the hood it’s...
North Dakota Parking Laws: Understanding the Basics
When When you are driving in North Dakota, you need to know more than just the rules of the road. You also need to know the rules of parking to make sure that you do not park in a location...
Insurance Requirements for Car Registration in South Carolina
The The state of South Carolina requires that all drivers carry liability insurance, or “financial responsibility,” on their vehicles in order to operate a vehicle legally and maintain vehicle registration. The minimum financial responsibility requirements for South Carolina drivers are...

How do I reset the oil change due Warning Light?

The oil change due Warning Light will be displayed on your electronic vehicle information center (EVIC) display screen. The indicator is cycle-based, so it may not go off even when you have your oil changed. Resetting the oil change due...

Blinker blinking too fast

Hello. The most common cause of this is either a bad body control module or a bad ground. Most of the time this is from a short in the body control module. I would typically start by checking the connections...

Steaming of the engine

Hi, thanks for writing in. Codes P0107 (https://www.yourmechanic.com/article/-p0107-obd-ii-trouble-code-manifold-air-pressure-map-barometric-pressure-sensor-circuit-low-voltage-input-problem-by-john-nelson) and P0122 (https://www.yourmechanic.com/article/p0122-obd-ii-trouble-code-throttle-pedal-position-sensor-switch-tps-a-circuit-low-input-by-jay-safford) could show up for several reasons, such as a faulty mass air flow sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-mass-airflow-sensor). If you would like help, consider having an expert automotive technician from YourMechanic come...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com