Saturn LS Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Saturn LS Intake Manifold Gaskets Replacement is $265 with $111 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LSL4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$393.42Shop/Dealer Price$453.11 - $623.27
Show example Saturn LS Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(5)

Rating Summary
4
0
0
0
1
4
0
0
0
1

Richard

12 years of experience
450 reviews
Richard
12 years of experience
Saturn LS L4-2.2L - Coolant is leaking - Odenton, Maryland
Great Service! He was knowledgeable about what my issue was and provided me with the help that I needed.

Oscar

25 years of experience
72 reviews
Oscar
25 years of experience
Saturn LS L4-2.2L - Car is not starting - Odenton, Maryland
Oscar was very professional and knowledgeable about cars. He let me know exactly what was wrong with my car. I had been told my fuel pump was bad which is why my car wouldn't start. Well turns out that wasn't the case at all. Oscar found that it was a broken timing chain was the reason for my car not starting. I'm glad I found that out before shelling out unnecessary money on something that wasn't broken at all. All in all Great service across the board and I would highly recommend Oscar for any auto needs.

Ross

19 years of experience
54 reviews
Ross
19 years of experience
Saturn Vue V6-3.0L - Intake Manifold Gaskets - Santa Rosa, California
Astute, found oil issue and recommended valve cover gasket replacement as well,,,good catch Ross!

Patrick

33 years of experience
369 reviews
Patrick
33 years of experience
Saturn SL2 L4-1.9L - Intake Manifold Gaskets - Las Vegas, Nevada
Patrick was hands down the best car repair experience I've ever had. He is honest, direct and very communicative through the whole process. I had to reschedule several time due to delays in receiving a part and he was very understanding and helpful in arranging a time/day that worked for both. During the repair he was always explaining and answering questions, allowing me to understand what the problem was and how certain things worked. Even though I hope there are no new major problems that arise, I still have a few minor things to fix and rest assured I will be booking them with Patrick. Sincere thanks Pat!

Excellent Rating

(5)

Rating Summary
4
0
0
0
1
4
0
0
0
1
Number of Saturn Intake Manifold Gaskets Replacement services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

What Is the Difference Between Sprung Weight and Unsprung Weight?
Car Car aficionados, particularly those involved with racing, sometimes talk about “sprung” and “unsprung” weight (or mass). What do these terms mean? The spring is the suspension component that holds the vehicle up and cushions it and its occupants and...
10 Best Stores to Buy Auto Parts in Baltimore, Maryland
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Baltimore is Advance Auto Parts.
Symptoms of a Bad or Failing Windshield Washer Reservoir
Common signs include fluid leaks from below the car, washer fluid not spraying or frequently low, and cracks in the tank.

How do I use the remote start?

If the vehicle is equipped with the remote start option, then the keyless entry system remote will have 4 buttons. The button at the top will have a curved arrow on it. Press the “lock” button before pressing the remote...

Anti-theft system keeping car from starting

It sounds like the ignition key or the door lock switches are not working correctly. Try and unlock the vehicle from the passenger side and see if the alarm disables. If it does, then the drivers door lock cylinder is...

I drive a 98 lexus gs 300 and it recently failed smog check bc the no levels are too high. How much would something like cost to repair

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com