Plymouth Grand Voyager Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(50)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(50)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Plymouth Grand Voyager Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Plymouth Grand VoyagerV6-3.3LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1999 Plymouth Grand VoyagerV6-3.0LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 Plymouth Grand VoyagerV6-3.0LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 Plymouth Grand VoyagerV6-3.0LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1987 Plymouth Grand VoyagerL4-2.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1995 Plymouth Grand VoyagerV6-3.3LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 Plymouth Grand VoyagerV6-3.3LService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1996 Plymouth Grand VoyagerV6-3.0LService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Plymouth Grand Voyager Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Plymouth mechanics

Real customer reviews from Plymouth owners like you.

Excellent Rating

(50)

Rating Summary
46
2
0
0
2
46
2
0
0
2

Rodney

36 years of experience
544 reviews
Rodney
36 years of experience
Plymouth Grand Voyager V6-3.3L - Wheel Bearings Replacement (Driver Side Front) - Sacramento, California
On time, efficient, knowledgeable and friendly. A+

Noe

36 years of experience
604 reviews
Noe
36 years of experience
Plymouth Grand Voyager V6-3.3L - Water Pump Replacement - Renton, Washington
Outstanding experience!

Ian

10 years of experience
79 reviews
Ian
10 years of experience
Plymouth Grand Voyager V6-3.0L - Car does not move when I step on the gas pedal - Virginia Beach, Virginia
Great experience

Jose

17 years of experience
433 reviews
Jose
17 years of experience
Plymouth Grand Voyager V6-3.0L - Car is not starting - Portland, Oregon
Thank you Jose! You are the best! Very knowledgeable and always on time

Excellent Rating

(50)

Rating Summary
46
2
0
0
2
46
2
0
0
2
Number of Plymouth Grand Voyager services completed
550+
services done by our mechanics
TOTAL NUMBER OF EXPERT Plymouth MECHANICS
100+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Slipping Transmission?
The transmission converts the power from the engine into motion so the vehicle can move. Vehicles have either an automatic or manual transmission....
P0474 OBD-II Trouble Code: Exhaust Pressure Sensor Intermittent
P0474 means there is an abnormal voltage reading caused by the exhaust back pressure regulator or a clogged back tube.
How to Replace Axle Seals
Axle seals fail when there is a visible leak or a major puddle of gear oil underneath the vehicle. In some cases, the axle may pop out entirely.

What are roller rockers for and what would cause them to have rust

Roller rockers are used to push down the valve spring with less resistance than a traditional rocker. The entire valve train should be constantly bathed in oil when the engine is running and the rollers could only get rust on...

My Volkswagen Golf GTI is idling above 1000 revs and engine stalls

First you want to look for vacuum leaks. Any air that gets into the engine without going through proper channels can cause bad behavior like you describe. Look under the hood for broken or loose vacuum hoses or any large...

How to reset check engine light on

You should replace the mass air sensor for code P0101 and then have codes cleared by using an OBD2 scanner or have a mechanic clear them for you.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com