logo

Volvo 240 Brake Drum Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(18)

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Volvo 240 Brake Drum Replacement is $327 with $222 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Volvo 240L4-2.3LService typeBrake Drum ReplacementEstimate$570.61Shop/Dealer Price$692.64 - $1033.98
1993 Volvo 240L4-2.3LService typeBrake Drum ReplacementEstimate$548.61Shop/Dealer Price$670.66 - $1012.02
1992 Volvo 240L4-2.3LService typeBrake Drum ReplacementEstimate$548.61Shop/Dealer Price$670.66 - $1012.01
1991 Volvo 240L4-2.3LService typeBrake Drum ReplacementEstimate$548.61Shop/Dealer Price$670.63 - $1011.97
Show example Volvo 240 Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Volvo 240 services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(18)
Rating Summary
17
0
0
0
1
17
0
0
0
1

Sami

21 years of experience
69 reviews
Request Sami
Sami
21 years of experience
Request Sami
by Mark
Volvo 240 L4-2.3L - Starter - Alexandria, Virginia
Holy wow! I've worked on my Volvo 240 for twenty years and was stumped by the starter, Sami arrived on time and installed a new starter in an hour.... great job! Works like a charm!

Nezar

26 years of experience
68 reviews
Request Nezar
Nezar
26 years of experience
Request Nezar
by James
Volvo 240 L4-2.3L - Alternator Repair - Boca Raton, Florida
It was awesome. He showed up early was friendly and knowledgeable. He finished the job in a reasonable amount of time and showed me that the work had been completed.

Danny

11 years of experience
269 reviews
Request Danny
Danny
11 years of experience
Request Danny
by Christian
Volvo 240 L4-2.3L - Pre-purchase Car Inspection - Feasterville Trevose, Pennsylvania
What a sweet, smart man. Very well done.

Tien

23 years of experience
903 reviews
Request Tien
Tien
23 years of experience
Request Tien
by Jim
Volvo 240 L4-2.3L - Brake Light Switch - Dublin, California
Tien took care of the repair very quickly! Definitely recommend.

Excellent Rating

(18)
Rating Summary
17
0
0
0
1
17
0
0
0
1
Number of Volvo 240 services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

How to Buy Good Quality Rims
Keeping Keeping your vehicle wheeling along requires more than just tires – you also need rims; and not necessarily some super-slick shiny monster rims, either. The size of the wheels and the rims are important and relate directly to how...
Read more
How to Replace the Oil Temperature Sensor on Most Cars
Oil, as well as the oil temperature sensor, is crucial to the engine lubrication system. A bad sensor can lead to leaks and poor vehicle performance.
Read more
How to Replace Car Heater Hoses
Car heater hoses move coolant from the engine to the heater core and can overheat and break down if there is a coolant leak.
Read more

How do I turn on the windshield wipers?

The windshield wipers are a key safety feature that give you visibility when it is raining. The windshield wipers are controlled by the windshield wiper lever, which protrudes from the right side of the steering wheel. To turn on the...
Read more

Low oil pressure

Only a couple of things could cause this issue. Low oil is the most likely cause and under that would be a bad oil pump. The first thing I would do is check the oil level. If the oil level is...
Read more

I cleaned the ECM/PCM and now my car won't stay on

Whenever the ECM is disconnected the idle control settings the ECM has stored in memory will be cleared. The ECM will revert to the factory-new settings and since the engine now has high mileage and the need for adjustments to...
Read more
  1. Home
  2. Estimates
  3. Volvo
  4. 240
  5. Brake Drum Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com

Read FAQ
GET A QUOTE