Mitsubishi Sigma Camshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,978)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,978)

Camshaft Seal Replacement Service

How much does a Camshaft Seal Replacement cost?

On average, the cost for a Mitsubishi Sigma Camshaft Seal Replacement is $668 with $183 for parts and $484 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Mitsubishi SigmaV6-3.0LService typeCamshaft Seal ReplacementEstimate$1063.37Shop/Dealer Price$1227.98 - $1600.30
1989 Mitsubishi SigmaV6-3.0LService typeCamshaft Seal ReplacementEstimate$851.15Shop/Dealer Price$993.92 - $1307.27
Show example Mitsubishi Sigma Camshaft Seal Replacement prices

What is the Camshaft Seal all about?

Like the crankshaft, the camshaft is an essential component of the combustion process that moves your car down the road. Its motion is responsible for instigating valve movement, which regulates the air/fuel mixture that fuels the “big bang.” The camshaft uses lobes (called cams) to push against and open the valves as the camshaft rotates (springs on the valves return them to their closed position) in sync with the pistons. Note: Both valves are closed during compression and combustion so that the combustion chamber is sealed.

The camshaft seal fits between the camshaft and the cylinder head, sealing the camshaft between the top of the head and the valve cover. Like all of an engine’s internal moving parts, the camshaft must be well lubricated, essentially submerged in oil, to do its job properly. Without the camshaft seal, this lubricating oil would leak out of the engine block, befouling the engine bay and putting the engine’s internal components in danger from insufficient lubrication. It also keeps contaminants like dust and dirt from damaging the engine’s internal components.

Keep in mind:

  • Typically, camshaft seals do not need to be replaced unless other components, such as the camshaft, are being replaced.
  • Replace the timing belt when replacing the camshaft seals, and vice versa.
  • A leak from the camshaft seal or valve cover gasket are hard to tell apart if the valve cover gasket is leaking in the same area as the cam seal.

How it's done:

  • The battery is disconnected
  • The camshaft timing belt and gear is removed
  • The camshaft seal is replaced
  • The timing gear and timing belt is reinstalled
  • The battery is reconnected and timing checked and vehicle checked for leaks.

Our recommendation:

One of the most important parts of your car, the camshaft seal is made from a durable material, capable of withstanding extreme temperatures and pressures. But if it fails, replacement is the only cure. The good news is that the seal is a relatively inexpensive component, but note that replacing it can be a labor-intensive job.

What common symptoms indicate you may need to replace the Camshaft Seal?

  • Oil leaking from behind the timing cover.
  • The leak will eventually damage the car’s timing belt or cause it to slip, which will in turn throw the entire combustion process off kilter: the engine will run rough, there will be a noticeable loss of power, overheating issues, stalling and backfiring, excess smoke pouring out of the exhaust, and more.

How important is this service?

Loss of oil could cause the engine to seize, and a leak could develop into a potential fire hazard as the mixes with dirt and other contaminants. Replace the camshaft seal sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(1,978)

Rating Summary
1,850
73
15
13
27
1,850
73
15
13
27

Keven

7 years of experience
131 reviews
Keven
7 years of experience
Mitsubishi Lancer L4-2.0L - Camshaft Seal Replacement - Bellevue, Washington
Smooth process! Keven knows his stuff, arrived on time, and is extremely easy going and fun to talk with. Finished the task faster than expected. A+

David

36 years of experience
195 reviews
David
36 years of experience
Mitsubishi Lancer L4-2.0L - Camshaft Seal - Pasadena, California
Once again, David came through. Did the job well, explained the issue and did not try and up sell me (one thing mechanics seem to do all the time). He also finished BEFORE the estimated time of completion he originally stated. Well done!

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Mitsubishi Endeavor V6-3.8L - Camshaft Seal - Ponte Vedra Beach, Florida
Great job. Very pleased.

Kevin

33 years of experience
234 reviews
Kevin
33 years of experience
Mitsubishi Eclipse L4-2.4L - 75 Point Safety Inspection - Bell, California

Excellent Rating

(1,978)

Rating Summary
1,850
73
15
13
27
1,850
73
15
13
27
Number of Mitsubishi services completed
21758+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
700+
experts on our platform

Recent articles & questions

What Components of the Suspension or Steering Systems Are Prone to Fail?
In In automotive usage, the term "suspension" refers to all of the parts that connect the vehicle to the road. Every car, truck, and utility vehicle has a suspension that is designed to do three things: Support the vehicle Absorb...
Symptoms of a Bad or Failing Windshield Washer Reservoir
Common signs include fluid leaks from below the car, washer fluid not spraying or frequently low, and cracks in the tank.
How to Troubleshoot a Car Pulling to One Side
If your car pulls to the left or leans to one side, check that your tires are all the same size, suspension parts are even, and if springs are bent.

Where is the thermostat located in a 1993 Pontiac sunbird? Thank you for you time.

Smart idea to get some info before jumping in! When you are standing in front of your car looking under the hood, the thermostat housing is close to the front, towards the passenger side, with the radiator hose coming out...

Noise in engine - 1999 Jeep Wrangler

A clicking sound could be many things. However, a critical clicking noise may be an issue of low oil in the motor, which could cause the clicking sound you describe and would go away as the engine RPM's increase due...

Car stalls after fueling

It sounds like you may have a problem with your evaporative emissions system. Your car has a small purge valve called a purge solenoid (https://www.yourmechanic.com/services/evaporation-vent-solenoid-replacement) that controls the venting of fumes from the fuel tank as these fumes build up...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com