Mercedes-Benz SLK32 AMG Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Mercedes-Benz SLK32 AMG Power Steering Pump Replacement is $1023 with $687 for parts and $336 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Mercedes-Benz SLK32 AMGV6-3.2L TurboService typePower Steering Pump ReplacementEstimate$1745.54Shop/Dealer Price$2110.53 - $3156.88
2003 Mercedes-Benz SLK32 AMGV6-3.2L TurboService typePower Steering Pump ReplacementEstimate$1723.92Shop/Dealer Price$2078.30 - $3116.71
2004 Mercedes-Benz SLK32 AMGV6-3.2L TurboService typePower Steering Pump ReplacementEstimate$1723.92Shop/Dealer Price$2078.46 - $3116.98
Show example Mercedes-Benz SLK32 AMG Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0

Miguel

36 years of experience
258 reviews
Miguel
36 years of experience
Mercedes-Benz SLK32 AMG V6-3.2L Turbo - Oil Change - Jacksonville, Florida
This was my first time working through this application. I was nervous as it felt unordinary not being in a shop but Miguel put those fears to bed. He was timely and knowledgeable about my car. I had a lively chat with him throughout the experience and great service. Thank you Miguel!

Peter

29 years of experience
592 reviews
Peter
29 years of experience
Mercedes-Benz SLK32 AMG V6-3.2L Turbo - Crankshaft Position Sensor Replacement - Burbank, California
Awesome guy and quick service!

Jason

13 years of experience
13 reviews
Jason
13 years of experience
Mercedes-Benz SLK32 AMG V6-3.2L Turbo - Pre-purchase Car Inspection - Sykesville, Maryland
Top shelf mechanic. Diligent, courteous, thorough and professional. Demonstrated a high degree of expertise with limited production AMG model variant. Would recommend Jason for any pre-purchase inspection or general mechanical work on any vehicle he indicated he can support.

Melvin

18 years of experience
221 reviews
Melvin
18 years of experience
Mercedes-Benz SLK32 AMG V6-3.2L Turbo - Oil Change - Atlanta, Georgia

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0
Number of Mercedes-Benz SLK32 AMG services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Remove the Wheels from Your Vehicle
Your Your tires are an essential part of your vehicle. They are there for safety, comfort, and performance. The tires are mounted (https://www.yourmechanic.com/article/how-tires-work) to the wheels, which in turn are mounted to the vehicle. Some vehicles have directional or positional...
Is It Time to Upgrade Your OBD Scanner?
Automotive technician jobs require OBD scanners. Use yours when a problem is obvious to check if you need to upgrade your Onboard Diagnostics scanner.
How to Renew Your Car Registration in South Dakota
Most Most people forget that driving on the roadways of South Dakota is a privilege. There are a variety of things that have to be done to these roadways to keep them in good shape. Paying the fees to register...

Motor shakes

Hi there. Sounds like you might be having multiple issues. Because of the safety concern with the steering wheel locking and the limited amount of information, I am going to suggest you not drive the vehicle and seek help from...

My car is throwing a P2138 code.

Hi there. Here are some potential causes for this code: •The wiring connector or "pig tail" on the throttle body could have a poor connection. The female terminals on the pigtail corrode or pull out of the connector. •Possible shorting...

2004 Toyota 4Runner Limited V8

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com