Nissan Maxima Brake Drum Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Nissan Maxima Brake Drum Replacement is $267 with $172 for parts and $95 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2000 Nissan MaximaV6-3.0L	Service typeBrake Drum Replacement	Estimate$573.73	Shop/Dealer Price$692.79 - $1020.72
1998 Nissan MaximaV6-3.0L	Service typeBrake Drum Replacement	Estimate$547.73	Shop/Dealer Price$666.81 - $994.76
2017 Nissan MaximaV6-3.5L	Service typeBrake Drum Replacement	Estimate$577.64	Shop/Dealer Price$698.71 - $1023.61
1992 Nissan MaximaV6-3.0L	Service typeBrake Drum Replacement	Estimate$635.51	Shop/Dealer Price$753.13 - $1038.52
2001 Nissan MaximaV6-3.0L	Service typeBrake Drum Replacement	Estimate$547.73	Shop/Dealer Price$666.83 - $994.79
1991 Nissan MaximaV6-3.0L	Service typeBrake Drum Replacement	Estimate$635.51	Shop/Dealer Price$753.20 - $1038.64
2002 Nissan MaximaV6-3.5L	Service typeBrake Drum Replacement	Estimate$554.23	Shop/Dealer Price$673.13 - $1000.95
2005 Nissan MaximaV6-3.5L	Service typeBrake Drum Replacement	Estimate$554.23	Shop/Dealer Price$673.62 - $1001.80

Show example Nissan Maxima Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

Raise the vehicle and safely support it using steel jack stands.
Remove tire and wheel assembly.
Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(1,154)

Rating Summary

1,069

43

12

6

24

1,069

43

12

6

24

SEE REVIEWS NEAR ME

Kevin

24 years of experience

532 reviews

Kevin

24 years of experience

by Darnell

Nissan Maxima V6-3.5L - Transmission fluid is leaking - Lawrenceville, Georgia

He was on time. Nice guy explained what was wrong with my car and why it was doing that. Very knowledgeable and helpful. I would recommend Kevin to anyone.

Joe

43 years of experience

821 reviews

Joe

43 years of experience

by Joseph

Nissan Maxima V6-3.5L - Tie Rod End Replacement (Front Right Outer) - Tampa, Florida

Joe is a great guy and very professional. He corrected the problem in great time. I would recommend him to anyone who needs car repairs.

Chris

20 years of experience

448 reviews

Chris

20 years of experience

by John

Nissan Maxima V6-3.5L - Engine or Transmission Mount Replacement - Vancouver, Washington

Chris was on time and promptly got to work on a difficult and time consuming engine mount replacement; a problem with the part I supplied required more time to complete the repair than anticipated, yet Chris was able to rearrange his schedule to complete the repair the same day. This required him to make a second trip (during rush hour traffic) to finish a frustrating installation, yet he never lost his cheerful "can do" attitude and quickly finished the repair. I've worked with literally hundreds of mechanics of various trades over the course of my career in engineering and I found Chris to have the level of expertise and pride in his work that sets him apart as one of the dwindling number of true "Pros" I encounter today. I'll definitely have him back in future and recommend Chris without reservation, he'll get the job done.

Clark

16 years of experience

18 reviews

Clark

16 years of experience

by Stan

Nissan Maxima V6-3.0L - Starter - Portland, Oregon

Clark was very professional, knowledgable and clean. I would 100% recommend Clark.

Excellent Rating

(1,154)

Rating Summary

1,069

43

12

6

24

1,069

43

12

6

24

SEE REVIEWS NEAR ME

Recent articles & questions

The Best Used Cars to Buy If You’re a Plumber

Plumbers Plumbers need to carry around all manner of tools and supplies. If you’re plumbing a large building, or even a decent sized home, you’re going to need a vehicle that has quite a bit of cargo capacity. A car...

How Much Does a Mechanic Make in California?

Automotive technician jobs in California have an average salary of $44K, and the state industry is growing rapidly.

The Guide to Right-of-Way Laws

One One of the most important facets of being a safe driver is understanding right-of-way laws. Right-of-way laws are the laws that govern who gets priority of the road, and who gets to go first when two drivers (or a...

What functions are on the turn signal and headlight stalk?

Several key functions are built into this control, including the following: Turn Signals: Flip the stalk up or down to activate your left or right turn signal. Headlights: Turn the control to activate parking and taillights, and headlights. AUTO: Choose...

My car jerks when I accelerate

This may be a sign of a dirty or failing mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). The mass air flow sensor reads the air intake as it is mixed with fuel prior to being injected into the motor. When this fails,...

My 2005.1 Audi S4 Avant starts when the engine is cold just fine, however when it's warmed up it won't start. Cranks won't catch

Hi there. When a car is hard to start when it is warmed up or hot, it's typically due to a fuel system issue; ranging from a mass air flow sensor that is faulty, clogged fuel injectors or a throttle...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com