Mitsubishi Eclipse Cross Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(153)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(153)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Mitsubishi Eclipse Cross Brake Pad Replacement is $216 with $76 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Mitsubishi Eclipse CrossL4-1.5L TurboService typeBrake Pads - Rear ReplacementEstimate$345.88Shop/Dealer Price$390.17 - $513.32
2019 Mitsubishi Eclipse CrossL4-1.5L TurboService typeBrake Pads - Rear ReplacementEstimate$331.45Shop/Dealer Price$372.71 - $491.56
2024 Mitsubishi Eclipse CrossL4-1.5L TurboService typeBrake Pads - Rear ReplacementEstimate$335.07Shop/Dealer Price$377.27 - $498.85
2024 Mitsubishi Eclipse CrossL4-1.5L TurboService typeBrake Pads - Front ReplacementEstimate$335.07Shop/Dealer Price$377.27 - $498.85
2023 Mitsubishi Eclipse CrossL4-1.5L TurboService typeBrake Pads - Rear ReplacementEstimate$335.07Shop/Dealer Price$379.04 - $501.94
2023 Mitsubishi Eclipse CrossL4-1.5L TurboService typeBrake Pads - Front ReplacementEstimate$335.07Shop/Dealer Price$377.44 - $499.14
2022 Mitsubishi Eclipse CrossL4-1.5L TurboService typeBrake Pads - Front ReplacementEstimate$335.07Shop/Dealer Price$377.29 - $498.88
2019 Mitsubishi Eclipse CrossL4-1.5L TurboService typeBrake Pads - Front ReplacementEstimate$331.45Shop/Dealer Price$372.74 - $491.61
Show example Mitsubishi Eclipse Cross Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(153)

Rating Summary
140
12
1
0
0
140
12
1
0
0

Salim

31 years of experience
168 reviews
Salim
31 years of experience
Mitsubishi Galant V6-3.0L - Brake Pads Replacement (Front) - Alameda, California
Salim was on time and completed the jobscope professionally.

Whitney

40 years of experience
783 reviews
Whitney
40 years of experience
Mitsubishi Eclipse V6-3.0L - Brake Pads Replacement (Front) - Sunnyvale, California
(This review is related to my other one for my 60K mileage service) This is the 4th or 5th time I've brought my car and my wife's car to Whitney. It's hard to find an honest mechanic that really knows what he's doing. It's really convenient for me because Whitney just shows up at my office and works his skills on the car (he brings all his tools & is fully equipped!), thus I don't have to worry about coordinating with my wife or co-workers to drop me off at a repair shop, pick me up afterwards, hit traffic during rush hour and miss work. And of course, the price point is important: it's way cheaper than taking it to a shop. When my Eclipse hit the 60K+ mile mark, I needed service. Whitney inspected it and told me what needed to be changed, and also told me what wasn't necessary. Then he did all the work in at my office's parking lot. I highly recommend Whitney to all my friends and family.

Tam

23 years of experience
251 reviews
Tam
23 years of experience
Mitsubishi Montero V6-3.5L - Brake Pads Replacement (Front) - Morgan Hill, California

Andrew

12 years of experience
396 reviews
Andrew
12 years of experience
Mitsubishi Galant L4-2.4L - Brake Pads Replacement (Front) - Hanover, Maryland
great mechanic, completed the job in a short amount of time

Excellent Rating

(153)

Rating Summary
140
12
1
0
0
140
12
1
0
0
Number of Mitsubishi Brake Pad Replacement services completed
1683+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
800+
experts on our platform

Recent articles & questions

How to Test for ASE Master Certification
If If you’re looking for automotive technician jobs (http://yourmechanic.com/automotive-technician-jobs) that pay more money, one solution is to simply invest in your own education. By becoming dealership certified in a particular manufacturer, you’ll be a specialist who will enjoy a much...
A Buyer’s Guide to the 2012 Smart ForTwo EV
The The growing number of electric options available in the market has led to many carmakers throwing their hats in the ring with their own innovations, and this couldn’t be more obvious than with the 2012 Smart ForTwo EV. Add...
How to Drive Safely without Mirrors If You Have To
Your Your car has mirrors for a very good reason: you need to see behind you and beside you at all times, or your safety is compromised. You’ll also be a threat to other people on the road. But what...

Engine vibrates at idle

Hi there, thanks for writing in. I'd be happy to offer my insight. I'm curious as to your vehicle's motor size. There are four different motors available in your Cherokee, each with their own set of issues. I would say...

Water pump/water pump pulley is bad?

Hey there. When you move the fan, if you see the pulley moving up and down then you have a water pump bearing that went out. You should also notice if there is a wobble of the cooling fan clutch...

When making left turns engine seems to make scratchy noiseg

The noise may be coming from the brakes or the rotor is hitting the backing plate for the brakes due to a loose wheel bearing. You should have the brakes and bearings checked.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com