Saturn Relay Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(14)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(14)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a Saturn Relay Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Saturn RelayV6-3.9LService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2006 Saturn RelayV6-3.5LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 Saturn RelayV6-3.9LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2005 Saturn RelayV6-3.5LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Saturn Relay Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(14)

Rating Summary
13
0
0
0
1
13
0
0
0
1

Jay

37 years of experience
948 reviews
Jay
37 years of experience
Saturn Relay V6-3.9L - Car is making a noise - Redlands, California
Jay was very professional, prompt and thorough. Tons of experience and able to explain in laymans terms what was going on.

Richard

21 years of experience
237 reviews
Richard
21 years of experience
Saturn Relay V6-3.5L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Fort Myers Beach, Florida
On time . Nice guy. Did great job. Knew what he was talking about . Would use you again .

Abdul

11 years of experience
419 reviews
Abdul
11 years of experience
Saturn Relay V6-3.5L - Thermostat - Tucker, Georgia
He is an excellent mechanic and very professional, timely, courteous to work with. This was my second time working with him and he is wonderful to work with :-)

Nathan

29 years of experience
260 reviews
Nathan
29 years of experience
Saturn Relay V6-3.5L - Brake Pads Replacement (Rear) - Broken Arrow, Oklahoma
Great experience. Would definitely recommend.

Excellent Rating

(14)

Rating Summary
13
0
0
0
1
13
0
0
0
1
Number of Saturn Relay services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

What Is Dry Gas?
Dry Dry gas is a very helpful fuel additive that is used to remove water from gasoline and prevent water-contaminated gasoline from freezing. While the solution itself is actually called dry gas, there is one brand of this fluid named...
Symptoms of a Bad or Failing EGR Vacuum Modulator
Common signs include engine performance issues, the Check Engine Light coming on, and failing an emissions test.
How to Read a New Car Window Sticker
If you’ve ever been to at auto dealership (https://www.yourmechanic.com/article/how-to-negotiate-a-better-deal-at-the-car-dealership-by-jason-unrau), then you’ve seen a new car window sticker. A new car window sticker exists for all new cars, and gives potential buyers all the information they need about the specific car...

sluggish not much power

A clogged catalytic converter can increase exhaust system pressure robbing the engine of power. Along with this overheating, excessive fuel consumption can also occur. The exhaust system pressure should be checked and compared to specification to ensure the catalytic converter...

increased engine over load message.

Hi there. The message is coming on for the catalytic converter overheating. A misfire or leaking injector will cause the catalytic converter to overheat as raw fuel enters the exhaust system. Check the engine for a misfire and see which...

Lower control arm assembly comes with ball joint for a lexus nx2oot

The OEM (dealer) parts are sold separately, that is you have to buy the ball joint and the control arm individually, if you desire both parts. In the aftermarket, you can buy a complete assembly, that is a control arm...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com