Volvo V60 Car starts and then dies Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(9)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(9)

Car starts and then dies Inspection Service

How much does a Car starts and then dies Inspection cost?

On average, the cost for a Volvo V60 Car starts and then dies Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Volvo V60L6-3.0L TurboService typeCar starts and then dies InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2019 Volvo V60L4-2.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2021 Volvo V60L4-2.0L Turbo HybridService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Volvo V60L4-2.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2015 Volvo V60L5-2.5L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2016 Volvo V60L5-2.5L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Volvo V60L6-3.0L TurboService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2018 Volvo V60L4-2.0L TurboService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Volvo V60 Car starts and then dies Inspection prices

Starting a vehicle only to have it quit immediately after can be confusing and annoying for many drivers especially if their vehicle has not experienced this type of issue before. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle may quit unexpectedly.

How this system works:

To start a vehicle, the electrical system, composed of the battery and starter, turns the engine over. Once running, the engine requires a constant flow of gasoline and good spark to keep that fuel igniting. If gasoline is not readily available, or if there is not enough spark, the engine will quit. More modern vehicles with sophisticated computers may affect the way the vehicle runs. These computers help the car run efficiently but can also shut a car down if the fuel/air mixture is not correct. While an older vehicle may be less sophisticated and easier to diagnose, the computers on modern cars can provide more specific information when connected to a code scanner/reader.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a sensor begins to fail, the vehicle’s computer may generate an error code to indicate that something has gone wrong. An issue with the mass airflow sensor may manifest itself when a car starts and then stalls soon after starting.

  • Fuel Pump Relay: The fuel pump relay functions much like a fuse for an electric fuel pump. The fuel pump relay engages as the vehicle is started and starts the fuel pump. While the vehicle is running, the fuel pump relay turns off and the fuel pump is powered by the oil pressure sending unit. If the vehicle’s computer is unable to keep the fuel pump relay running throughout the starting process, the vehicle may start and quit immediately after starting.

  • Ignition Coil: Your vehicle’s ignition coil takes the low voltage of the battery and provides the thousands of volts needed to create a spark in the spark plugs. When an ignition coil begins to fail, it may struggle to provide consistent spark to the plugs, causing the engine to stall after starting.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why the vehicle starts and then dies. The mechanic will then provide a detailed inspection report outlining why the vehicle quit and the cost of any repairs that need to be made.

How it's done:

A mechanic will begin diagnosing your vehicle’s issue by plugging a code reader/scanner into the vehicle’s computer. The mechanic should be able to get more information from your vehicle’s computer on what component has failed. Using this information, the mechanic can begin necessary repairs.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic should check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

If the mechanic suspects an issue with the fuel pump relay, he or she should check the vehicle’s computer for a problem. If the vehicle’s computer is having difficulty providing consistent power to the fuel pump relay, the computer may need to be reprogrammed or replaced. If the vehicle’s computer is functioning normally, the mechanic may need to replace the fuel pump relay.

If the mechanic suspects that the ignition coil may be faulty, he or she should first disconnect the battery before beginning work. The mechanic should then begin the process of disconnecting wires from the ignition coil and removing it from the engine bay. The mechanic will then install the new ignition coil and ensure that it is connected properly. The mechanic should then reconnect the battery and test the new coil.

With all repairs, the mechanic will ensure the newly installed parts work properly. The mechanic can then turn off and warning lights that may have come on while the vehicle was not running properly.

How important is this service?

If your vehicle is starting but dying soon after starting, you should have it checked out by a mechanic. Issues involving the fuel management and electrical systems will become worse if not dealt with. Diligence and paying attention to warning lights may help prevent further damage to critical engine component and may save money in repairs. A vehicle that quits after starting can be inconvenient and having a mobile mechanic inspect and repair you vehicle will ensure that you and your vehicle are back on the road soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

Brian

23 years of experience
668 reviews
Brian
23 years of experience
Volvo V60 L4-2.0L Turbo - Oil Change - Jacksonville, Florida
My experience was excellent. Easy, quick, competent. I will do this from now on

Shawn

12 years of experience
291 reviews
Shawn
12 years of experience
Volvo V60 L6-3.0L Turbo - Pre-purchase Car Inspection - Boyertown, Pennsylvania
Excellent service and I would highly recommend Shawn!

Michael

27 years of experience
95 reviews
Michael
27 years of experience
Volvo V60 L4-2.0L Turbo - Oil Change - Houston, Texas
Michael was early both times, a whole day early the second time so that was awesome!! Also was a huge plus that he came back to finish the job when he didn't necessarily have to so thanks so much Michael that the real deal!

Brian

23 years of experience
668 reviews
Brian
23 years of experience
Volvo V60 L4-2.0L Turbo - Tire Rotation - Jacksonville, Florida
prefect and soo easy

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Volvo V60 services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How to Make Your Car Payment
Typically, Typically, you don’t have the whole purchase price in cash when you purchase a vehicle. When that happens, you can set up a loan with a financial institution or lender to borrow the funds you need to pay for...
P2453 OBD-II Trouble Code: Particulate Matter Trap Differential Pressure Sensor Signal Performance
P2453 P2453 code definition Particulate Matter Trap Differential Pressure Sensor Signal Performance What the P2453 code means This trouble code will only appear on diesel engines and it indicates that the powertrain control module has detected a voltage reading from...
C1104 OBD-II Trouble Code: Traction Control Active Lamp - Circuit Short to Battery
Trouble code C1104 means the Engine Control Unit (ECU) has registered a short circuit issue in the traction control lamp.

Manual clutch not giving much resistance

Hello. If the manual clutch does not have very much resistance and you are having trouble shifting into First Gear and Reverse, the clutch master cylinder (https://www.yourmechanic.com/services/clutch-master-cylinder-replacement) and slave cylinder (https://www.yourmechanic.com/services/clutch-slave-cylinder-replacement) need to be replaced. These components work together to...

Low oil pressure - 2000 Chevrolet S10

With the weight of the oil, 5w-30 is preferred in climates that see temps below 0 degrees, and 10w-30 for 0 degrees and above. With that said, it is not unusual to see a drop in oil pressure when the...

Just bought a 2011 CR-V yesterday, and now I'm noticing a very loud grinding noise when backing up and turning left. Any ideas?

It is possible that something could be rubbing against your brakes or wheels as you are backing up. In this circumstance, I would recommend having your brakes inspected by a qualified professional to determine the exact cause of the sound....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com