Pontiac Montana Fuel Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Fuel Pump Replacement Service

How much does a Fuel Pump Replacement cost?

On average, the cost for a Pontiac Montana Fuel Pump Replacement is $796 with $369 for parts and $427 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Pontiac MontanaV6-3.4LService typeFuel Pump ReplacementEstimate$1209.81Shop/Dealer Price$1405.06 - $1966.09
2003 Pontiac MontanaV6-3.4LService typeFuel Pump ReplacementEstimate$1300.93Shop/Dealer Price$1520.44 - $2166.38
2007 Pontiac MontanaV6-3.9LService typeFuel Pump ReplacementEstimate$1336.27Shop/Dealer Price$1561.22 - $2222.92
2005 Pontiac MontanaV6-3.5LService typeFuel Pump ReplacementEstimate$1717.85Shop/Dealer Price$1958.52 - $2657.76
2002 Pontiac MontanaV6-3.4LService typeFuel Pump ReplacementEstimate$1300.93Shop/Dealer Price$1525.00 - $2174.37
2001 Pontiac MontanaV6-3.4LService typeFuel Pump ReplacementEstimate$1361.21Shop/Dealer Price$1596.29 - $2287.82
2006 Pontiac MontanaV6-3.5LService typeFuel Pump ReplacementEstimate$1336.27Shop/Dealer Price$1561.27 - $2223.00
2004 Pontiac MontanaV6-3.4LService typeFuel Pump ReplacementEstimate$1581.25Shop/Dealer Price$1870.91 - $2727.14
Show example Pontiac Montana Fuel Pump Replacement prices

What is the fuel pump and how does it work?

The fuel pump supplies pressurized gasoline to each of the fuel injectors in a car’s engine. The fuel pump is powered by a compact electric motor and is located in the vehicle’s gas tank. The pressure and output of the pump are controlled by a regulator. Filtration of the fuel occurs either in the fuel tank using a pickup screen or externally with a replaceable filter mounted in the fuel supply line.

When to consider replacing the fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced. This failed condition can sometimes be preceded or accompanied by one or more of the following symptoms:

  • Car won’t start or unexpectedly stalls and won’t re-start. A failed fuel pump may prevent a car from starting or stall it.
  • Check engine light is on. Sometimes a fuel pump will fail slowly, and that means the fuel pressure and volume slowly degrades. The lack of fuel may result in the engine operating without enough fuel relative to the amount of air, causing the check engine light to appear.
  • Whirring noise from fuel tank. As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car. If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience.

How do mechanics replace the fuel pump?

  • The fuel pump is tested to be sure it isn’t functioning.
  • Should the fuel pump be faulty, it is removed from the tank through an access panel above the tank in the passenger compartment.
  • When no access panel exists, fuel is first drained from the tank and then the fuel tank must be lowered from the vehicle to gain access to the pump.
  • In all cases, fuel pump supply and return hoses, as well as EVAP system hoses, and electrical connections to the pump must be removed.
  • Once the pump is out, any reusable brackets and pick up screens are attached to the new pump, then the new pump is installed.
  • If the fuel system uses an in-line external filter, a filter is often replaced. All hoses and electrical connections are re-established.
  • Fuel is added to the tank and the engine is run to test for leaks.

Is it safe to drive with a fuel pump problem?

Usually, it’s still safe to drive, but the pump may lead to an overheated engine and catalytic converter. Complete fuel pump failure can leave you stranded out on the road, but many times a car won’t start before initially driving.

However, if the fuel pump problem involves leaks of gasoline or vapors, it is unsafe to continue driving, and should immediately be checked by a qualified mechanic.

When replacing the fuel pump keep in mind:

  • Prior to replacing, the mechanic will power the fuel pump directly to confirm that the issue is a failed pump versus a faulty power supply to the pump.
  • Unless the fuel filter was replaced recently, whenever the fuel pump is replaced a new fuel filter should be installed.
  • When failing earlier than expected, the power supply should be verified because a voltage drop in the fuel pump circuit can lead to overheating.
  • Should the fuel tank be lowered during the repair, the fuel tank straps and fasteners should be checked for excessive corrosion and replaced as needed.
  • The fuel in the gas tank cools and lubricates the fuel pump. After installation of a new fuel pump, it’s wise to keep the gas tank at least a quarter full to maximize the life of a new fuel pump.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Pontiac Montana Fuel Pump Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You're a Construction Worker
If If you're a construction worker, you don’t have to worry about hauling a whole lot of supplies and materials to the site – that’s the boss’s problem. As long as it’s big enough to hold your tools (and most...
P0921 OBD-II Trouble Code: Gear Shift Forward Actuator Circuit Range/Performance
P0921 means there is a problem with the gear shift forward actuator circuit, likely due to a faulty actuator or bad wiring.
A Buyer’s Guide to the 2012 Suzuki Grand Vitara
When When we talk about Suzuki, the first thing that comes to mind is the company’s decision in 2012 to pull its automobile division out of the United States market. Still, some of their lineup offers desirable features, and the...

blower motor only works sometimes

You may have a blower motor that has "dead spots" when it's winding. Sometimes you can tap on the motor if it doesn't start to move again. I would try performing this simple tap test and if it starts to...

Excessive oil burning - 1986 Buick Electra Station Wagon

Hello. If the PCV system is not hooked up correctly, this will cause excessive oil burning. This needs to be checked and repaired first. If the PCV system (https://www.yourmechanic.com/services/positive-crankcase-ventilation-pcv-valve-replacement) is working then the issue is more than likely the piston...

Trying to find out what radiator I need

Hi there. If you have a radiator in your vehicle, look around the radiator to find a part number so the parts store can cross reference the radiator. If there is no part number, then remove the radiator and take...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com