Mercedes-Benz SLK280 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(32)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(32)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Mercedes-Benz SLK280 Mass Airflow Sensor Replacement is $373 with $278 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Mercedes-Benz SLK280V6-3.0LService typeMass Airflow Sensor ReplacementEstimate$670.59Shop/Dealer Price$826.99 - $1256.82
2008 Mercedes-Benz SLK280V6-3.0LService typeMass Airflow Sensor ReplacementEstimate$650.59Shop/Dealer Price$807.02 - $1236.87
2007 Mercedes-Benz SLK280V6-3.0LService typeMass Airflow Sensor ReplacementEstimate$650.59Shop/Dealer Price$807.02 - $1236.87
Show example Mercedes-Benz SLK280 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(32)

Rating Summary
31
0
0
0
1
31
0
0
0
1

Chris

22 years of experience
2247 reviews
Chris
22 years of experience
Mercedes-Benz SLK280 V6-3.0L - Oil Change - Irvine, California
Chris was fantastic. I was so worried about if I should take the car to a mechanic or try this service I was so pleased with him and obviously picked the right guy.

James

31 years of experience
705 reviews
James
31 years of experience
Mercedes-Benz SLK280 V6-3.0L - Oil Change - Garden Grove, California
He was very informative and knew all aspects of my Mercedes found the problems was direct and professional really enjoyed having him over

Damian

11 years of experience
430 reviews
Damian
11 years of experience
Mercedes-Benz SLK280 V6-3.0L - Headlight Bulb Replacement (Driver Side Low Beam) - Orlando, Florida
Good

Carlos

28 years of experience
516 reviews
Carlos
28 years of experience
Mercedes-Benz SLK280 V6-3.0L - Battery - Irvine, California
Great

Excellent Rating

(32)

Rating Summary
31
0
0
0
1
31
0
0
0
1
Number of Mercedes-Benz SLK280 services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Replace a Coolant Temperature Sensor
The coolant temperature sensor switch is not working if the engine emits black smoke. The switch may have failed if the car gets poor fuel economy.
How to Replace a Fuel Gauge Sender
The fuel gauge has a sender that goes bad when it says that the fuel level is different lower or higher than it actually is.
What Does the Rain and Light Sensor Warning Light Mean?
The rain and light sensor warning light indicates when there is an issue with the sensor system. It will remain deactivated until fixed.

Truck keeps turning off after 10-20 mins of driving and when its at low idle. Not sure why?

Hello. P0340 is the trouble code for an issue with the vehicle's camshaft position circuit. The circuit includes the sensor built into the distributor, as well as the wiring that carries the signal to the computer. If the distributor is...

My DPFE sensor burned up. What do you think caused this and will it do a new one the same way?

Hi and thanks for contacting YourMechanic. The delta pressure feedback of EGR (DPFE (https://www.yourmechanic.com/services/egr-pressure-feedback-sensor-replacement)) sensor was burned up for having too much back pressure on the engine. A plugged catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement) or a plugged exhaust muffler will cause the...

Can I drive my car with a bad MAP sensor?

The Manifold Absolute Pressure (MAP) sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-manifold-absolute-pressure-sensor-map-sensor) is primarily used to provide fuel percentages to the intake manifold. If it's damaged, it typically causes no problems except for excessive fuel consumption and loss of engine power. It should be OK...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com