Nissan Xterra Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(42)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(42)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Nissan Xterra Brake Pad Replacement is $212 with $72 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Nissan XterraV6-3.3LService typeBrake Pads - Front ReplacementEstimate$394.22Shop/Dealer Price$457.63 - $639.74
2002 Nissan XterraV6-3.3L TurboService typeBrake Pads - Rear ReplacementEstimate$440.65Shop/Dealer Price$516.15 - $738.52
2001 Nissan XterraL4-2.4LService typeBrake Pads - Front ReplacementEstimate$373.93Shop/Dealer Price$432.77 - $605.12
2003 Nissan XterraL4-2.4LService typeBrake Pads - Rear ReplacementEstimate$385.21Shop/Dealer Price$446.87 - $627.68
2011 Nissan XterraV6-4.0LService typeBrake Pads - Rear ReplacementEstimate$385.21Shop/Dealer Price$448.35 - $630.26
2002 Nissan XterraL4-2.4LService typeBrake Pads - Rear ReplacementEstimate$440.65Shop/Dealer Price$516.31 - $738.81
2000 Nissan XterraL4-2.4LService typeBrake Pads - Front ReplacementEstimate$373.93Shop/Dealer Price$432.79 - $605.15
2001 Nissan XterraV6-3.3LService typeBrake Pads - Front ReplacementEstimate$373.93Shop/Dealer Price$432.77 - $605.12
Show example Nissan Xterra Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(42)

Rating Summary
41
1
0
0
0
41
1
0
0
0

Augustine

10 years of experience
110 reviews
Augustine
10 years of experience
Xterra 2006 - Brake Pads - Albuquerque, NM
Great job

Michael

35 years of experience
28 reviews
Michael
35 years of experience
Xterra 2006 - Battery will not hold a charge - San Antonio, TX
Mike is experienced and walks you through the process. He is fantastic.

Bill

30 years of experience
52 reviews
Bill
30 years of experience
Xterra 2006 - Crankshaft Position Sensor - Denver, CO
Bill did great work.

Jason

0 years of experience
20 reviews
Jason
0 years of experience
Xterra 2012 - Strut Assembly - Tampa, FL
Jason was excellent completing the job in a timely manner Very appreciative of his recommendations of issues on vehicle that need to be addressed

Excellent Rating

(42)

Rating Summary
41
1
0
0
0
41
1
0
0
0
Number of Nissan Xterra Brake Pad Replacement services completed
462+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

P2006 OBD-II Trouble Code: Intake Manifold Runner Control Stuck Closed Bank 1
P2006 trouble code definition The P2006 code is a generic OBD2 diagnostic trouble code relating to the intake manifold runner control circuit....
P0239 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Malfunction
P0239 P0239 code definition Turbocharger Boost Sensor B Circuit Malfunction What the P0239 code means P0239 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects an intake boost pressure sensor B input malfunction when compared to...
A Buyer’s Guide to the 2012 Buick LaCrosse
Over Over the past several years, Buick has returned to form when it comes to luxury sedans, and the 2012 Buick LaCrosse is a standout even when compared to some of the other big names in luxury. Key Features The...

Lights don't work correctly, ABS warning on

Hello there, these are not uncommon problems for a vehicle to have when it sits for awhile. With the ABS light on, the most likely cause is low or poor condition brake fluid. Brake fluid absorbs moisture and can cause...

I started my car and turn on AC but it would not start.

It will take a bit of deeper diagnosis to tell what is going on with the vehicle as it seems you have multiple concerns going on. An air conditioning system with a low refrigerant charge may not turn on because...

My secondary air system, a/c refrigerant, erg flow & heated catalyst is not supported through my diagnosis. Have any suggestions?

Engine coolant is not normally added to a vehicle's cooling system as that system is well sealed and uses a recovery tank. The only reason you would have to add coolant is if there is a leak. You should, of...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com