Nissan Pathfinder Armada Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(30)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(30)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Nissan Pathfinder Armada Wheel Bearings Replacement is $163 with $23 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
* Nissan Pathfinder ArmadaV8-5.6LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$373.15Shop/Dealer Price$431.77 - $603.52
* Nissan Pathfinder ArmadaV8-5.6LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$208.11Shop/Dealer Price$225.50 - $273.48
2004 Nissan Pathfinder ArmadaV8-5.6LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$191.17Shop/Dealer Price$205.80 - $242.18
* Nissan Pathfinder ArmadaV8-5.6LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$208.11Shop/Dealer Price$225.50 - $273.48
Show example Nissan Pathfinder Armada Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(30)

Rating Summary
29
0
0
0
1
29
0
0
0
1

Daniel

16 years of experience
37 reviews
Daniel
16 years of experience
Nissan Pathfinder Armada V8-5.6L - Brake Pads Replacement (Front, Rear) - Southlake, Texas
Daniel was great. Will definitely recommend to everyone and anyone.

Alfonso

12 years of experience
9 reviews
Alfonso
12 years of experience
Nissan Pathfinder Armada V8-5.6L - Strut Assembly Replacement (Front) - Modesto, California
Awesome job! Very patient and communicative in explanation regarding how suspensions work and operate. Will recommend him to anyone.

Matthew

34 years of experience
1438 reviews
Matthew
34 years of experience
Nissan Pathfinder Armada V8-5.6L - Starter - Norfolk, Virginia
Once again I rate Matt above and beyond a scale of 10. He was very professional, well respectful, great at what he does providing the service requested with my repairs. Highly recommended to others and look fwd to having him service my vehicles in the future when the need is there. He was very timely and even called to see if he could come sooner to get the job completed. A++ job! Keep up the well rounded work. Thanks to him.

Patrick

34 years of experience
1579 reviews
Patrick
34 years of experience
Nissan Pathfinder Armada V8-5.6L - Car is not starting - Austin, Texas
Knowledgeable individual. I appreciate his promptness , attention to detail, consideration and thoroughness.

Excellent Rating

(30)

Rating Summary
29
0
0
0
1
29
0
0
0
1
Number of Nissan Pathfinder Armada services completed
330+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Replace a Fuel Filler Cap
A good fuel filler cap safely seals the fuel tank. Signs of a failing fuel cap include the smell of gas, stripped threads, or a cracked cap.
P0334 OBD-II Trouble Code: Knock Sensor 2 Circuit Input Intermittent (Bank 2)
P0334 P0334 code definition The P0334 Trouble Code indicates that the knock sensor on a cylinder is not working according to the manufacturer’s specifications. What the P0334 code means The code means that there is a problem with one of...
Top 10 Ways to Make Your Car More Green
Every car produces greenhouse gases. You can reduce your car's environmental impact with tune-ups, filling the tires, and making your car lightweight.

Where are the supplemental restraint system warning labels located?

Your Altima includes two supplemental restraint system (SRS) warning labels. You’ll find one on the outside of the driver side sun visor, and another on the outside of the passenger side sun visor. These warning labels provide important safety information...

when i turn key it starts then when i let off it cuts off

This is most commonly the ignition switch electrical. It is an important distinction to make. There is the "electrical ignition switch" and the "ignition lock cylinder" that the key inserts. It is very common for Honda's to exhibit this symptom....

The car doesn’t start. I get a code that says incorrect response from immobilized control module

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com