Subaru Legacy Engine is sputtering Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(343)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(343)

Engine is sputtering Inspection Service

How much does a Engine is sputtering Inspection cost?

On average, the cost for a Subaru Legacy Engine is sputtering Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Subaru LegacyH4-2.5LService typeEngine is sputtering InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2013 Subaru LegacyH6-3.6LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Subaru LegacyH4-2.5LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2001 Subaru LegacyH4-2.5LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1998 Subaru LegacyH4-2.5LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2011 Subaru LegacyH6-3.6LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Subaru LegacyH4-2.5LService typeEngine is sputtering InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2002 Subaru LegacyH4-2.5LService typeEngine is sputtering InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Subaru Legacy Engine is sputtering Inspection prices

In almost all cases, a sputtering engine is trying to tell you that there is a deeper problem that requires immediate attention. An engine running out of gas will definitely sputter but if the gas gauge indicates full, the problem lies deeper inside the engine compartment.

An incomplete combustion in the engine will cause a sputter as can the ignition system. The fuel system, such as a blocked fuel injector may also cause the vehicle to sputter. While a sputtering engine may not seem like a major issue, it is a symptom of a bigger problem that will not self-correct and will eventually result in a much more expensive repair. The source of the sputter should be investigated and repaired as soon as possible.

How this system works:

A sputtering engine can have its root cause located in a number of different systems. Here are two of the more common ones, the exhaust and fuel system.

The exhaust system collects exhaust gases from the cylinder head via the exhaust manifold, which acts as a funnel diverting exhaust gases away from the cylinders. The gases are then released through the front pipe where they travel to the catalytic converter. The catalytic converter removes the harmful elements of the gases such as carbon monoxide and hydrogen monoxide, converting them into inert gases.

The gases exit the catalytic converter into the muffler, which reduces the noise levels of the engine, and finally the exhaust fumes exit the vehicle at the tail pipe.

The fuel system is responsible for storing and supplying fuel to the car to drive the engine. Fuel is mixed with air, atomized and vaporized. This happens in the engine intake system. This mixture is then compressed in the engine cylinder and then ignited which produces the energy which moves the pistons.

Common reasons for this to happen:

  • Leak in Exhaust Manifold: A leak in the exhaust manifold, which collects exhaust gases, can cause the engine to sputter or run unevenly. This condition can also cause the Check Engine light to trigger as well as present increased engine noise and poor performance from the engine. A cracked or leaking exhaust manifold can create dangerous driving condition as the escaping hot gases can melt nearby plastic components. It can also lead to exhaust fumes making their way into the car cabin.

  • Worn Seals or Gaskets: There are a number of gaskets and seals in the exhaust system and if any of them are failing it can create a rough or sputtering engine. Gaskets and seals wear down over time and will eventually have to be replaced. Failing to do this in a timely manner can damage the exhaust manifold which is a much more expensive repair.

  • Failing Catalytic Converter: If the engine is sputtering, running rough and has a smell of rotten eggs it is probably due to a failing catalytic converter. In most cases, the Check Engine light will trigger as well. When a converter starts to fail, it isn’t able to burn off the hydrocarbons in the exhaust, and is no longer breaking down the sulfur created by the engine. This leads to the strong rotten egg smell. Eventually the car will not start at all as the catalytic converter becomes totally blocked.

  • Malfunctioning Oxygen Sensors: Oxygen sensors measure how rich or lean the exhaust gases are when they leave the vehicles combustion chamber. The vehicle computer uses this information to adjust the amount of fuel entering the engine. A dirty or failing sensor puts too much or too little fuel into the engine causing it to run rough or sputter. Oxygen sensors must be replaced on a regular basis.

  • Dirty Fuel Injectors: Fuel injectors spray fuel into the cylinders. It is then mixed with air and ignited. Fuel injector nozzles can become clogged over time, which can lead to a sputtering engine, slow acceleration and the car not having enough power. Fuel injectors can be cleaned if the problem is caught early, but as the conditions worsens, the injectors may have to be replaced.

  • Bad or Dirty Spark Plugs: Spark plugs are responsible for igniting the fuel in the combustion chamber. If they are not working correctly or are dirty they don’t ignite the fuel cleanly and the car can misfire or sputter. The plugs will need to be replaced or cleaned.

  • Dirty Mass Airflow Sensor: The mass airflow sensor measures the amount of air that is entering the fuel injection system. It sends that information to the vehicle computer, which then delivers the proper amount of fuel to the combustion chamber. A dirty mass airflow sensor will send the wrong information the computer resulting in a rough running or sputtering engine.

  • Vacuum Leak: A leak in the vacuum system can lead to a sputtering or rough running engine. As the problem progresses the vehicle can hesitate or stall when accelerating.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the engine is sputtering issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

A mechanic will inspect your car's exhaust system and other important components of your vehicle. This includes the exhaust manifold, exhaust seals and gaskets, oxygen sensors, airflow sensors and more. It may be necessary for the mechanic to crank up your car to diagnose your engine's sputtering.

How important is this service?

In almost all cases, a sputter engine is a symptom of a more serious issue lurking below the surface. If the problem is not diagnosed and repaired in a timely manner the vehicle will likely start to stall, become hard to start and eventually stop running altogether.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(343)

Rating Summary
326
11
1
2
3
326
11
1
2
3

Adam

17 years of experience
48 reviews
Adam
17 years of experience
Subaru Legacy H4-2.2L - Brake Pads Replacement (Rear) - Menlo Park, California
Adam was on time, professional and very friendly. Beyond that - he did a great job and was extremely helpful - can't say enough good things about him. Thank you, Adam! If you have him as your mechanic - consider yourself lucky!

Danny

11 years of experience
269 reviews
Danny
11 years of experience
Subaru Legacy H4-2.5L Turbo - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Wynnewood, Pennsylvania
Danny came to replace an axle and front differential oil seal. He was very professional and performed the repair in a timely fashion. He test drove the car afterwards to verify his work. I am very satisfied with this service.

Eliseo

12 years of experience
239 reviews
Eliseo
12 years of experience
Subaru Legacy H4-2.5L - Headlight Bulb Replacement (Driver Side Low Beam) - Spring, Texas
Great

John

36 years of experience
434 reviews
John
36 years of experience
Subaru Legacy H4-2.2L - Brake Pads Replacement (Front) - San Bruno, California
Friendly, fast, efficient, professional and very competent. Respected the premises and left everything completely clean. SOLID all the way. Best Mobile Mechanic experience yet.

Excellent Rating

(343)

Rating Summary
326
11
1
2
3
326
11
1
2
3
Number of Subaru Legacy services completed
3773+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
700+
experts on our platform

Recent articles & questions

P0705 OBD-II Trouble Code: Transmission Range Sensor Circuit Malfunction (PRNDL Input)
P0705 code definition Transmission Range Sensor Circuit Malfunction (PRNDL Input) What the P0705 code means Diagnostic trouble code P0705 indicates that the...
How to Buy a Car Using Your Home Equity Line of Credit (HELOC)
Buying a new or used car often means that you must find financing (https://www.yourmechanic.com/article/5-essential-things-to-know-about-car-loans). Most often this is either through the dealership, a bank, or an online lender. While most lenders charge a high interest rate when taking out a...
P0746 OBD-II Trouble Code: Pressure Control Solenoid Performance or Stuck Off
P0746 code means the PCM has detected an irregularity in the electronic pressure control solenoid circuit often due too blockages or low fuel levels.

Check Engine light is on, replaced camshaft position sensor twice, light still on 2010 Dodge Ram 1500

Hello - I don't wish to insult anyone, but there are 2 camshaft position sensors on that engine. Any chance the same sensor was replaced twice? That would certain cause the scenario you describe. If both sensors have now been...

My truck says code p0700 but my code reader says p0720 which one do I go by? Also can the tcm screw with the output speed sensor?

Hello, thank you for writing in. The P0700 is a generic code telling you there are issues with the transmission control module. This can mean issues with the module itself, or any of the various sensors that are connected to...

How do I find the ignition switch

I would need to know the model of your 2002 BMW to know where the ignition switch is on your vehicle. If the vehicle has a key start on steering column then the switch is on other side of column...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com