Toyota Cressida Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Toyota Cressida Wheel Bearings Replacement is $152 with $12 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Toyota CressidaL6-3.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$489.76Shop/Dealer Price$570.02 - $801.08
1991 Toyota CressidaL6-3.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$478.95Shop/Dealer Price$557.09 - $786.56
1990 Toyota CressidaL6-3.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$478.95Shop/Dealer Price$557.12 - $786.61
1992 Toyota CressidaL6-3.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$478.95Shop/Dealer Price$557.12 - $786.61
1992 Toyota CressidaL6-3.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$478.95Shop/Dealer Price$558.89 - $789.70
1991 Toyota CressidaL6-3.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$478.95Shop/Dealer Price$557.29 - $786.90
Show example Toyota Cressida Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0

Diego

22 years of experience
564 reviews
Diego
22 years of experience
Toyota Cressida L6-3.0L - Timing Belt - Laveen, Arizona
Got it done.

Jesse

17 years of experience
127 reviews
Jesse
17 years of experience
Toyota Cressida L6-2.8L - Battery - Daytona Beach, Florida
I am pleased with my experience with Jesse. He did a thorough inspection to try to find what caused my car not to start. He explained what he was checking, along the way, and after every attempt to start the car. He also explained what was needed to, hopefully, get the car up and running. I would use Jesse if ever I have similar problems in the future.

H

27 years of experience
828 reviews
H
27 years of experience
Toyota Cressida L6-2.8L - Oil/Fluid Leak - Santa Clara, California
Honorio was early for the appointment! He patiently listened to my list of attempts to remedy the problem. In addition to checking for the leak he ascertained additional problems on the car, made clear and reasonable recommendations and even volunteered an option for me to do some self-service to save cash. He gave me advice on how to fix this problem if it arises again. I will use him again because of his honesty, clarity and overall business manner.

Brian

23 years of experience
7 reviews
Brian
23 years of experience
Toyota Cressida L6-2.8L - Distributor Rotor and Cap - Portland, Oregon
Brian was timely, efficient, and knowledgeable. Thank you!

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0
Number of Toyota Cressida services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Valve Cover Gasket
Common signs of a faulty gasket include a burning oil smell, dirty valve cover, oil leaks, low engine oil, and a rough-running engine that misfires.
How to Diagnose a Cooling System Problem
You may be driving down the road or sitting at a stop light when you first notice the temperature gauge in your...
How Much Does a Mechanic Make in Oregon?
Automotive technician jobs in Oregon have an average salary of $37k, with some mechanics earning as much as $45k.

How to change fahrenheit to celsius( sonata limited white navigation sistem)

I would recommend going into the settings menu on your head unit. Once you have found the settings menu, locate the settings for the thermometer. Once these settings have been located, you should be prompted to change the measurement from...

I think someone is messing with car without keys, steer wheel moves clockwise while I'm driving, something burns my eyes.

Hello there. To be honest, I wouldn't begin to assume what's causing the smell in your vehicle that is causing medical side effects; as that would simply be irresponsible without being a medical expert. I can say that it is...

SUV, GMC Envoy, 2004, vehicle has no get up and go! Not shifting into gear! Already changed transmission fluid and spark plugs!

If engine speed increases steadily in response to accelerator inputs, then this is probably a transmission related fault. To give you a precise slate of possibilities though I would need to know exactly which gears (which "shift points") are "missing"...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com