Volkswagen Eos Car starts and then dies Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(85)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(85)

Car starts and then dies Inspection Service

How much does a Car starts and then dies Inspection cost?

On average, the cost for a Volkswagen Eos Car starts and then dies Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Volkswagen EosL4-2.0L TurboService typeCar starts and then dies InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2013 Volkswagen EosL4-2.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Volkswagen EosL4-2.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2011 Volkswagen EosL4-2.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2012 Volkswagen EosL4-2.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2014 Volkswagen EosL4-2.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Volkswagen EosL4-2.0L TurboService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2008 Volkswagen EosL4-2.0L TurboService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Volkswagen Eos Car starts and then dies Inspection prices

Starting a vehicle only to have it quit immediately after can be confusing and annoying for many drivers especially if their vehicle has not experienced this type of issue before. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle may quit unexpectedly.

How this system works:

To start a vehicle, the electrical system, composed of the battery and starter, turns the engine over. Once running, the engine requires a constant flow of gasoline and good spark to keep that fuel igniting. If gasoline is not readily available, or if there is not enough spark, the engine will quit. More modern vehicles with sophisticated computers may affect the way the vehicle runs. These computers help the car run efficiently but can also shut a car down if the fuel/air mixture is not correct. While an older vehicle may be less sophisticated and easier to diagnose, the computers on modern cars can provide more specific information when connected to a code scanner/reader.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a sensor begins to fail, the vehicle’s computer may generate an error code to indicate that something has gone wrong. An issue with the mass airflow sensor may manifest itself when a car starts and then stalls soon after starting.

  • Fuel Pump Relay: The fuel pump relay functions much like a fuse for an electric fuel pump. The fuel pump relay engages as the vehicle is started and starts the fuel pump. While the vehicle is running, the fuel pump relay turns off and the fuel pump is powered by the oil pressure sending unit. If the vehicle’s computer is unable to keep the fuel pump relay running throughout the starting process, the vehicle may start and quit immediately after starting.

  • Ignition Coil: Your vehicle’s ignition coil takes the low voltage of the battery and provides the thousands of volts needed to create a spark in the spark plugs. When an ignition coil begins to fail, it may struggle to provide consistent spark to the plugs, causing the engine to stall after starting.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why the vehicle starts and then dies. The mechanic will then provide a detailed inspection report outlining why the vehicle quit and the cost of any repairs that need to be made.

How it's done:

A mechanic will begin diagnosing your vehicle’s issue by plugging a code reader/scanner into the vehicle’s computer. The mechanic should be able to get more information from your vehicle’s computer on what component has failed. Using this information, the mechanic can begin necessary repairs.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic should check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

If the mechanic suspects an issue with the fuel pump relay, he or she should check the vehicle’s computer for a problem. If the vehicle’s computer is having difficulty providing consistent power to the fuel pump relay, the computer may need to be reprogrammed or replaced. If the vehicle’s computer is functioning normally, the mechanic may need to replace the fuel pump relay.

If the mechanic suspects that the ignition coil may be faulty, he or she should first disconnect the battery before beginning work. The mechanic should then begin the process of disconnecting wires from the ignition coil and removing it from the engine bay. The mechanic will then install the new ignition coil and ensure that it is connected properly. The mechanic should then reconnect the battery and test the new coil.

With all repairs, the mechanic will ensure the newly installed parts work properly. The mechanic can then turn off and warning lights that may have come on while the vehicle was not running properly.

How important is this service?

If your vehicle is starting but dying soon after starting, you should have it checked out by a mechanic. Issues involving the fuel management and electrical systems will become worse if not dealt with. Diligence and paying attention to warning lights may help prevent further damage to critical engine component and may save money in repairs. A vehicle that quits after starting can be inconvenient and having a mobile mechanic inspect and repair you vehicle will ensure that you and your vehicle are back on the road soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(85)

Rating Summary
78
7
0
0
0
78
7
0
0
0

Berchel

18 years of experience
101 reviews
Berchel
18 years of experience
Volkswagen Eos L4-2.0L Turbo - Alternator - Edgewood, Maryland
Provided Exceptional information and up-front discussion on planned service and future maintenance of vehicle. On-time, professional and courteous.

Clifton

30 years of experience
289 reviews
Clifton
30 years of experience
Volkswagen Eos L4-2.0L Turbo - Tire Rotation - Boynton Beach, Florida
Cliff was courteous, professional.

Trevor

22 years of experience
185 reviews
Trevor
22 years of experience
Volkswagen Eos L4-2.0L Turbo - Car is not starting - Oceanside, California
Trevor was quick, courteous, and helpful. Maybe it's a common practice, but I've never seen it done; before he completely disconnected the battery, he hooked it up to his car with the jumper cables so that I wouldn't lose all the digital settings in the car. Maybe it's a little thing, but it mattered a lot to me... because the battery could have been successfully replaced even without taking that extra step that only benefited me. Thanks Trevor

Peter

25 years of experience
519 reviews
Peter
25 years of experience
Volkswagen Eos L4-2.0L Turbo - Power Seat is not working - Sherman Oaks, California
Very professional

Excellent Rating

(85)

Rating Summary
78
7
0
0
0
78
7
0
0
0
Number of Volkswagen Eos services completed
935+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

P0203 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 3
P0203 code definition P0203 is a general OBD2 code that points to a fault in the injector circuit. Note: This code is...
P0181 OBD-II Trouble Code: Fuel Temperature Sensor 'A' Circuit Range/Performance
P0181 P0181 code definition Fuel Temperature Sensor ‘A’ Circuit Range/Performance What the P0181 code means P0181 is a generic OBD-II code that is triggered when the fuel temperature sensor ‘A’ circuit goes out of specifications during self-testing. This indicates that...
How to Cook Food Using Your Car
Every car has the potential to be a moving kitchen! You can cook food with your car by using engine heat, body panels, or purpose-built appliances.

Van door jammed

Hello. This is a common problem on this van. Most of the time this occurs when the cable snaps inside of the door. When this occurs it can jam up the door internally making it hard or impossible to open...

What could be wrong with my car if the wheel is hard to turn while driving? I put power steering fluid in the car.

There can be many different possible causes of hard power steering. The most common things to check for are a broken power steering pump belt, or a leak that has caused the pump to run out of fluid. A power...

Temperature Guage drops when blower on high.

When the heater is being used the heater blower blows air across the heater core to blow heat on the window for you. The heat is supplied by the engine coolant circulating through the heater core. The use will remove...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com