Volvo V90 Cross Country Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Volvo V90 Cross Country Water Pump Replacement is $1418 with $998 for parts and $420 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Volvo V90 Cross CountryL4-2.0L TurboService typeWater Pump ReplacementEstimate$2460.24Shop/Dealer Price$2969.85 - $4474.38
2017 Volvo V90 Cross CountryL4-2.0L TurboService typeWater Pump ReplacementEstimate$2506.21Shop/Dealer Price$3011.43 - $4512.68
Show example Volvo V90 Cross Country Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(10)

Rating Summary
8
0
0
0
2
8
0
0
0
2

Ryan

9 years of experience
16 reviews
Ryan
9 years of experience
Volvo V90 Cross Country L4-2.0L Turbo - Oil Change - Philadelphia, Pennsylvania
I did an oil change with him. Ryan showed up even little earlier and was very thorough and detail-oriented. He did every step very carefully and even wiped off the area. I appreciate his professionalism.

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Volvo 960 L6-2.9L - Water Pump - Irvine, California
Knowledgeable, friendly, fast service

Rusty

24 years of experience
567 reviews
Rusty
24 years of experience
Volvo S60 L5-2.5L Turbo - Water Pump - Arlington, Texas
Very professional

Grzegorz

42 years of experience
473 reviews
Grzegorz
42 years of experience
Volvo S60 L5-2.5L Turbo - Water Pump - Pacifica, California
Very helpful and professional. Thanks Gregory.

Excellent Rating

(10)

Rating Summary
8
0
0
0
2
8
0
0
0
2
Number of Volvo Water Pump Replacement services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

P2136 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch A/C Voltage Correlation
What What the P2136 code means? P2136 is an OBD-II generic code for the engine control module (ECM) detecting the throttle pedal position sensors A and C voltages do not correlate to each other for return voltage to the ECM....
B1901 OBD-II Trouble Code: Air Bag Crash Sensor #1 Feed/Return Circuit Short to Ground
B1901 means there is a circuit error with the air bag crash sensor #1, likely due to damaged electrical components or a bad sensor.
P2059 OBD-II Trouble Code: Reductant Injection Air Pump Control Circuit/Open
P2059 P2059 code definition Reductant Injection Air Pump Control Circuit/Open What the P2059 code means P2059 is an OBD-II generic code indicating that the Engine Control Module (ECM) detects that the reductant injection air pump control circuit has an open...

Car running badly after engine rebuild

If you are able to start your vehicle and keep it running with high RPM's the issue may not be with your wiring inside. The issue could still be out in the engine bay area. There are so many variables...

Bluish exhaust smoke upon startup

With higher mileage like your vehicle has, the exhaust valve stem seals wear, allowing a tiny amount of oil to seep onto the exhaust valve while the car is sitting. When you start it up, this oil is burned up...

Will throttle body cause powertrain warning light to come on in my 2005 Jaguar X-type

Hello. If the throttle body is failing then it can cause the vehicle to go into reduced power mode and set a code in the computer. I usually start by scanning the computer for codes. By doing this I can...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com