Mercedes-Benz SL400 Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,716)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,716)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Mercedes-Benz SL400 Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Mercedes-Benz SL400V6-3.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2015 Mercedes-Benz SL400V6-3.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz SL400 Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,716)

Rating Summary
5,320
192
54
29
121
5,320
192
54
29
121

David

10 years of experience
171 reviews
David
10 years of experience
Mercedes-Benz SL400 V6-3.0L Turbo - Pre-purchase Car Inspection - Orlando, Florida
Pre-Purchase service - On time with appointment. Follow up call and report was generated immediately which is greatly appreciate. Many thanks!!

Antonios

18 years of experience
56 reviews
Antonios
18 years of experience
Mercedes-Benz CLK350 V6-3.5L - Spark Plugs - West Roxbury, Massachusetts
This the second time Tony has worked on my car and like the last time his work and explanation about my car was exceptional. I would recommend Tony to anyone in a minute. You can’t beat the service, convenience, and price. I’m a very, very satisfied customer. Rating from 1 - 10 Tony gets an 11!!!

Eduardo

19 years of experience
555 reviews
Eduardo
19 years of experience
Mercedes-Benz GL450 V8-4.6L - Serpentine/Drive Belt - Katy, Texas
Outstanding in all respects.

Jason

15 years of experience
344 reviews
Jason
15 years of experience
Mercedes-Benz C300 L4-2.0L Turbo - Oil Change - Bronx, New York
Excellent job

Excellent Rating

(5,716)

Rating Summary
5,320
192
54
29
121
5,320
192
54
29
121
Number of Mercedes-Benz services completed
62876+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Get the Best Fuel Economy in Hot Weather
Let’s Let’s face it: fuel prices continually bob up and down, but gas is never cheap. There are many factors that can affect how much fuel your vehicle uses, which directly affects your pocketbook. With the advent of warmer weather,...
P2043 OBD-II Trouble Code: Reductant Temperature Sensor Circuit Range/Performance
P2043 P2043 code definition Reductant Temperature Sensor Circuit Range/Performance What the P2043 code means This code indicates that the powertrain control module has detected a malfunction with the reductant injector air pressure/temperature sensor. This sensor is used to reduce gases...
How Much Does a Mechanic Make in Ohio?
Automotive technician jobs in Ohio have an average salary of $37k, and the state industry is growing rapidly.

I have a 2010 Buick Enclave cxl and the engine light when on a week ago on Monday I took it to auto zone and they gave me a code f

Most emission codes will not result in a no crank condition. Once the cause of the no crank/no start fault is repaired though, you should still request a check engine light diagnostic (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) so that the responding certified mechanic can...

Brake Pads, rotors caliper replacement what is the cost of labor

If the brakes are otherwise functioning properly (i.e. not sticking or grabbing inadvertently), then it is likely you do not need to replace the calipers. If your vehicle pulls to one side when you apply the brakes it typically means...

I have a 2001 Audi a6 Quattro Biturbo that got too hott driving and turned off now it wont turn back on

The status of the oxygen sensors is unrelated to the present no start. Overheating has the potential to cause head gasket leaks and valve and piston damage. You should measure cylinder compression to rule out low compression as a cause...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com