Suzuki Aerio Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(39)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(39)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Suzuki Aerio Power Steering Pressure Hose Replacement is $511 with $371 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Suzuki AerioL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$946.86Shop/Dealer Price$1148.43 - $1745.02
2006 Suzuki AerioL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$937.85Shop/Dealer Price$1137.65 - $1732.92
2007 Suzuki AerioL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$937.85Shop/Dealer Price$1137.67 - $1732.96
2002 Suzuki AerioL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$888.19Shop/Dealer Price$1075.60 - $1633.64
2003 Suzuki AerioL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$937.85Shop/Dealer Price$1139.15 - $1735.54
2005 Suzuki AerioL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$937.85Shop/Dealer Price$1137.81 - $1733.21
Show example Suzuki Aerio Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(39)

Rating Summary
34
5
0
0
0
34
5
0
0
0

Okela

14 years of experience
80 reviews
Okela
14 years of experience
Suzuki Aerio L4-2.3L - Check Engine Light is on - Brooklyn, New York
Okela is awesome :)

Chad

36 years of experience
2 reviews
Chad
36 years of experience
Suzuki Aerio L4-2.3L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Orlando, Florida
Exceptional service, knowledge and experience. Will definitely use again.

Kevin

7 years of experience
111 reviews
Kevin
7 years of experience
Suzuki Aerio L4-2.0L - Oil Change - Davenport, Florida
Professional, courteous and cordial. and knowledgable with sincerity to provide optimal customer service in resolving the situation as well as provide provide insightful recommendation for preventive maintenance.

Jordan

9 years of experience
144 reviews
Jordan
9 years of experience
Suzuki Aerio L4-2.0L - Car is not starting Inspection - Davenport, Florida
Excellent and inviting cordial attitude, knowledgable and demonstrated competence and diligence to resolve problem as well as explain the process and recommendations for future maintenance.

Excellent Rating

(39)

Rating Summary
34
5
0
0
0
34
5
0
0
0
Number of Suzuki Aerio services completed
429+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

P0341 OBD-II Trouble Code: Camshaft Position Sensor Circuit Range/Performance
P0341 code definition Camshaft Position Sensor Circuit Range/Performance What the P0341 code means P0341 is an OBD-II generic code that says the...
P0319 OBD-II Trouble Code: Rough Road Sensor B Signal Circuit
P0319 means the vehicle's crankshaft position changed due to defective, disconnected, or missing rough road sensors.
P0036 OBD-II Trouble Code: Heater Oxygen Sensor Control (HO2S) Circuit (Bank 1, Sensor 2)
P0036 Trouble Code definition P0036 is the code for Heater Oxygen Sensor Control (HO2S) Circuit (Bank 1, Sensor 2) What the P0036...

When on short local runs around town the car does not want to restart! I take a 10 min drive on highway and it starts normal

Hi there, thanks for writing in. You may be having a problem with the purge control valve leaking fumes into the engine when you shut off the car. The fumes will flood the engine and cause hard starts or no...

How long does it take to change rear end on 2003 ford f150

The time depends on whether you are dropping in a pre-assembled (re-built or used) axle/differential or are talking about re-building what you have. To just remove and re-install the entire assembly would require roughly 7 to 11 hours depending on...

Sound coming from front wheel when driving / steering wheel vibration

Hello, thank you for writing in. When dealing with these types of situations, start with the simplest possibilities, and work your way up in complexity. Start by having the tires balanced. Make sure you have not lost a wheel weight,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com