Volvo 240 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Volvo 240 Mass Airflow Sensor Replacement is $343 with $248 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Volvo 240L4-2.3LService typeMass Airflow Sensor ReplacementEstimate$610.59Shop/Dealer Price$744.49 - $1123.69
1991 Volvo 240L4-2.3LService typeMass Airflow Sensor ReplacementEstimate$590.59Shop/Dealer Price$724.51 - $1103.72
1992 Volvo 240L4-2.3LService typeMass Airflow Sensor ReplacementEstimate$590.59Shop/Dealer Price$724.51 - $1103.72
1993 Volvo 240L4-2.3LService typeMass Airflow Sensor ReplacementEstimate$590.59Shop/Dealer Price$724.49 - $1103.68
Show example Volvo 240 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1

Robert

15 years of experience
32 reviews
Robert
15 years of experience
Volvo 240 L4-2.3L - Starter - Frisco, Texas
Very knowledgeable and got the job done quickly

Tinashe

13 years of experience
609 reviews
Tinashe
13 years of experience
Volvo 240 L4-2.3L - Car is not starting - Alpharetta, Georgia
Very professional and working with me to correct issue. Booked for wrong problem. He found real problem immediately and booked new appointment today.

Sami

21 years of experience
69 reviews
Sami
21 years of experience
Volvo 240 L4-2.3L - Starter - Alexandria, Virginia
Holy wow! I've worked on my Volvo 240 for twenty years and was stumped by the starter, Sami arrived on time and installed a new starter in an hour.... great job! Works like a charm!

Nezar

26 years of experience
67 reviews
Nezar
26 years of experience
Volvo 240 L4-2.3L - Alternator Repair - Boca Raton, Florida
It was awesome. He showed up early was friendly and knowledgeable. He finished the job in a reasonable amount of time and showed me that the work had been completed.

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1
Number of Volvo 240 services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Coolant Level Sensor
If the Coolant Light stays on permanently, there is low coolant, or the engine is overheating, you may have to replace the coolant level sensor.
Symptoms of a Bad or Failing Crankshaft Position Sensor
Common signs of a faulty crankshaft position sensor include issues starting the vehicle, intermittent stalling, and the Check Engine Light coming on.
How Long Does an Injector Control Pressure Sensor Last?
A A diesel engine is a very sensitive and complicated piece of machinery. Getting a diesel to crank will require a number of parts to work together. Among the most vital systems on a diesel engine is the fuel injection....

Warning lights on the dash are always lit up

The O2 sensors on on this vehicle are a known issue, and generally speaking when the O2 sensors go bad they affect the Stability control system. There have been multiple instances of these sensors failing on Toyota's between 60-70K miles....

Check Engine light going on and off

Elaborating on the codes specifically can help us get more insight on your issue. Multiple tools will be required depending on the codes you received. I would recommend having a mechanic scan the codes (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) from the computer that you...

My 06 PT Cruiser will not start and the Check Engine Light is on. It turns but will not start, what does this mean?

Hello - first task is to determine what problem codes are set with the Check Engine Light. It is possible this is a problem with the wireless control module being "locked up". There is a Chrysler technical service bulletin (https://www.yourmechanic.com/article/how-to-use-a-technical-service-bulletin-tsb-to-diagnose-and-repair-a-car-by-valerie-johnston)...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com