Saturn L300 Car Thermostat Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Saturn L300 Car Thermostat Replacement is $292 with $96 for parts and $196 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2001 Saturn L300V6-3.0L	Service typeCar Thermostat Replacement	Estimate$916.18	Shop/Dealer Price$1011.66 - $1267.30
2004 Saturn L300L4-2.2L	Service typeCar Thermostat Replacement	Estimate$396.91	Shop/Dealer Price$447.60 - $593.92
2004 Saturn L300V6-3.0L	Service typeCar Thermostat Replacement	Estimate$778.72	Shop/Dealer Price$841.78 - $1015.05
2002 Saturn L300V6-3.0L	Service typeCar Thermostat Replacement	Estimate$881.94	Shop/Dealer Price$970.80 - $1221.48
2003 Saturn L300V6-3.0L	Service typeCar Thermostat Replacement	Estimate$881.94	Shop/Dealer Price$976.40 - $1231.27
2005 Saturn L300V6-3.0L	Service typeCar Thermostat Replacement	Estimate$881.94	Shop/Dealer Price$971.33 - $1222.41

Show example Saturn L300 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(40)

Rating Summary

39

0

0

0

1

39

0

0

0

1

SEE REVIEWS NEAR ME

Jonathan

30 years of experience

503 reviews

Request Jonathan

Jonathan

30 years of experience

Request Jonathan

by William Morris

L300 2003 - Car starts and then dies - Hudson, FL

Excelent !.....

Josh

14 years of experience

69 reviews

Josh

14 years of experience

by Kathy Buck

L300 2003 - Exhaust fume odor in car - Naples, FL

Josh told me exactly what was wrong with my car and the repair was done quickly and even got something better to fix my problem. I am satisfied with his work.

Jeremy

15 years of experience

482 reviews

Jeremy

15 years of experience

by Randy Rusk

L300 2005 - Brake Light Bulb - Lake Worth, FL

Great experience. Could not have been any more pleased. Professional in all aspects.

Chet

35 years of experience

613 reviews

Chet

35 years of experience

by Christopher Foster

L300 2004 - Heating AC - San Diego, CA

He's a TOTAL PRO. First time working with him and this company, and he's the reason I'll come back for more. Straight-up, straight-forward, easy, flexible, and thorough. Fixed the problem right up, and even though we had to leave, he locked it all up, set everything right. Will recommend him to anyone. First-Rate and Five + Stars.

Excellent Rating

(40)

Rating Summary

39

0

0

0

1

39

0

0

0

1

SEE REVIEWS NEAR ME

Recent articles & questions

How to Dispose of Car Batteries

Car batteries have chemicals which can damage the environment. Dispose of car batteries at a battery recycling center or a local auto supply store.

Is it Safe to Drive With a Punctured Tire?

A A punctured tire turns into a flat tire very quickly, especially while driving down the road. Since there is nothing holding the air in the tire, it leaks out causing a flat tire. It is not safe to drive...

P3425 OBD-II Trouble Code: Cylinder 4 Deactivation/Intake Valve Control Circuit/Open

P3425 means the PCM is not receiving the proper values from the MAP, MAF, and TP sensors to enter 4 cylinder mode due to low oil level or pressure.

wat is the cost to repair, engine oil pressure

Hello. This is a common problem on this engine. The most common cause is a problem with the seal on the oil pump pick up. The seal goes bad and allows the oil to aerate causing low pressure. It can...

Do I need a special tool to remove the knock sensor?

Hello. There does not appear to be any special tool required to remove the knock sensor on an 84 Corvette. Only the correct size socket should be needed in order to loosen and remove the sensor. The sensor is located...

There is a loud humming noise coming from under the car becomes louder when I let off the gas

A common cause of the type of noise you are describing is one or more failed wheel bearings. The exact wheel position can be determined using chassis ears (remote wireless microphones). Not to worry, as replacing wheel bearings on most...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com