Saturn LS2 Parking brake is stuck Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(13)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(13)

Parking brake is stuck Inspection Service

How much does a Parking brake is stuck Inspection cost?

On average, the cost for a Saturn LS2 Parking brake is stuck Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LS2V6-3.0LService typeParking brake is stuck InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Saturn LS2 Parking brake is stuck Inspection prices

Your parking brake is a valuable component that helps ensure better safety when parked on an incline, and also helps reduce unnecessary loading of the transmission. If you’ve ever parked on a hill and not used the parking brake, you’re familiar with the loud “thunk” and lurch that happens when you crank the car and put it in drive when you’re ready to leave. Engaging the parking brake avoids this, and enhances safety. However, if your parking brake is stuck, the light in your dash will stay on, and you may damage the brake shoes while driving.

How this system works:

Your parking brake is actually very little more than a lever attached to a cable. When you pull the parking brake handle in the cabin, it engages a cable. That cable runs from the parking brake handle under the car and to the back wheels. Pulling up on the handle pulls the cable taut, which engages the parking brake.

The brake itself is nothing more than a pair of small brake shoes mounted inside the drum built into the rear rotors of your car. The shoes press outward on the drum, holding the wheel in place (it’s not as strong as your normal brakes, and generally cannot hold the car by itself on anything more than a very gentle incline).

When you put the parking brake handle down, the cable disengages the parking brake and the shoes retract from against the walls of the drum. This releases the vehicle, allowing you to drive without damaging the parking brake.

Common reasons for this to happen:

  • Rust and Corrosion: One of the most common problems with parking brakes is corrosion on the cable that leads to the rear brakes. Once the cable begins to rust, it can stick. When this happens, you won’t be able to release the parking brake.

  • Engaged Too Hard: While uncommon, it is possible for the parking brake to stick if you applied it to hard. If you crank back on the handle as hard as possible, you’re overdoing it, and it’s possible for the cable to stretch, the shoes to stick and more.

  • Damaged/Stuck Adjuster Screw: The rear brake shoes are operated by an adjuster screw. If the screw is stuck, corroded or damaged, it will not move and your parking brake will not disengage.

  • Leaving It Engaged for Too Long: Most of us use our parking brake on a relatively limited basis, leaving it engaged overnight at the longest. In some situations, leaving it engaged for a long period (say over the winter in storage) can cause the assembly to freeze and stick.

What to expect:

Our professional mobile mechanic will come to your home or office to inspect the parking brake handle, cable, lever, adjusting screw, shoes and other components in the system. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of the parking brake, from the handle to the cable, all the way back to the lever, the spring, the adjusting screw and the shoes. It may be necessary to remove one or both rear wheels. It may also be necessary to disassemble the rear brakes to reach the parking brake components.

How important is this service?

If your parking brake is stuck, you cannot drive the car without causing further damage. It’s highly advised to leave your car parked where it is if you notice that the Parking Brake light stays on after lowering the handle, or feeling resistance when trying to drive (or smelling burned brake material after driving). One of our professional mechanics will be able to diagnose the problem and restore functionality to your parking brake.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(13)

Rating Summary
10
3
0
0
0
10
3
0
0
0

David

14 years of experience
103 reviews
David
14 years of experience
Saturn LS2 V6-3.0L - Engine or Transmission Mount Replacement - Austin, Texas
David Vazquez is a Total Professional and would be welcomed at any dealership or Pit Row at the Indy 500. Strictly a 5Star mechanic.

Melvin

17 years of experience
221 reviews
Melvin
17 years of experience
Saturn LS2 V6-3.0L - oil filter housing - Atlanta, Georgia
I LIKE THE YOUR MECHANIC SERVICE IN THAT I DID NOT HAVE TO WASTE AN ENTIRE DAY AT A REPEAIR SHOP; HIGHLY LIKELY TO USE AGAIN FOR REPAIRS TO MY OTHER VEHICLES. MY MECHANIC WAS ON TIME AND QUITE PROFESSIONAL.

Pete

16 years of experience
192 reviews
Pete
16 years of experience
Saturn LS2 V6-3.0L - Oil Change - El Cajon, California
As always on time professional and very knowledgeable and polite. Highly recommend.

Michael

22 years of experience
77 reviews
Michael
22 years of experience
Saturn LS2 V6-3.0L - Heating AC - Wesley Chapel, Florida
Mike did a great job when servicing my daughters car. He has the knowledge, tools and customer friendly drive that is missing today. I would recommend Mike to all customers in the area.

Excellent Rating

(13)

Rating Summary
10
3
0
0
0
10
3
0
0
0
Number of Saturn LS2 services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

P0181 OBD-II Trouble Code: Fuel Temperature Sensor 'A' Circuit Range/Performance
P0181 P0181 code definition Fuel Temperature Sensor ‘A’ Circuit Range/Performance What the P0181 code means P0181 is a generic OBD-II code that is triggered when the fuel temperature sensor ‘A’ circuit goes out of specifications during self-testing. This indicates that...
Insurance Requirements for Car Registration in New Jersey
All All registered vehicles in New Jersey are required to be covered by three types of liability insurance, or “financial responsibility.” The minimum financial responsibility requirements for New Jersey drivers are as follows: A minimum of $5,000 for liability insurance,...
P0784 OBD-II Trouble Code: 4-5 Shift Malfunction
P0784 means that a malfunction in the 4-5 shift function was detected due to a faulty PCM, TCM or solenoid, low or dirty fluid.

What precautions should I follow with the cruise control system?

While your car’s cruise control system isn’t designed to require maintenance, there are several things that you should know about its operation and your safety. Here are the most important If a malfunction happens when cruise control is engaged, it...

P0421 and P0401 codes have appeared

Hello. The codes P0421 (https://www.yourmechanic.com/article/p0421-obd-ii-trouble-code-warm-up-catalyst-efficiency-below-threshold-bank-1-by-andrew-quinn) and P0401 (https://www.yourmechanic.com/article/p0401-obd-ii-trouble-code-exhaust-gas-recirculation-flow-malfunction-by-jay-safford) refer to the oxygen sensor (https://www.yourmechanic.com/services/oxygen-sensor-replacement) and EGR valve (https://www.yourmechanic.com/services/exhaust-gas-recirculation-egr-valve-replacement), respectively. It is possible that an issue with one is causing the fault to be seen by the other, as they will...

I sucked a rag into my intake, how do I clean it out without pulling the whole motor apart?

Hey there. The rag may only get as far as the intake valve and not get past it yet until the valve chews it up. You should remove the carburetor and using long mechanical fingers small enough to reach into...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com