Oldsmobile 98 Crankshaft Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(30)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(30)

Crankshaft Position Sensor Replacement Service

How much does a Crankshaft Position Sensor Replacement cost?

On average, the cost for a Oldsmobile 98 Crankshaft Position Sensor Replacement is $210 with $42 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Oldsmobile 98V6-3.8LService typeCrankshaft Position Sensor ReplacementEstimate$270.98Shop/Dealer Price$296.55 - $363.52
1994 Oldsmobile 98V6-3.8LService typeCrankshaft Position Sensor ReplacementEstimate$274.77Shop/Dealer Price$298.40 - $363.92
1994 Oldsmobile 98V6-3.8L TurboService typeCrankshaft Position Sensor ReplacementEstimate$435.36Shop/Dealer Price$461.06 - $528.14
1995 Oldsmobile 98V6-3.8LService typeCrankshaft Position Sensor ReplacementEstimate$260.17Shop/Dealer Price$283.64 - $349.05
1992 Oldsmobile 98V6-3.8LService typeCrankshaft Position Sensor ReplacementEstimate$303.21Shop/Dealer Price$335.89 - $424.21
1993 Oldsmobile 98V6-3.8LService typeCrankshaft Position Sensor ReplacementEstimate$274.77Shop/Dealer Price$298.61 - $364.29
1993 Oldsmobile 98V6-3.8L TurboService typeCrankshaft Position Sensor ReplacementEstimate$435.36Shop/Dealer Price$461.10 - $528.21
1991 Oldsmobile 98V6-3.8LService typeCrankshaft Position Sensor ReplacementEstimate$303.21Shop/Dealer Price$333.98 - $420.85
Show example Oldsmobile 98 Crankshaft Position Sensor Replacement prices

What is the Crankshaft Position Sensor all about?

Many newer cars have computerized engine management systems that rely on sensors to report data to the computer. The crankshaft position sensor is used in conjunction with the camshaft position sensor to control ignition timing and to let the computer know when to inject fuel and provide spark sequence. Due to the mounting locations of this sensor, it is common for heat and oil leaks to cause this sensor to fail.

Keep in mind:

  • Damage to the crankshaft position sensor is sometimes caused by leaking oil, which means there may be another component of your vehicle that needs replacement or repair.
  • The electrical connector can also be damaged, and should be inspected every time the position sensor is replaced.

How it's done:

  • Scan the car for trouble codes.
  • Remove and replace crankshaft position sensor.
  • Clear trouble codes.
  • Check for the proper operation of the car.

Our recommendation:

The crankshaft position sensor will usually let you know when it needs replacing. The Check Engine warning light will illuminate and you may notice that your vehicle has a hard time starting or running smoothly. When you notice any of these signs, schedule an inspection.

What common symptoms indicate you may need to replace the Crankshaft Position Sensor?

  • Car does not start.
  • Check engine light is on.
  • Car misfires (car runs rough).

How important is this service?

The crankshaft position sensor relays critical information to your vehicle’s computer management system. The sensor provides the management system with the information it needs to control ignition timing, and it lets the computer know when it needs to provide sparks and fuel. Without a functioning crankshaft position sensor, the computerized management system doesn’t receive this critical information, and the vehicle will either not start, or will misfire while you’re driving it.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(30)

Rating Summary
29
0
0
0
1
29
0
0
0
1

Greg

21 years of experience
112 reviews
Greg
21 years of experience
98 1995 - Car is not starting - Apache Junction, AZ
Arrived on time with all possible needed tools. Very knowledgeable and was able to locate and repair what other shops were unable to accomplish. Highly recommend him and would call him again.

Ben

34 years of experience
1419 reviews
Ben
34 years of experience
98 1995 - Oil Pressure Light is on - Houston, TX
They just sent an email saying the mechanic is on his way. It is only 8:12 am! He is off to a good start. He is supposed to arrive between 9:00-9:30 am. He arrived well before that time! It was not 9:00 am yet! He did a diagnostic and he checked all the work I did. He said I did great work with everything I did. He said the car is very good shape. He said this car is indeed a runner! He checked everything. He checked all the fuses and relays too. He did a complete diagnostic too. He checked fuel pressure, oil pressure, and more. He found out what it was. It had nothing to do with oil pressure or anything. The fuel pump is going out. When he came the car started right up. He said they never go totally out. He said that is why it started when it did. He connected tools I do not have to the Ninety Eight. It is not getting any fuel pressure, and this is why it shut off all the times it did. He fixed one of the spark plug wires too. It was burnt. He jacked the Ninety Eight up and got underneath and checked the wires, the oil pressure sensor/switch and oil level sender for everything and the connections and made sure they have power and were installed correctly. He said the engine uses oil pressure along with the fuel pressure to start. The fuel pressure is non existent and that is why it would not start. After all of that, he looked at the Oldsmobile Toronado, my other car . He got the air conditioner to work again. He said the compressor bolt was loose and he tightened it up. He used this huge screw driver device and bent it back in place. He said the shims were loose and he bent them back. It cools just fine now. We turned it on and off several times testing it. He checked the pressure and it was filled with refrigerant. He checked the relays and the fan too. It was all fine. He said it is clear you take care of both of your cars. He said one thing I will not do is guess and I like to know what is indeed wrong. He said your cars are in good shape. He said you do not need valve cover gaskets. There is no leak. I booked him to return to install the fuel pump I need. I look forward to seeing him again soon in a few weeks. Today only cost me 70.00. That's it.

Breck

15 years of experience
760 reviews
Breck
15 years of experience
98 1995 - Oil Pressure Light is on - Houston, TX
The mobile mechanic came. I must say I am impressed! He found my house. He and I started talking. He said he owned two Ninety Eights previously. He was there to look at my Oldsmobile Ninety Eight. He had two Oldsmobile Ninety Eight Touring Sedans. The ones he owned were from the 1987-1990 era. He was describing the floor shifters and they had and how much he liked Ninety Eights, Touring Sedans, and the Oldsmobile Eighty Eight LSS too. He talked about how a family member owned one and how he was fixing his. He talked in detail about the Touring Sedan and the things he loved. He asked me how long had I owned my Ninety Eight. I told him 2003. He told me how he become a mechanic and went to school for it and more. He got into the Ninety Eight and it would not start. He got out and disconnected the battery and rubbed the negative and positive battery terminals together. He reconnected them and the Ninety Eight started! The instrumentation then told him exactly what it was. There is a sensor at the bottom of the oil pan. He said by doing what he did with the terminals, it cleared the computer and reset it. We went underneath the car and he showed me the sensor. He said which one did you replace? I told him. He said you were on the right path. You know what you are doing. You need to replace this sensor and not the one you did. You can get the sensor and replace it because it is clear you know what you are doing and on the right path. He said you also need to replace your valve cover gaskets. They are leaking. I told him I will request him to come back and do that. I am not doing that even thought I can.

Lucas

10 years of experience
1083 reviews
Lucas
10 years of experience
98 1995 - Crankshaft Position Sensor - North Hills, CA
On time and professional. Lucas did a great job. I highly recommend him and will be happy to have him handle my cars service needs in the future.

Excellent Rating

(30)

Rating Summary
29
0
0
0
1
29
0
0
0
1
Number of Oldsmobile 98 services completed
330+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Air Charge Temperature Sensor
Common signs include a lack of power when accelerating, trouble when starting in cold weather, and a decrease in fuel efficiency.
How to Replace an Anti-Lock Brake Fluid Level Sensor on Most Modern Cars
The anti-lock brake (ABS) system has a fluid level sensor that fails when the warning light comes on or if there is low fluid in the reservoir.
How Long Does an Air Cleaner Temperature Sensor Last?
An An air cleaner temperature sensor is not overly common on newer vehicles. This is because in order to ensure that your car engine operates the way it should, several electronic sensors may actually be needed. However, if you drive...

My car is shutting down in low gear/idle immediately after transmission rebuild & minor updated engine parts

First, I am sorry to hear that you are having such a poor experience with this repair. Unfortunately, there is only one way to know if your car is ready to be driven without any problems - you will need...

Will the camshaft position sensor cause my car to keep cutting off while I'm driving it?

Hi there. The camshaft position sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) could cause an engine to stall out. Check the sensor and see if its plugged in. Make sure that the sensor is attached to the engine properly and make sure that the sensor...

Low coolant light came on.

Hi there. Check the coolant level sensor on the radiator and make sure that it's plugged in. If the radiator was replaced, there is a good possibility that the coolant level sensor could have been slightly plugged in and then...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com