Mercedes-Benz SLK300 Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(10)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(10)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a Mercedes-Benz SLK300 Car is slow to accelerate Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Mercedes-Benz SLK300V6-3.0LService typeCar is slow to accelerate InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2009 Mercedes-Benz SLK300V6-3.0LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2016 Mercedes-Benz SLK300L4-2.0L TurboService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2011 Mercedes-Benz SLK300V6-3.0LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
Show example Mercedes-Benz SLK300 Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0

Alex

22 years of experience
112 reviews
Alex
22 years of experience
Mercedes-Benz SLK300 V6-3.0L - Starter - Mesa, Arizona
Very good he takes pride in his work and loves the chalenge. Had the proper tools to handle the German car. Thank you for now . I will tell people in our park.

Jimmi

27 years of experience
264 reviews
Jimmi
27 years of experience
Mercedes-Benz SLK300 V6-3.0L - Battery - Winter Springs, Florida
Thank you Jimmy for your expertise! Jimmy was on time, and very knowledgeable in resolving the issue with my Mercedes.

Gharieb

20 years of experience
24 reviews
Gharieb
20 years of experience
Mercedes-Benz SLK300 V6-3.0L - Battery - Santa Monica, California
I really appreciate the convenience of having a trusted & vetted mechanic like G come on site to fix my car while I am at work. The price transparency of the service/labor & spare part items breakdown in the invoice is also very informative. Thanks again!

Emmette

36 years of experience
282 reviews
Emmette
36 years of experience
Mercedes-Benz SLK300 V6-3.0L - Cabin Air Filter - Woodbridge, Virginia
Emmette is extremely knowledgeable, when I need a mechanic again, Emmette will be my first call.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0
Number of Mercedes-Benz SLK300 services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Insurance Requirements for Car Registration in Connecticut
All All Connecticut drivers are required to carry automotive insurance, or “financial responsibility,” in order to operate a vehicle legally and maintain vehicle registration. The current laws state that you must retain three types of insurance in order to drive...
P2019 OBD-II Trouble Code: Intake Manifold Runner Pos Sensor/Switch Circuit Bank 2
P2019 P2019 trouble code definition P2019 is a general OBD2 diagnostic trouble code (DTC) that indicates a problem in with the intake manifold runner control circuit. What the P2019 code means The P2019 is set when the intake manifold runner...
P0703 OBD-II Trouble Code: Torque Converter/Brake Switch B Circuit Malfunction
P0703 Code means the PCM has registered a fault in the brake switch B circuit due to failed brake lamp switch, faulty fuse or socket

Car shakes at 40 mph

The brake issue is most likely a separate issue from the tire balance issue. It's possible the brake linings are worn or the backing plate is contacting the rotor. These items can be inspected during the tire rotation (https://www.yourmechanic.com/services/rotate-tires). If...

My check engine light came on and the it was diagnosed as op128 so I got gas screwed on my cap and my light turned off how is this

First, a trouble code P0128 (https://www.yourmechanic.com/article/p0033-obd-ii-trouble-code-turbo-charger-or-supercharger-bypass-valve-control-circuit-by-john-nelson) does have to do with coolant, but it is not the level. This code is set when the relationship between the coolant temperature sensor and the intake air temperature sensor don't increase at a...

No power stalling and very hard to accelerate because it surges and sputters

Hi Jacob. Diagnosing an issue like this is best when you understand all of the possible sources of an OBD-II trouble code. When the signal to and from the camshaft position sensor and the PCM is broken, the ignition spark...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com