Mercury Montego Engine is sputtering Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(23)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(23)

Engine is sputtering Inspection Service

How much does a Engine is sputtering Inspection cost?

On average, the cost for a Mercury Montego Engine is sputtering Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1968 Mercury MontegoV8-7.0LService typeEngine is sputtering InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1973 Mercury MontegoL6-4.1LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1969 Mercury MontegoV8-6.4LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1969 Mercury MontegoL6-4.1LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1975 Mercury MontegoV8-5.8LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1976 Mercury MontegoV8-7.5LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1969 Mercury MontegoV8-5.8LService typeEngine is sputtering InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1971 Mercury MontegoV8-5.8LService typeEngine is sputtering InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mercury Montego Engine is sputtering Inspection prices

In almost all cases, a sputtering engine is trying to tell you that there is a deeper problem that requires immediate attention. An engine running out of gas will definitely sputter but if the gas gauge indicates full, the problem lies deeper inside the engine compartment.

An incomplete combustion in the engine will cause a sputter as can the ignition system. The fuel system, such as a blocked fuel injector may also cause the vehicle to sputter. While a sputtering engine may not seem like a major issue, it is a symptom of a bigger problem that will not self-correct and will eventually result in a much more expensive repair. The source of the sputter should be investigated and repaired as soon as possible.

How this system works:

A sputtering engine can have its root cause located in a number of different systems. Here are two of the more common ones, the exhaust and fuel system.

The exhaust system collects exhaust gases from the cylinder head via the exhaust manifold, which acts as a funnel diverting exhaust gases away from the cylinders. The gases are then released through the front pipe where they travel to the catalytic converter. The catalytic converter removes the harmful elements of the gases such as carbon monoxide and hydrogen monoxide, converting them into inert gases.

The gases exit the catalytic converter into the muffler, which reduces the noise levels of the engine, and finally the exhaust fumes exit the vehicle at the tail pipe.

The fuel system is responsible for storing and supplying fuel to the car to drive the engine. Fuel is mixed with air, atomized and vaporized. This happens in the engine intake system. This mixture is then compressed in the engine cylinder and then ignited which produces the energy which moves the pistons.

Common reasons for this to happen:

  • Leak in Exhaust Manifold: A leak in the exhaust manifold, which collects exhaust gases, can cause the engine to sputter or run unevenly. This condition can also cause the Check Engine light to trigger as well as present increased engine noise and poor performance from the engine. A cracked or leaking exhaust manifold can create dangerous driving condition as the escaping hot gases can melt nearby plastic components. It can also lead to exhaust fumes making their way into the car cabin.

  • Worn Seals or Gaskets: There are a number of gaskets and seals in the exhaust system and if any of them are failing it can create a rough or sputtering engine. Gaskets and seals wear down over time and will eventually have to be replaced. Failing to do this in a timely manner can damage the exhaust manifold which is a much more expensive repair.

  • Failing Catalytic Converter: If the engine is sputtering, running rough and has a smell of rotten eggs it is probably due to a failing catalytic converter. In most cases, the Check Engine light will trigger as well. When a converter starts to fail, it isn’t able to burn off the hydrocarbons in the exhaust, and is no longer breaking down the sulfur created by the engine. This leads to the strong rotten egg smell. Eventually the car will not start at all as the catalytic converter becomes totally blocked.

  • Malfunctioning Oxygen Sensors: Oxygen sensors measure how rich or lean the exhaust gases are when they leave the vehicles combustion chamber. The vehicle computer uses this information to adjust the amount of fuel entering the engine. A dirty or failing sensor puts too much or too little fuel into the engine causing it to run rough or sputter. Oxygen sensors must be replaced on a regular basis.

  • Dirty Fuel Injectors: Fuel injectors spray fuel into the cylinders. It is then mixed with air and ignited. Fuel injector nozzles can become clogged over time, which can lead to a sputtering engine, slow acceleration and the car not having enough power. Fuel injectors can be cleaned if the problem is caught early, but as the conditions worsens, the injectors may have to be replaced.

  • Bad or Dirty Spark Plugs: Spark plugs are responsible for igniting the fuel in the combustion chamber. If they are not working correctly or are dirty they don’t ignite the fuel cleanly and the car can misfire or sputter. The plugs will need to be replaced or cleaned.

  • Dirty Mass Airflow Sensor: The mass airflow sensor measures the amount of air that is entering the fuel injection system. It sends that information to the vehicle computer, which then delivers the proper amount of fuel to the combustion chamber. A dirty mass airflow sensor will send the wrong information the computer resulting in a rough running or sputtering engine.

  • Vacuum Leak: A leak in the vacuum system can lead to a sputtering or rough running engine. As the problem progresses the vehicle can hesitate or stall when accelerating.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the engine is sputtering issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

A mechanic will inspect your car's exhaust system and other important components of your vehicle. This includes the exhaust manifold, exhaust seals and gaskets, oxygen sensors, airflow sensors and more. It may be necessary for the mechanic to crank up your car to diagnose your engine's sputtering.

How important is this service?

In almost all cases, a sputter engine is a symptom of a more serious issue lurking below the surface. If the problem is not diagnosed and repaired in a timely manner the vehicle will likely start to stall, become hard to start and eventually stop running altogether.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(23)

Rating Summary
23
0
0
0
0
23
0
0
0
0

Michael

4 years of experience
233 reviews
Michael
4 years of experience
Mercury Montego V6-3.0L - Car is not starting - Fishers, Indiana
He took the time to check everything and followed protocol well. Michael was also willing to explain and answer our questions!

Christopher

11 years of experience
39 reviews
Christopher
11 years of experience
Mercury Montego V6-3.0L - Starter - Virginia Beach, Virginia
Nice guy. Professional, and he explained what was done, and gave good advice on what can be done if further issues occur.

Christopher

12 years of experience
142 reviews
Christopher
12 years of experience
Mercury Montego V6-3.0L - Brake Pads Replacement (Front) - Pineville, North Carolina
Great experience with Christopher. Arrived on time and did excellent job on the front brake pad replacement. He was very knowledgeable and explained what he was doing. Would use him again and would recommend him to others.

Edgar

14 years of experience
38 reviews
Edgar
14 years of experience
Mercury Montego V6-3.0L - Starter - East Orange, New Jersey
Great service, very knowledgeable.

Excellent Rating

(23)

Rating Summary
23
0
0
0
0
23
0
0
0
0
Number of Mercury Montego services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

Symptoms of Bad or Failing Exhaust Supports
Common signs include the exhaust pipe seeming loose or swaying, the muffler hanging to the ground, and the exhaust sounding louder than usual.
P2007 OBD-II Trouble Code: Intake Manifold Runner Control Stuck Closed Bank 2
P2007 P2007 trouble code definition P2007 is a general OBD2 code that indicates a malfunction in the intake manifold runner control circuit. This code is similar to P2004, P2005, P2006, P2008, P2009, P2010 and P2015. What the P2007 code means...
How to Get a Loan When Buying an RV
It’s no coincidence that the “R” in RV stands for “Recreation.” After all, Recreation Vehicles can be a lot of fun to own and provide a lot of freedom, luxury, and relaxation to many people. An RV can be its...

Using the MAF cleaner for cleaning the throttle body

Yes, you can use a MAF cleaner on a throttle body, but you cannot use throttle body cleaner on a MAF. The MAFs are very particular. If you use the wrong kind of cleaner on the MAF sensor and it...

My car keeps shutting off itself and shaking

Shaking or vibration (https://www.yourmechanic.com/services/engine-is-shaking-pulsating-or-vibrating-inspection) may be caused by many different things such as faulty spark plugs, poor fuel pressure or misfires. Other things such as a faulty idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) may cause the engine idle to drop below...

How long does it take to replace the control arm assembly in a Mercedes-Benz S 500?

Hi there. The time for removing and replacing a control arm on a 2000 Mercedes-Benz S500 ranges between 4 to 6 hours depending on the persons experience and if the parts come off easy or not. If you need further...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com