Volkswagen Golf Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(272)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(272)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Volkswagen Golf Wheel Bearings Replacement is $150 with $10 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Volkswagen GolfL4-1.9L Turbo DieselService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$557.96Shop/Dealer Price$655.27 - $937.48
2010 Volkswagen GolfL4-2.0L Turbo DieselService typeWheel Bearings - Passenger Side Front ReplacementEstimate$355.45Shop/Dealer Price$399.25 - $525.28
2003 Volkswagen GolfL4-1.8L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$547.15Shop/Dealer Price$642.37 - $923.01
2005 Volkswagen GolfL4-1.9L Turbo DieselService typeWheel Bearings - Driver Side Rear ReplacementEstimate$547.15Shop/Dealer Price$642.37 - $923.01
2005 Volkswagen GolfL4-1.8L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$547.15Shop/Dealer Price$644.14 - $926.10
2004 Volkswagen GolfL4-1.8L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$288.69Shop/Dealer Price$319.46 - $406.38
2011 Volkswagen GolfL4-2.0L Turbo DieselService typeWheel Bearings - Driver Side Rear ReplacementEstimate$317.63Shop/Dealer Price$362.41 - $492.55
2014 Volkswagen GolfL4-2.0L Turbo DieselService typeWheel Bearings - Driver Side Rear ReplacementEstimate$317.63Shop/Dealer Price$362.40 - $492.52
Show example Volkswagen Golf Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(272)

Rating Summary
255
7
3
1
6
255
7
3
1
6

Michael

15 years of experience
55 reviews
Michael
15 years of experience
Volkswagen Golf L5-2.5L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Keller, Texas
He went above and beyond to provide me with great service!

Steve

16 years of experience
187 reviews
Steve
16 years of experience
Volkswagen Golf L5-2.5L - Oil Change - Clifton, New Jersey
Steve is always great and thorough!

Cornelius

19 years of experience
101 reviews
Cornelius
19 years of experience
Volkswagen Golf L4-2.0L - Brake Pads Replacement (Front, Rear) - Mableton, Georgia
Always on time, professional, knowledgeable, and efficient. We've had him out three times now, twice to diagnose/fix our old beater and once to inspect our new (used) car before we bought it. Always a pleasure to work with.

Rigoberto

12 years of experience
739 reviews
Rigoberto
12 years of experience
Volkswagen Golf L4-2.0L - Oil Pressure Sensor Replacement - Chicago, Illinois
Very nice did a excellent job today would recommend him to family and friends

Excellent Rating

(272)

Rating Summary
255
7
3
1
6
255
7
3
1
6
Number of Volkswagen Golf services completed
2992+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Throttle Control Cable
Common signs include improper cable adjustment, slow acceleration response, a dirty or frayed cable, and cruise control not working properly.
P0069 OBD-II Trouble Code: Manifold Absolute Pressure/Barometric Pressure Correlation
P0069 P0069 Code Definition Manifold Absolute Pressure/Barometric Pressure Correlation What the P0069 code means What this code means is that the Powertrain Control Module is detecting contradictory readings from the manifold absolute pressure sensor and the barometric pressure sensor. What...
How to Identify Any Car You See
Have Have you ever looked at a car driving by or parked on the side of the road and thought, “I wonder what that is?” You’re not alone. Most people spend their lives around cars and yet only a small...

What is the Global Open Windows system?

If your car is equipped with it, the Global Open Windows system lets you operate the driver and passenger front windows and the moon roof with your remote. Here’s what you need to know: The Unlock button on your remote...

Fixed wheel bearings and tie rod - still making humming sound front passenger side at 40mph. What else can this be?

Hi there. If this noise still persists, then you either have a tire issue or a differential problem. I usually check the tire tread to see if it is worn unevenly (https://www.yourmechanic.com/article/why-do-tires-wear-unevenly). If it is, then this noise will occur....

I have a 2009 PT cruiser with a p302 code coming on only at idle speed. It also has poor/slow acceleration, especially up a hill

The misfire is most likely from a vacuum leak either in the PCV hose or valve or the intake manifold itself has a leak in the housing. Replace the PCV valve and check PCV hose and then if problem continues...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com