Volkswagen Fox Cruise control is not working Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4,498)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4,498)

Cruise control is not working Inspection Service

How much does a Cruise control is not working Inspection cost?

On average, the cost for a Volkswagen Fox Cruise control is not working Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Volkswagen FoxL4-1.8LService typeCruise control is not working InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1989 Volkswagen FoxL4-1.8LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 Volkswagen FoxL4-1.8LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 Volkswagen FoxL4-1.8LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1990 Volkswagen FoxL4-1.8LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1992 Volkswagen FoxL4-1.8LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1987 Volkswagen FoxL4-1.8LService typeCruise control is not working InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
Show example Volkswagen Fox Cruise control is not working Inspection prices

Cruise control can be very convenient when on a long drive or when on the highway. By setting a speed, you can relax your foot and let the vehicle maintain speed. More modern cruise control systems even allow you to maintain speed and a certain distance behind the vehicle in front of you. When cruise control fails, it can be annoying, but when it fails suddenly it may be dangerous. A sudden failure by the cruise control may mean your vehicle is rapidly decelerating. Even when cruise control is on, it is important to remain a vigilant driver.

How this system works:

Cruise control systems have changed as cars have become more modern. Newer cars use a fully electronic setup to maintain speed and may be able to maintain speed and distance behind the car in front of you. These systems are controlled through the vehicle’s computer or ECU (electronic control unit). Older cars may use what is called electromechanical cruise control. In this setup, a vacuum actuator is physically connected to the throttle by a cable or chain. The cable adjusts to increase or decrease throttle position based upon the actions of the actuator. A mechanic will let you know what kind of setup you have on your vehicle.

Common reasons for this to happen:

  • Bad Fuse: Like many electronically controlled systems in your car, the cruise control has a corresponding fuse which will blow to protect the system if it senses a short circuit. When the fuse of for the cruise control blows, the cruise control will stop working altogether.

  • Failing Brake Pedal Switch: The brake pedal switch turns on the vehicles brake lights when it senses that the brake pedal has been pressed. Because cruise control systems have been designed to disengage when the brake pedal is pressed, the cruise control is wired to the brake pedal switch. If the brake pedal switch fails, the car may think the brakes are engaged and not allow the cruise control system to turn on.

  • Failing Speed Sensor: A speed sensor has many purposes including indicating the speed of the vehicle, regulating flow of fuel and ignition timing, and operating the cruise control. If the speed sensor fails the cruise control may stop working. You may also notice that the speedometer has stopped working and the engine has more difficulty when idling.

  • Damaged Vacuum Actuator/Hoses/Cable: On older vehicles, cruise control speed is maintained using a vacuum actuator and a cable connected to the throttle. A vehicle’s cruise control may stop working if the vacuum actuator has stopped working or if there is damage to the vacuum hoses. The system may also fail if the cable linking the actuator to the throttle is broken.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s cruise control system has stopped working. The mechanic will then provide a detailed inspection report outlining the nature of the system failure and the cost of any repairs that need to be made.

How it's done:

The mechanic will first want to connect to the vehicle’s ECU through a code reader/scanner. This will allow the mechanic to read and trouble codes and better diagnose what component may have failed.

If the mechanic determines that there is a bad fuse, he or she will find the corresponding fuse for the cruise control system to see if it has failed. If the fuse has blown, the mechanic will remove it and replace it with a fuse rated for the correct amperage.

If the mechanic believes that the brake pedal switch has failed, he or she will examine the switch to check for any superficial damage. The mechanic should then check the wiring connected to the switch and change it if necessary. When the switch has been replaced, the mechanic should make sure that both the brake lights and the cruise control system are working properly.

To check the speed sensor, the mechanic will have to get underneath the vehicle. While underneath, the mechanic will find the sensor and examine it and the surrounding wires for damage. The mechanic will then replace the sensor and then check the wires going from the sensor up to the speedometer and cruise control switches to endure that they are not frayed.

If the mechanic believes that the vacuum actuator or the corresponding hoses and cable have failed, he or she will open the hood and locate the actuator. The mechanic will first check the hoses and cable to make sure that they are in good working order. He or she will then replace the actuator as necessary.

In all of these repair scenarios the mechanic will ask to test drive the vehicle to make sure that the cruise control is working properly. He or she should also use their code reader/scanner to clear any trouble codes that may have been produced when the cruise control system was not working.

How important is this service?

A failed cruise control system can be a signal that other repairs may need to be made soon. By examining the cruise control, the mechanic is likely to also inspect other systems on the car including the brake lights and speedometer. While driving without cruise control may be an inconvenience, a sudden failure of the cruise control system could be potentially dangerous for a driver who is not vigilant. If you notice that your vehicle’s cruise control has stopped working you should have a mechanic check it to determine the nature of the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(4,498)

Rating Summary
4,221
137
32
27
81
4,221
137
32
27
81

Rodney

36 years of experience
561 reviews
Rodney
36 years of experience
Volkswagen Fox L4-1.8L - Brake System Inspection - Sacramento, California
Rodney arrived on time for the appointment and was able to diagnose the problem with my car almost immediately. He delved deeper into the area the problem was just to make sure, and his initial diagnosis was correct. He was very friendly and capable, and I look forward to booking his services for any car troubles I have in the future.

Eliud

23 years of experience
219 reviews
Eliud
23 years of experience
Volkswagen EuroVan V6-2.8L - Cruise control is not working - Loganville, Georgia
Eliud was knowledgeable but he couldn’t fix my problem in the time allotted. Although my vehicle is unusual.

Matthew

33 years of experience
1273 reviews
Matthew
33 years of experience
Volkswagen Routan V6-3.6L - Cruise control is not working - Norfolk, Virginia
Matthew arrived on time and was very good at explaining clearly the issues with my vehicle.

Robert

25 years of experience
10 reviews
Robert
25 years of experience
Volkswagen Jetta L4-2.0L - Spark Plugs - Portland, Oregon
Robert was fantastic. He was very thorough during our appointment; he discussed, and even showed me, the wear-and-tear on parts he replaced and offered helpful observations about the condition of my vehicle; he really made me feel like my car was in good hands. He did not push me in to additional repairs, as often happens when you visit a mechanic. This was my first experience with YourMechanic and Robert answered all the questions which I had about YourMechanic and how it works. He was extremely friendly and I will absolutely request him on any future repairs and maintenance. I really liked the convenience and affordability of YourMechanic and most of all I highly recommend Robert!

Excellent Rating

(4,498)

Rating Summary
4,221
137
32
27
81
4,221
137
32
27
81
Number of Volkswagen services completed
49478+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

The Guide to Legal Car Modifications in Missouri
ARENA Creative / Shutterstock.com If you live in Missouri and want to modify your vehicle, or if you are moving to the state with a car or truck that you have customized, it is important that you...
The Guide To Colored Curb Zones in South Carolina
South South Carolina parking laws: understanding the basics When parking in South Carolina, you need to make sure you understand the rules and laws that are in place. Knowing these will not only help to keep you from getting fines...
B1917 OBD-II Trouble Code: Air Bag Memory Clear Circuit Failure
B1917 means there the air bag memory clean circuit has failed, likely due to defective wires or connectors.

Car dies, goes into safe mode after I jump the battery.

While you may be jumping your battery correctly, your Audi A3 is equipped with an immobilizer that keeps the vehicle from being started without use of the proper key programmed for the vehicle. What you are describing sounds like a...

There is no power and is shaking in overdrive.

The Mass Air Flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) (MAF) may be dirty and causing the throttle position sensor to act up. Remove the MAF and clean it with electrical cleaner and then put it back on. Check all the hose clamp connections...

Hi i haver a 1990 Ford f150 XT lariat 5.0 ir hás two tank the one in end rear is out only running on center tank. Now ive replaced the fuel pump relay and fuel fuse and then i turn the key and waited for the fuel pump to klick on and it started. I waited for 3 houve tryed it again turn the key to hear the klick from the fuel pump but it didnt do it and it Will not start can you help

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com