Toyota Sequoia Car shuts off when stepping on gas pedal Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(299)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(299)

Car shuts off when stepping on gas pedal Inspection Service

How much does a Car shuts off when stepping on gas pedal Inspection cost?

On average, the cost for a Toyota Sequoia Car shuts off when stepping on gas pedal Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Toyota SequoiaV8-5.7LService typeCar shuts off when stepping on gas pedal InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2010 Toyota SequoiaV8-4.6LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2002 Toyota SequoiaV8-4.7LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2011 Toyota SequoiaV8-4.6LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2015 Toyota SequoiaV8-5.7LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2012 Toyota SequoiaV8-5.7LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Toyota SequoiaV8-5.7LService typeCar shuts off when stepping on gas pedal InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2006 Toyota SequoiaV8-4.7LService typeCar shuts off when stepping on gas pedal InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Toyota Sequoia Car shuts off when stepping on gas pedal Inspection prices

Rough idling, frequent stalling, and inconsistent acceleration are all signs that something is amiss with your car. There are a number of systems that can cause this problem. Everything from electrical to fuel delivery to vacuum system issues can all cause a rough-running, stalling vehicle.

Common reasons for this to happen:

Let’s have a look at some of the more common causes that would make your car stall or stumble when you attempt to accelerate.

  • Faulty ignition components: The ignition coil pulls power from the battery and delivers it to the spark plugs, which ignites the fuel and makes the engine run. The car will display a number of symptoms as the ignition system wears.

Misfiring is one of the first symptoms you will see as a symptom of incomplete combustion due to improperly firing ignition components. As the situation progresses you will have trouble starting the vehicle and your fuel economy will drop dramatically. A flashing “Check Engine” light may be associated with this issue.

Finally, as the ignition system reaches the end of its life, your car will misfire and start to stall. Expect the engine to sputter, cough, and jerk, especially at higher speeds. Irregular sparking will cause the car to stall and it may shut off completely when you bring the car to a stop.

  • Faulty fuel pump: The fuel pump moves fuel from the gas tank to the engine. If the fuel pump is malfunctioning, the engine will be getting less fuel than necessary, which will lead to performance issues, and ultimately cause the vehicle not to start.

One of the first signs of a failing fuel pump is hesitation under acceleration. As the problem progresses, the car will lose power when idling, and eventually it may shut down completely.

  • Bad fuel filter: A fuel filter strains the fuel before it reaches the engine, which protects the fuel injectors. They are essential to a well running engine and require regular replacement. If the fuel filter is not replaced at the recommended intervals, the performance and fuel economy of the engine may suffer dramatically.

A failing fuel filter may exhibit similar symptoms to a failing fuel pump. Power loss, especially on acceleration, may be the first sign. As flow continues to be impeded, the fuel filter may ultimately lead to a no-start condition, as fuel can no longer get to the engine.

  • Vacuum leaks: The engine of a car is basically a large air pump. Air is drawn into the cylinders and mixes with fuel that is compressed and ignited. The air is drawn in through a butterfly valve, which creates a vacuum. The vacuum is used to power a number of auxiliary devices.

The tiniest of leaks can cause engine performance problems. Expect a rough or too-fast idle speed. Misfiring or hesitation during acceleration is another common issue with vacuum leaks. As the leak gets worse, the car will begin to stall. A hissing sound and an illuminated “Check Engine” light will typically also be observed.

  • Bad electrical connections: Modern cars have an extensive electrical system, and a bad connection (or bad ground) can cause a number of issues. Dim or flickering lights can be a sign, as well as difficulty starting the car. The car will make a clicking noise, much like a dead battery or loose battery cable.

  • Dirty or defective idle control valve: The idle control valve controls the amount of air that goes into the engine, which allows the computer to maintain the proper engine speed.

When an idle control valve becomes contaminated or stuck, it may lead to an unsteady and rough idle. The car will stall if the valve is too clogged or when it finally fails. If, while holding the accelerator pedal down, a small amount of pressure keeps the car running at a stop, the idle control valve may require attention. In most late model cars, this problem will usually trigger the Check Engine light.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the stalling condition, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All conditions that cause this type of stalling problem are fairly severe and require maintenance as soon as possible. None of them will get better without a repair and as they grow more severe your car may stop running altogether, which presents a safety issue for you and your passengers. If your car shuts down when you step on the gas pedal, runs rough, or stalls frequently, you should book an appointment for one of our mechanic to look at it immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(299)

Rating Summary
284
5
3
1
6
284
5
3
1
6

Damian

11 years of experience
465 reviews
Damian
11 years of experience
Toyota Sequoia V8-4.7L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Lanham, Maryland
I've had Damian come to home twice in the last week. Each time, he replaced the CV axle on my Toyota Sequoia. All I can say is I wish I knew about Your Mechanic earlier. This is the only auto repair service that hasn't left me feeling anxious, upset and poor. In fact, Your Mechanic's prices are so reasonable I've decided to make additional needed repairs. For example, I will next replace the front sway bar end links. Then I will replace the upper and lower ball joints and rear shocks. Through Your Mechanic, preventive maintenance doesn't have to be a luxury.

Patrick

32 years of experience
369 reviews
Patrick
32 years of experience
Toyota Sequoia V8-4.7L - Brake System Inspection - Las Vegas, Nevada
Outstanding. Very knowledgeable and professional.

Joe

43 years of experience
823 reviews
Joe
43 years of experience
Toyota Sequoia V8-4.7L - Battery - Saint Petersburg, Florida
Very nice, good communication, arrived on time, and replace my battery quickly! Will call him again whenever needed!

Neal

12 years of experience
20 reviews
Neal
12 years of experience
Toyota Sequoia V8-4.7L - Valve Cover Gasket - Land O' Lakes, Florida
Neal did an excellent job on my Toyota Sequoia. He communicated very well, arrived on time, started the job promptly and finished in a very reasonable time, including dealing with delays because of rain. He was courteous, professional, friendly. I would easily recommend him to all my friends and family for repairs on their cars.

Excellent Rating

(299)

Rating Summary
284
5
3
1
6
284
5
3
1
6
Number of Toyota Sequoia services completed
3289+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1600+
experts on our platform

Recent articles & questions

How Belt Pulleys Work
There There are two main types of car pulleys: crank pulleys, and accessory pulleys. Most pulleys are driven by a main crank pulley, which is bolted onto the crankshaft. When the engine is operating, the crank pulley rotates, transferring motion...
What are the Car Pool Rules in Florida?
Car Car pool lanes have become increasingly popular in the United States, and Florida is no exception to the new normal. While Florida doesn’t have as many miles of car pool lanes as many other states, they still have a...
B1930 OBD-II Trouble Code: Air Bag Safing Sensor Output Circuit Short To Ground
B1930 means there is a short circuit that is involved with the airbag deployment system's safing sensor, likely due to faulty wiring.

I purchased a new computer for it does it need programed

You would need to have it programmed to your VIN. Have the computer scanned to see if you have a good crank shaft signal first, before replacing the ECM. You may not need the ECM replaced; you may have a...

I replaced the bulb headlight on driver side, why it not working.

Hi there. Thanks for writing in about your 2000 Lexus ES300. Sometimes the bulb is not the reason why the headlight is not working. In fact, some common causes include a bad relay, faulty electrical harness that attaches to the...

New cv axle too short

It appears that the 94-6007 is the correct part number. I'm assuming that this is for the left side, as the axle for the right side is over 10 inches shorter. I would suggest that you measure the compressed length...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com