Subaru Baja Clutch Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Clutch Switch Replacement Service

How much does a Clutch Switch Replacement cost?

On average, the cost for a Subaru Baja Clutch Switch Replacement is $239 with $144 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Subaru BajaH4-2.5LService typeClutch Switch ReplacementEstimate$402.83Shop/Dealer Price$484.79 - $708.17
2006 Subaru BajaH4-2.5L TurboService typeClutch Switch ReplacementEstimate$382.83Shop/Dealer Price$464.81 - $688.20
2005 Subaru BajaH4-2.5L TurboService typeClutch Switch ReplacementEstimate$382.83Shop/Dealer Price$464.81 - $688.20
2004 Subaru BajaH4-2.5LService typeClutch Switch ReplacementEstimate$382.83Shop/Dealer Price$464.79 - $688.16
2003 Subaru BajaH4-2.5LService typeClutch Switch ReplacementEstimate$382.83Shop/Dealer Price$464.82 - $688.23
2004 Subaru BajaH4-2.5L TurboService typeClutch Switch ReplacementEstimate$382.83Shop/Dealer Price$464.81 - $688.20
2006 Subaru BajaH4-2.5LService typeClutch Switch ReplacementEstimate$387.83Shop/Dealer Price$469.67 - $692.96
Show example Subaru Baja Clutch Switch Replacement prices

What is the Clutch Switch all about?

A number of new features makes manual transmission cars easier to drive on an everyday basis, including the clutch switch. This simple device is a safety feature, designed to prevent the engine from starting while the transmission is in gear. That doesn’t mean you have to put the transmission in neutral to start the car, though. The switch prevents the starter from actuating unless the clutch pedal is pressed to the floor. It mounts to the back of the clutch pedal assembly, and is really nothing more than a clutch-specific on/off switch. When the pedal is free, the switch is off. When you press it to the floor, the switch activates, turning the system on and allowing the engine to crank.

Keep in mind:

  • Like your brake light switch and other electronic components that see regular use, the clutch switch will wear out over time and require replacement.
  • Because it’s an electronic component, there is no visible wear and tear that would indicate a problem.

How it's done:

  • The under dash panels by the clutch pedal are removed
  • The defective clutch switch is disconnected and removed from the clutch pedal support
  • The new clutch switch is installed and adjusted
  • The electrical connector is connected to the new switch and the panels are re-installed
  • The vehicle is started to check the clutch switch for proper operation

Our recommendation:

If you’re experiencing problems that seem consistent with intermittent switch failure (the car sometimes won’t crank with the pedal depressed fully), have it diagnosed by one of our expert mechanics.

What common symptoms indicate you may need to replace the Clutch Switch?

  • Engine won’t start even with the clutch pedal depressed fully
  • Intermittent “no start” with the pedal depressed
  • The car will start without the clutch pedal pressed in

How important is this service?

While your clutch switch is a relatively simple part, your car won’t operate until a new one is installed in place of the broken one. However, switch failure will not prevent you from driving the car if it has already started – it only prevents the engine from cranking. Have your car diagnosed as soon as possible to prevent any inconvenience.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(17)

Rating Summary
16
0
0
1
0
16
0
0
1
0

Jose

17 years of experience
433 reviews
Jose
17 years of experience
Subaru Baja H4-2.5L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Beaverton, Oregon
Showed up on time and did a good job.

Chet

41 years of experience
493 reviews
Chet
41 years of experience
Subaru Baja H4-2.5L - Tie Rod End Replacement (Front Right Inner) - San Diego, California
Chet was great, as always!

Chet

41 years of experience
493 reviews
Chet
41 years of experience
Subaru Baja H4-2.5L - Evaporation Vent Solenoid - San Diego, California
Chet was great, as usual. He always gives us exactly what we need, advises on future needs and doesn't try to sell us unnecessary service.

Mike

26 years of experience
150 reviews
Mike
26 years of experience
Subaru Baja H4-2.5L - Car is not starting - Ann Arbor, Michigan
Very friendly, helpful, timely & knowledgable.

Excellent Rating

(17)

Rating Summary
16
0
0
1
0
16
0
0
1
0
Number of Subaru Baja services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
700+
experts on our platform

Recent articles & questions

How Long Does a Shift Interlock Solenoid Last?
Modern Modern transmissions are much more advanced than they were only a few decades ago, particularly automatic transmission. There are many new features and designs on the market, ranging from ‘slick’ shifting transmissions to manual shift paddles on the steering...
P0006 OBD-II Trouble Code: Fuel Shutoff Valve "A" Control Low
P0006 P0006 code definition The P0006 code is associated with an electrical circuit which connects from your engine computer to your fuel system and is most commonly found on diesel engines. It also may be related to other codes, such...
P2572 OBD-II Trouble Code: Direct Ozone Reduction Catalyst Deterioration Sensor Circuit 4
What What the P2572 code means? P2572 is an OBD-II generic code for the engine control module (ECM) detecting the ozone reduction catalyst has deteriorated or the sensor has failed. Some problems may be from a defective regeneration system on...

What Sensors Make the ABS Work?

When we are discussing ABS systems it is good to note the year and make of your vehicle because ABS systems have evolved quite a bit over the years, but you also have to know how the ABS system works....

I have a 2010 Nissan Maxima. My car has 98,000 miles on it. I haven't had a tune up yet. I can be driving and when I go to acceler

Claimed by Jeff Engstrom

Hi, I had my thermostat and water pump replaced and the car is still overheating

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com