Pontiac Sunbird Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Pontiac Sunbird Power Steering Pressure Hose Replacement is $184 with $44 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Pontiac SunbirdL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$242.84Shop/Dealer Price$268.40 - $336.98
1990 Pontiac SunbirdL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$789.97Shop/Dealer Price$949.33 - $1422.88
1992 Pontiac SunbirdV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$306.83Shop/Dealer Price$331.57 - $399.55
1994 Pontiac SunbirdL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$307.19Shop/Dealer Price$349.35 - $471.64
1990 Pontiac SunbirdL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$457.53Shop/Dealer Price$535.43 - $760.88
1993 Pontiac SunbirdL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$307.19Shop/Dealer Price$349.49 - $471.89
1994 Pontiac SunbirdV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$459.35Shop/Dealer Price$522.25 - $704.62
1991 Pontiac SunbirdV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$292.23Shop/Dealer Price$316.79 - $384.62
Show example Pontiac Sunbird Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

John

7 years of experience
35 reviews
John
7 years of experience
Pontiac Sunbird V6-3.8L - Car does not move when I step on the gas pedal Inspection - Renton, Washington
John was super awesome and honest. He showed and explained why I needed certain things and was very helpful in making a well informed decision. Highly reccomend him.

Michael

41 years of experience
131 reviews
Michael
41 years of experience
Pontiac Sunbird L4-2.0L - Car is overheating - Columbus, Ohio
Michael was very professional, kind, courteous, attentive. He listened to what I had to say and helped to find the solution to the problem. Thank you, Mike, for everything you did to get me back on the road. 

Paul

11 years of experience
38 reviews
Paul
11 years of experience
Pontiac Sunbird L4-2.0L - Ignition Lock Assembly - Austin, Texas

Andrew

12 years of experience
962 reviews
Andrew
12 years of experience
Pontiac Sunbird L4-2.0L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Kansas City, Missouri
Very good experience with this service, Andrew was a true life saver. Will definitely be using this service again. I will definitely recommend this service to everyone that needs or could use it. Thank you

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Pontiac Sunbird services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

Industry News for Automotive Techs: August 27-September 2
Toyota and Mazda both issue major safety related recalls, Bosch introduces new version of classic water injection, and Snap-On releases best MODIS yet
10 Best Stores to Buy Auto Parts in Minneapolis, Minneapolis
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Minneapolis is Carquest.
A Buyer’s Guide to the 2012 Lexus ES
The The 2012 Lexus ES is a luxury sedan that successfully competes with the Audi A6 and Acura TL. This front-wheel drive sedan has driving comfort while providing a spacious interior whether you are carrying kids or cargo. It offers...

Why Does It Take a Long Time for a Heater to Warm Up in Winter?

The heater in a vehicle gets its warmth from the engine. The engine has to warm up, and heat up the liquid coolant circulating throughout the engine, before any heat is available for people comfort. During winter, when outside temperatures...

on my bmw the engine malfunction light came on plus the warning message engine malfunction reduced engine power displayed and sin

You will need to have the computer scanned for failure codes since there may be over 100 possible codes that will point to the cause of the problem. You will then have a better idea why the vehicle will not...

I'm having problems with my car I drive a 94 mitsubishi magna 3.0 v6 I have dramatic loss of power to the point where my 0-100km/h would be at least 30 seconds Can't get the car above 3k revs And there is a scraping noise coming from the exhaust that increases with revs

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com