Oldsmobile Alero Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(161)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(161)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Oldsmobile Alero Fuel Injector Replacement is $625 with $471 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Oldsmobile AleroV6-3.4LService typeFuel Injector ReplacementEstimate$2559.88Shop/Dealer Price$3094.40 - $4673.66
2002 Oldsmobile AleroL4-2.2LService typeFuel Injector ReplacementEstimate$1487.19Shop/Dealer Price$1820.86 - $2817.32
2003 Oldsmobile AleroV6-3.4LService typeFuel Injector ReplacementEstimate$2532.85Shop/Dealer Price$3062.15 - $4637.49
2004 Oldsmobile AleroV6-3.4LService typeFuel Injector ReplacementEstimate$2532.85Shop/Dealer Price$3062.14 - $4637.48
2000 Oldsmobile AleroV6-3.4LService typeFuel Injector ReplacementEstimate$2532.85Shop/Dealer Price$3066.56 - $4645.22
1999 Oldsmobile AleroL4-2.4LService typeFuel Injector ReplacementEstimate$1160.23Shop/Dealer Price$1398.53 - $2106.71
2003 Oldsmobile AleroL4-2.2LService typeFuel Injector ReplacementEstimate$1487.19Shop/Dealer Price$1820.90 - $2817.40
2001 Oldsmobile AleroL4-2.4LService typeFuel Injector ReplacementEstimate$1160.23Shop/Dealer Price$1398.32 - $2106.34
Show example Oldsmobile Alero Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(161)

Rating Summary
148
6
1
3
3
148
6
1
3
3

PETE

23 years of experience
96 reviews
PETE
23 years of experience
Oldsmobile Alero V6-3.4L - Serpentine/Drive Belt - Newark, Delaware
Pete was early witch is unheard of nowadays. Very polite and will answer any questions you have. Friendly and professional. Will be using him very soon for the rest of the recommended work. Thanks Pete 

Sam

16 years of experience
123 reviews
Sam
16 years of experience
Oldsmobile Alero L4-2.2L - Car is not starting - Edmond, Oklahoma
Fast, efficient, and thorough.

Kyle

13 years of experience
113 reviews
Kyle
13 years of experience
Oldsmobile Alero V6-3.4L - Oil Change - Las Vegas, Nevada
Very personable and professional. Easy to communicate with , highly recommend Kyle. Thanks Kyle!

Joshua

14 years of experience
19 reviews
Joshua
14 years of experience
Oldsmobile Alero V6-3.4L - Car is not starting - Vallejo, California
He basically had me sit in the driver seat and he took a crowbar type thing and hit the starter on my car and asked me to turn the key as he banged on my car's starter several times and pronounced that it is probably the starter. So, if I hire YourMechanic to replace my starter, you will credit the $80 from the quote of $232 cost of the repair, correct? And, if it turns out that it wasn't the starter after all, then what? Am I out the $80 and the $232 and then another $80 for yet another inspection and then god knows how much more $$ for more repairs? Just would like a clearer picture of all this, please? Thank you.

Excellent Rating

(161)

Rating Summary
148
6
1
3
3
148
6
1
3
3
Number of Oldsmobile Alero services completed
1771+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

How to Make Your Car Driver's Seat More Comfortable
The most comfortable driver's seats are car seats that are properly adjusted, have warm car seat covers, and built-in lumbar support to prevent aches.
Understanding the Chrysler Oil Change Indicator and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Chrysler Oil Change Indicator lets you know when and what service your car needs.
What Are the Dangers of Driving a Vehicle With a Broken Suspension?
Every car, truck, and SUV has a suspension, the collection of parts that holds the car off the ground, cushions passengers and cargo from bumps,...

Can i drive long distance with bad pcv valve

Hi there. Although its never recommended to drive any longer than you should with a damaged component, driving 12 hours with a damaged PCV valve could be very risky. The Positive Crankcase Ventilation (PCV) valve is responsible for transferring excess...

Did my steering wheel locked up because I did not have any oil in my car?

If you are referring to engine oil, lack of engine oil might cause the engine to stop and that would cause loss of power steering. If, though, you are referring to the power steering hydraulic fluid (the PS system uses...

Hi! I changed my oil yesterday and must have used the wrong filter because my [engine](/topics-engine-toyota/) cut off and I had to pull over. Turns out the filter fell off and oil splashed all over the engine block. Got it towed, changed the oil again and used the correct filter but now the car won't start

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com