logo

Pontiac Vibe Wheel Stud Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(3)

Wheel Stud Replacement Service

How much does a Wheel Stud Replacement cost?

On average, the cost for a Pontiac Vibe Wheel Stud Replacement is $212 with $117 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Pontiac VibeL4-1.8LService typeWheel Stud - Passenger Side Front ReplacementEstimate$382.09Shop/Dealer Price$458.87 - $666.69
2008 Pontiac VibeL4-1.8LService typeWheel Stud - Passenger Side Front ReplacementEstimate$329.79Shop/Dealer Price$398.51 - $582.12
2008 Pontiac VibeL4-1.8LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$329.79Shop/Dealer Price$398.51 - $582.12
2007 Pontiac VibeL4-1.8LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$329.79Shop/Dealer Price$398.49 - $582.08
2010 Pontiac VibeL4-2.4LService typeWheel Stud - Passenger Side Front ReplacementEstimate$362.09Shop/Dealer Price$438.90 - $646.75
2009 Pontiac VibeL4-1.8LService typeWheel Stud - Driver Side Rear ReplacementEstimate$362.09Shop/Dealer Price$438.88 - $646.72
2006 Pontiac VibeL4-1.8LService typeWheel Stud - Passenger Side Front ReplacementEstimate$334.79Shop/Dealer Price$403.37 - $586.88
2007 Pontiac VibeL4-1.8LService typeWheel Stud - Driver Side Front ReplacementEstimate$334.79Shop/Dealer Price$403.74 - $587.54
Show example Pontiac Vibe Wheel Stud Replacement prices

What are wheel studs and how do they work?

Wheel studs are high-strength, threaded steel fasteners that securely hold the wheel and tire assembly to the axle hub. Typically, there are 4 to 6 studs per wheel pressed or threaded into the wheel hub. The wheel and tire assembly is mounted on the hub centering ring and the studs protrude from the hub through the wheel mounting holes. Lug nuts are threaded onto the studs to securely hold the wheel to the hub.

When to consider replacing wheel studs:

  • Wheel is loose or wobbling. The wheel and tire assembly must be held evenly and securely to the wheel hub by the lug nuts attached to the studs. If the lug nuts are not tightened securely, it can cause the wheel to vibrate, loosen and wobble, which can damage or even break the wheel studs and lug nuts, potentially causing the wheel to separate from the vehicle.
  • Missing or broken studs, or damaged threads. If the stud is missing or broken, the lug nut attached to the stud will be missing and the wheel will hold securely. When the threads on the stud are worn, rusted away, or otherwise damaged, the lug nut may not achieve the required torque and could come loose while driving.
  • Stud turns in place when fastening lug nut. When the stud spins in the wheel hub while tightening, it should be replaced. During replacement, the mounting hole in the wheel hub should be inspected for damage.

How do mechanics replace wheel studs?

  • The car is raised and supported on steel jack stands.
  • The wheel and tire assembly, brake rotor, and caliper are removed.
  • On vehicles where there is sufficient access at the back of the wheel hub, a compact tool is used to press the defective stud out of the hub.
  • On vehicles where there is no access to use a compact stud remover, the wheel hub must be removed. When the hub must be pressed out of the steering knuckle, the wheel bearing is typically replaced in the process of removing the hub. Sometimes, the entire hub and bearing assembly with the studs included can be replaced.
  • The new stud or studs are pressed into position from the back of the hub, the brake caliper and rotor are reinstalled, and the wheel is placed onto the studs.
  • The wheel lug nuts are tightened to the factory specifications.

Is it safe to drive with wheel stud problems?

No, but you can temporarily drive a vehicle at low speeds and for short trips with one missing wheel stud. However, if more than two studs are broken, it is recommended to repair the car prior to further use. Having all wheel studs in place with evenly tightened lug nuts prevents distortion of the brake rotor. Over longer periods, missing studs can damage the brake rotor, the wheel, and the remaining studs. A car may vibrate when driving with missing wheel studs and can cause the other studs or lug nuts to loosen. This can lead to the wheel separating from your tire while driving.

When replacing wheel studs keep in mind:

  • Wheel studs are made of high-strength steel. If a stud has broken, it is typically due to previous overtightening. Lug nuts should be tightened using a calibrated torque wrench or a torque limiting device.
  • Published torque values assume that studs are dry, clean, and free of all lubricants. Oil, grease, anti-seize or any similar compound should not be applied to the threads of a wheel stud or lug nut.
  • Should a vehicle require removal of the wheel hub to add a new wheel stud, studs on the hub should be replaced. However, only defective studs need to be replaced if there is access from the back of the hub.
  • Lug nuts should be tightened in a star or crisscross pattern specified by the original equipment manufacturer in order to avoid warping of the brake rotor or drum as well as damaging the wheel.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Pontiac Vibe Wheel Stud Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(3)
Rating Summary
3
0
0
0
0
3
0
0
0
0

Excellent Rating

(3)
Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Pontiac Vibe Wheel Stud Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

Top 10 Tips to Be a Better Driver at Night
Nighttime Nighttime driving is inherently risky, even with modern automotive headlights. There are many threats that you might not see, from other drivers to deer and other animals in the road. Whether you’re driving in town or out in the...
Read more
How Much Does a Mechanic Make in Montana?
Automotive technician jobs in Montana have an average mechanic salary of $37k, which is approximately the national average.
Read more
What Does the Trailer Tow Hitch Warning Light Mean?
The trailer tow hitch light is designed to warn you when there is an issue with your car's tow hitch, possibly that it is unlocked.
Read more

Car jerks heavily at stops

I am sorry to see that your newer BMW is experiencing issues with noise so quickly. Though ideally I would have more information before providing a diagnosis, I will attempt to hopefully steer you in the right direction toward what...
Read more

My car got hot and it stop starting but i let it sit in the location it stop working at thrn came back crank it up and it worked

Hello, thanks for writing in. These types of issues can be frustrating and hard to diagnose. Most of the time though this will be caused by a fuel system problem. It can either be a failing inertia switch, a failing...
Read more

car stuck in reverse. And won't star

Hi Bee. Thanks for contacting us today. Quite often, the main reason why the gear shifter will become stuck in reverse is due to one of three things. First, the brake switch might be stuck or damaged. Second, the ignition...
Read more
  1. Home
  2. Estimates
  3. Pontiac
  4. Vibe
  5. Wheel Stud Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com

Read FAQ
GET A QUOTE