Porsche 718 Cayman Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(87)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(87)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Porsche 718 Cayman Brake Pad Replacement is $233 with $93 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Porsche 718 CaymanH4-2.5L TurboService typeBrake Pads - Rear ReplacementEstimate$371.96Shop/Dealer Price$422.77 - $565.48
2020 Porsche 718 CaymanH4-2.0L TurboService typeBrake Pads - Rear ReplacementEstimate$436.15Shop/Dealer Price$503.59 - $700.96
2017 Porsche 718 CaymanH4-2.5L TurboService typeBrake Pads - Rear ReplacementEstimate$331.95Shop/Dealer Price$380.30 - $521.16
2021 Porsche 718 CaymanH4-2.5L TurboService typeBrake Pads - Rear ReplacementEstimate$436.15Shop/Dealer Price$503.62 - $701.01
2017 Porsche 718 CaymanH4-2.0L TurboService typeBrake Pads - Front ReplacementEstimate$331.95Shop/Dealer Price$381.77 - $523.74
2019 Porsche 718 CaymanH4-2.5L TurboService typeBrake Pads - Rear ReplacementEstimate$436.15Shop/Dealer Price$503.79 - $701.30
2020 Porsche 718 CaymanH4-2.0L TurboService typeBrake Pads - Front ReplacementEstimate$436.15Shop/Dealer Price$503.64 - $701.04
2020 Porsche 718 CaymanH4-2.5L TurboService typeBrake Pads - Front ReplacementEstimate$436.15Shop/Dealer Price$503.62 - $701.01
Show example Porsche 718 Cayman Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Porsche mechanics

Real customer reviews from Porsche owners like you.

Excellent Rating

(87)

Rating Summary
81
4
1
0
1
81
4
1
0
1

Luis

30 years of experience
119 reviews
Luis
30 years of experience
Porsche 718 Cayman H4-2.0L Turbo - Oil Change - Barrington, Illinois
We was extremely careful in protecting my car...and would ask for him in the future.

James

32 years of experience
705 reviews
James
32 years of experience
Porsche Panamera V8-4.8L Turbo - Brake Pads Replacement (Rear) - Irvine, California
James is really nice person. He knows a lot about the cars, and he teaches me many knowledge about car. His skill is also great.

Matthew

13 years of experience
183 reviews
Matthew
13 years of experience
Porsche Cayenne V8-4.8L - Brake Pads Replacement (Front) - Carmel, Indiana
Showed up on time. Performed requested service efficiently and timely. Professional and courteous; cleaned up after service. Very pleased with Matthew and Your Mechanic.

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
Porsche Boxster H6-2.7L - Brake Pads Replacement (Front) - Sunnyvale, California
Did a good brake pad and rotor replacement on my 2004 Boxster, very friendly and clear communication - not only did he call me with an estimated arrival time, you get a text that lets you track location while he's in transit. I think I was mentally expecting a guy in coveralls and a pickup and Pardeep pulled up very well dressed in a minivan, haha, but he had all the equipment he needed, floor jack and stands, impact wrench with compressor, and so on. We ended up not doing a full brake flush, so I called YourMechanic and they were great about removing it from the bill. I'd hire Pardeep again.

Excellent Rating

(87)

Rating Summary
81
4
1
0
1
81
4
1
0
1
Number of Porsche Brake Pad Replacement services completed
957+
services done by our mechanics
TOTAL NUMBER OF EXPERT Porsche MECHANICS
300+
experts on our platform

Recent articles & questions

How Does Traction Control Work?
Traction control is a car safety feature that prevents wheels from spinning on low-grip surfaces. Electric sensors in your car make the system work.
A Buyer’s Guide to the 2012 Nissan Altima Hybrid
The The Nissan Altima is already a favorite among mid-sized sedans, but it gained even more points with a lot of car buyers with the option to buy a 2012 Nissan Altima Hybrid. Though the four-cylinder Nissan Altima was already...
How to Make a Bad Car Look Great
As As a vehicle ages, it often loses some of its luster as the newness wears off and time takes its toll on the interior and exterior. The good news is that almost any car can be made to look...

Horn and cruise control not working.

Unfortunately, I don't have the wiring diagram for this vehicle handy. However, my guess is that the clockspring somehow got damaged. If your SRS (airbag) warning light is also on, this is even more of an indication the clockspring requires...

RPMs high while driving

The throttle control system is malfunctioning and would need to be tested for codes. The intake system should be checked for any vacuum leaks in the intake hoses. Once the Check Engine Light is tested the codes received will need...

I have a 2010 Buick Enclave cxl and the engine light when on a week ago on Monday I took it to auto zone and they gave me a code f

Most emission codes will not result in a no crank condition. Once the cause of the no crank/no start fault is repaired though, you should still request a check engine light diagnostic (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) so that the responding certified mechanic can...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com