Saturn LS Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Saturn LS Fuel Injector Replacement is $803 with $663 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LSL4-2.2LService typeFuel Injector ReplacementEstimate$1481.60Shop/Dealer Price$1816.85 - $2814.50
Show example Saturn LS Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(2)

Rating Summary
2
0
0
0
0
2
0
0
0
0

Richard

12 years of experience
450 reviews
Richard
12 years of experience
Saturn LS L4-2.2L - Coolant is leaking - Odenton, Maryland
Great Service! He was knowledgeable about what my issue was and provided me with the help that I needed.

Oscar

25 years of experience
72 reviews
Oscar
25 years of experience
Saturn LS L4-2.2L - Car is not starting - Odenton, Maryland
Oscar was very professional and knowledgeable about cars. He let me know exactly what was wrong with my car. I had been told my fuel pump was bad which is why my car wouldn't start. Well turns out that wasn't the case at all. Oscar found that it was a broken timing chain was the reason for my car not starting. I'm glad I found that out before shelling out unnecessary money on something that wasn't broken at all. All in all Great service across the board and I would highly recommend Oscar for any auto needs.

Joe

24 years of experience
85 reviews
Joe
24 years of experience
Saturn Outlook V6-3.6L - Fuel Injector - Southlake, Texas
Very professional and determined to solve the problem.

Travis

16 years of experience
165 reviews
Travis
16 years of experience
Saturn Vue V6-3.6L - Fuel Injector - Mesquite, Texas
He definitely helped me out.

Excellent Rating

(2)

Rating Summary
2
0
0
0
0
2
0
0
0
0
Number of Saturn Fuel Injector Replacement services completed
22+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

How to Replace a Fuel Gauge Sender
The fuel gauge has a sender that goes bad when it says that the fuel level is different lower or higher than it actually is.
How to Buy a Personalized License Plate in New Mexico
A A personalized license plate (https://www.yourmechanic.com/article/how-to-find-out-which-license-plates-are-available-in-your-state-by-brady-klopfer) is one of the best and easiest ways to customize your vehicle. With a personalized license plate, you can add a little bit of your own personal style and flair to your car -...
A Buyer’s Guide to the 2012 Jeep Patriot
Those Those who love getting off road will often turn to a Jeep. The 2012 Patriot could be a good choice for those who want a quality vehicle for the roads, and when they decide to venture off the beaten...

Radiator hose pops off

The cooling system would need to be opened to see if, when the engine is cranked, the combustion of the engine is pressurizing the cooling system, and blowing off the hose. The head gasket may be blown. I recommend having...

Car isn't shifting when pedal is all the way down and is slow.

Your engine management system is going into "limp mode" when the Check Engine light is illuminated, reducing engine power, and quite likely, leaving your automatic transmission in 2nd gear. This is why you are experiencing greatly diminished performance. Turning your...

I got code P0106 this morning with no symptoms, can I drive to JACKSONVILLE without an issue?

It would be very difficult to determine if the vehicle would be able to drive that many miles without determining what exactly is causing the trouble code. I would recommend having your vehicle inspected by a qualified professional to determine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com