Oldsmobile Cutlass Calais Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Oldsmobile Cutlass Calais Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1983 Oldsmobile Cutlass CalaisV6-3.8LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1990 Oldsmobile Cutlass CalaisL4-2.5LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1983 Oldsmobile Cutlass CalaisV8-5.7L DieselService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 Oldsmobile Cutlass CalaisL4-2.3LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1981 Oldsmobile Cutlass CalaisV8-4.3LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1978 Oldsmobile Cutlass CalaisV8-4.3LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1982 Oldsmobile Cutlass CalaisV8-5.7L DieselService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1980 Oldsmobile Cutlass CalaisV8-4.3LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Oldsmobile Cutlass Calais Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Ned

24 years of experience
52 reviews
Ned
24 years of experience
Oldsmobile Cutlass Calais V6-3.8L - Car is not starting - Scottsdale, Arizona
Ned is most thorough and professional;highly knowledgeable. He's a first rate automotive technician.

Fred

17 years of experience
389 reviews
Fred
17 years of experience
Oldsmobile Cutlass Calais V8-5.0L - Adjust Ignition Timing - Spring, Texas
Came to do my timing, diagnosed bad harmonic balancer I totally agree with his assessment. Will be having new one installed.

Ronnaldo

11 years of experience
49 reviews
Ronnaldo
11 years of experience
Oldsmobile Cutlass Calais L4-2.3L - Serpentine/Drive Belt - McDonough, Georgia
He was great, professional and knowledgeable.

Robert

42 years of experience
232 reviews
Robert
42 years of experience
Oldsmobile Cutlass Calais V8-5.0L - Brake Pads Replacement (Front) - Spring, Texas
Got right down to business,did good job and went above and beyond.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Oldsmobile Cutlass Calais services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

P0025 OBD-II Trouble Code: Camshaft Position B - Timing Over-Retarded (Bank 2)
P0025 P0025 code definition Camshaft Position B - Timing Over-Retarded (Bank 2) What the P0025 code means P0025 is the OBD-II generic code indicating the Engine Control Module (ECM) has determined that the exhaust variable camshaft timing for bank 2...
Mercedes-Benz Certified Pre-Owned (CPO) Car Program
Shopping Shopping for a used Mercedes-Benz vehicle often leads many drivers to consider certified pre-owned options. Mercedes-Benz is one of many manufacturers that have a certified pre-owned (CPO) program. Each car manufacturer structures their CPO program differently; read on to...
10 Best Brands for Automotive Tool Sets
Automotive technician jobs require a good set of tools. Craftsman, Makita, and Husky are some of the best brands that sell quality mechanic tools.

Where could this oil leak be coming from?

Hello. You mention the power steering reservoir, so just be sure it is oil and not power steering fluid which of course would change the nature of the repair. To answer one of your concerns, if oil leaks onto the...

When I try starting the veichal it just clicks

What you are describing sounds like a faulty starter solenoid (https://www.yourmechanic.com/services/starter-replacement). A faulty starter solenoid will generally produce a clicking sound when turning the key. The starter solenoid is located on the starter and has internal electrical contacts that transmit...

I'm trying to get a code for my t5 radio can u help plrase

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com