Saturn LS1 Pitman Arm Shaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Pitman Arm Shaft Seal Replacement Service

How much does a Pitman Arm Shaft Seal Replacement cost?

On average, the cost for a Saturn LS1 Pitman Arm Shaft Seal Replacement is $145 with $22 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LS1L4-2.2LService typePitman Arm Shaft Seal ReplacementEstimate$192.53Shop/Dealer Price$216.29 - $258.32
Show example Saturn LS1 Pitman Arm Shaft Seal Replacement prices

What is the Pitman Arm Shaft Seal all about?

In order to transmit direction from the steering wheel to the vehicle’s wheels and tires, a complex network of interconnected components is used. The steering wheel connects to two different steering shafts, which connect to the gearbox. The pitman arm connects to the other side of the gearbox, and is responsible for helping to move the wheel in the desired direction.

The pitman arm shaft seal essentially serves the same purpose as the steering shaft seal – it prevents power steering fluid from exiting the gearbox. It is protected by a dust cover, which helps to ensure that dirt and dust don’t compromise the interior seal. Both are held in place by snap rings.

Replacing a pitman arm shaft seal is a little simpler than replacing a steering shaft input seal, and it can be done without removing the gearbox. With that being said, the pitman arm does need to be disconnected and moved out of the way, and there is a significant amount of teardown needed. Have one of our expert mechanics replace the pitman arm shaft seal if required.

Keep in mind:

  • The pitman arm shaft seal should be inspected during normal suspension repairs and wheel alignments.
  • The seal can be inspected if a problem is noticed – a visual inspection from under the vehicle is possible if car is placed on a lift.
  • Like all other seals on your vehicle, pitman arm shaft seals will eventually need to be replaced due to wear and tear.

How it's done:

  • The vehicle's front wheels are put straight and the vehicle is lifted and supported on jack stands
  • The defective steering pitman arm shaft seal is removed
  • The new steering pitman arm shaft seal is installed
  • The vehicle is removed from jack stands
  • The vehicle is started and checked for steering operation

Our recommendation:

Without a reliable pitman arm shaft seal, dirt and dust can enter the gearbox, and power steering fluid can leak out. Power steering fluid is both corrosive and flammable, and low fluid levels can damage your steering system. If you suspect you have a leaking seal, we recommend having it diagnosed by one of our expert mechanics.

What common symptoms indicate you may need to replace the Pitman Arm Shaft Seal?

  • Low power steering fluid in the reservoir (indicative of a leak at some point in the system)
  • Power steering fluid on the ground behind one of the front tires

How important is this service?

Having your pitman arm shaft seal replaced is important for maintaining the health and functionality of your system overall. If you have noticed low fluid, or fluid leaks on the ground below the pitman arm, we recommend having one of our expert mechanics diagnose the issue and then repair the system.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(11)

Rating Summary
10
0
0
0
1
10
0
0
0
1

Richard

13 years of experience
601 reviews
Richard
13 years of experience
Saturn LS1 L4-2.2L - Brake Pads Replacement (Rear) - Henderson, Nevada
Richard was timely, very professional, and very knowledgeable. Job well done! 

Jesus

16 years of experience
68 reviews
Jesus
16 years of experience
Saturn LS1 L4-2.2L - Inspection / Diagnostics - Torrance, California
Fantastic service, and Jay was great at explaining the details and showing me what the problem was. Highly recommend him, and this service in general! Very helpful and in my case, needed because I couldn't drive my car.

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Saturn LS1 L4-2.2L - AC Air Filter - Oakland, California
josh was great

John

27 years of experience
1033 reviews
John
27 years of experience
Saturn LS1 L4-2.2L - Car is not starting - Pasadena, Texas
Great mechanic and very honest! I love to deal with people like him who will tell you exactly what's wrong, are efficient and do right by their clients.

Excellent Rating

(11)

Rating Summary
10
0
0
0
1
10
0
0
0
1
Number of Saturn LS1 services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Power Brake Booster
When When you apply your brakes, you’ll feel a pressure – and that feeling is the brake booster doing its job. If you’re not feeling that extra little bit of pressure when you apply your brakes, it’s a good bet...
Symptoms of a Bad or Failing Air Pump
Common signs include the engine running rough, reduced horsepower, and the Check Engine Light going on.
How Long Does an Electronic Spark Control Last?
The The job of the electronic spark control is to control the engine timing. This part can also be called the "knock sensor", as it monitors any unusual knocking, or vibration that may be happening in the engine. This is...

Is It Worth It to Buy My Own Scanner or Code Reader?

A code scanner is used to access the onboard diagnostic system (OBD) of your vehicle. Not all code scanners are created equal; there are many different scanner types. The most inexpensive scanners on the market today hookup to the OBD...

P1810 Pressure Manifold Fault

If you have code P1810, then this might be something wrong with the transmission control valve for the gear position sensor, or a compatibility problem between the different computers. Have a pinpoint test for the code (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) done and see...

When I accelerate, my car hesitates, the rpms bounce, and sometimes i have a missfire flashing CEL

Hello and thank you for your question. With having your engine with bank 1 being lean (lack of fuel), the symptoms are showing that there is a problem with fuel delivery or excessive heat. If the EGR valve was to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com