Pontiac G6 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(410)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(410)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Pontiac G6 Fuel Injector Replacement is $492 with $352 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Pontiac G6V6-3.9LService typeFuel Injector ReplacementEstimate$2062.22Shop/Dealer Price$2482.87 - $3722.95
2006 Pontiac G6L4-2.4LService typeFuel Injector ReplacementEstimate$926.67Shop/Dealer Price$1123.67 - $1710.56
2009 Pontiac G6V6-3.5LService typeFuel Injector ReplacementEstimate$1992.91Shop/Dealer Price$2397.62 - $3600.44
2010 Pontiac G6V6-3.5LService typeFuel Injector ReplacementEstimate$1992.91Shop/Dealer Price$2397.61 - $3600.43
2005 Pontiac G6V6-3.5LService typeFuel Injector ReplacementEstimate$1710.97Shop/Dealer Price$2049.17 - $3043.51
2007 Pontiac G6L4-2.4LService typeFuel Injector ReplacementEstimate$849.39Shop/Dealer Price$1027.24 - $1556.29
2006 Pontiac G6V6-3.5LService typeFuel Injector ReplacementEstimate$1932.95Shop/Dealer Price$2322.71 - $3480.59
2008 Pontiac G6V6-3.6LService typeFuel Injector ReplacementEstimate$1390.44Shop/Dealer Price$1665.30 - $2481.13
Show example Pontiac G6 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(410)

Rating Summary
387
10
4
1
8
387
10
4
1
8

Ernesto

30 years of experience
28 reviews
Ernesto
30 years of experience
G6 2008 - Check Engine Light is on - Oconomowoc, WI
This was the most pleasant, interesting, educational and satisfying experience I've ever had with a mechanic. He was so thorough and knowledgable of what he was doing to solve the problems of my vehicle. He is a gift to all of us that need help with car problems. I rated Ernesto great because that what he is as a mechanic and as a person. He will be highly recommended by me in the future.

Augustine

10 years of experience
110 reviews
Augustine
10 years of experience
G6 2006 - Starter - Albuquerque, NM
Arrived on time, and quickly exchange the starter. Friendly and helpful. We will call again for further repairs

Bryant

8 years of experience
568 reviews
Bryant
8 years of experience
G6 2005 - Battery will not hold a charge - Indianapolis, IN
I really appreciate bryant he was quick he told me whats wrong and what i meed to do i will be calling for him in the future

Collins

8 years of experience
362 reviews
Collins
8 years of experience
G6 2007 - Tie Rod End - Atlanta, GA
Collins is easy to be around. I kept him company and chatted him out. He responedd very kindly to me

Excellent Rating

(410)

Rating Summary
387
10
4
1
8
387
10
4
1
8
Number of Pontiac G6 services completed
4510+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

How to Calculate the Value of a Salvaged Car
An unfortunate part of driving is the possibility of a collision that’s severe enough to write off your car as a total loss. While the most important concern in any collision is the safety of all the involved parties, you’re...
How to Install Tire Chains
Winter Winter weather has a reputation for being dangerous and unpredictable. There are days where you would prefer to sit inside with a mug of cocoa and read a book, but life demands that you venture out onto snowy roads....
How to Renew Your Car Registration in New York
Current Current and new residents of New York are required to have their cars registered with the New York DMV. Having a registration is imperative for you to drive on the New York roadways without fear of getting ticketed. Every...

Power seat stuck forward

Hi there. If your power seat is not working it can be 1 of 2 things. Firstly, this can be an issue with the fuse that is connected inline for the power seats to work. Secondly, it can be your...

My car will start, just not run.

Hi, thanks for writing in. I would start with testing your battery and alternator with a multi meter. Good batteries (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-car-battery) hold a charge of 12.6 volts or higher. If the battery is low, try to jump start it. If...

My brakes are overheating; could the brake fluid be contaminated?

If your brake fluid boiled during this or any past overheating incidents, then yes, the fluid is likely contaminated with air and other gases. Brake fluid is hygroscopic, and a consequence of that is when the fluid gets hotter than...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com