Mercedes-Benz R320 Exhaust Manifold Repair at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1)

Exhaust Manifold Repair Service

How much does a Exhaust Manifold Repair cost?

On average, the cost for a Mercedes-Benz R320 Exhaust Manifold Repair is $902 with $456 for parts and $446 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Mercedes-Benz R320V6-3.0L Turbo DieselService typeExhaust Manifold RepairEstimate$1451.51Shop/Dealer Price$1761.54 - $2506.53
2008 Mercedes-Benz R320V6-3.0L Turbo DieselService typeExhaust Manifold RepairEstimate$1357.51Shop/Dealer Price$1667.69 - $2412.79
2007 Mercedes-Benz R320V6-3.0L Turbo DieselService typeExhaust Manifold RepairEstimate$1357.51Shop/Dealer Price$1667.67 - $2412.76
Show example Mercedes-Benz R320 Exhaust Manifold Repair prices

What is the Exhaust Manifold all about?

Depending on your engine and type of vehicle, the exhaust manifold can either be a set of pipes or it can be a cast iron manifold assembly. Essentially the exhaust manifold takes the burned exhaust gases from the engine’s cylinders and ejects the gas through the exhaust system and out through the car's tail pipe. The exhaust gases are the burned fuel/air residue from the combustion process in the cylinders of the engine. Over time, the constant expansion and contraction of the components (caused by constant heating and cooling in the engine), may cause the manifold to crack and leak. These leaks can be hazardous as hot exhaust gases escape and can damage other components in the engine compartment. A leaky exhaust manifold can also impact engine performance.

Keep in mind:

Sometimes an exhaust manifold starts to leak because a mounting bolt has broken. If this happens, the mechanic will have to remove the broken bolt or stud, which can increase the labor time needed to fix the problem. Your mechanic may charge you an additional fee, depending on the severity of the situation.

How it's done:

  • Determine if the manifold is cracked or broken.
  • Remove and replace faulty exhaust manifold.
  • Inspect exhaust studs, clean carbon and old gasket off cylinder head.
  • Install new gasket and exhaust manifold.
  • Start engine and check for exhaust leaks.

Our recommendation:

The exhaust manifold is transferring burned gasses from the engine. It is located in a high temperature zone, and it will leak eventually. There is no way to prevent it. Your mechanic should use anti-seize compound on the bolts when they are replacing this part. This will help prevent bolts from breaking in the cylinder head.

What common symptoms indicate you may need to replace the Exhaust Manifold?

  • Loud noise from engine.
  • Lack of engine performance.
  • Check engine light is on.
  • Smells from the engine compartment (eg. plastic components next to exhaust manifold melting from escaped heat).

How important is this service?

A leaky exhaust manifold is a health and safety concern. Hot exhaust gases escaping from the engine can be a fire hazard melting nearby plastic components in the engine compartment.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(1)

Rating Summary
1
0
0
0
0
1
0
0
0
0

Ben

41 years of experience
1436 reviews
Ben
41 years of experience
Mercedes-Benz R320 V6-3.0L Turbo Diesel - Oil Change - Katy, Texas

Tung

16 years of experience
310 reviews
Tung
16 years of experience
Mercedes-Benz R320 V6-3.0L Turbo Diesel - Exhaust Gas Recirculation (EGR) Tube - Marietta, Georgia
Tung worked hard and got the job done! Highly recommended.

Chris

16 years of experience
332 reviews
Chris
16 years of experience
Mercedes-Benz R320 V6-3.0L Turbo Diesel - Serpentine/Drive Belt - Spring Valley, California
Friendly

Whitney

39 years of experience
783 reviews
Whitney
39 years of experience
Mercedes-Benz S420 V8-4.2L - Fix a Flat Tire (Plug Holes) - Palo Alto, California
It's great.

Excellent Rating

(1)

Rating Summary
1
0
0
0
0
1
0
0
0
0
Number of Mercedes-Benz Exhaust Manifold Repair services completed
11+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

The Top 5 Selling Cars in Alaska in 2012
Alaska Alaska requires a different kind of vehicle to handle both the terrain and the wintery conditions. While some of the most popular options for the Alaskan terrain in previous years included options such as the Subaru Forester and the...
P2033 OBD-II Trouble Code: Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2
P2033 trouble code definition Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2 What the P2033 code means P2033 is an...
Veteran and Military Driver Laws in All States
Veteran and military personnel can qualify for special benefits for driving, including exemption from license and registration fees.

What should I know about driving on hills?

While there is no replacement for awareness when driving, there are a couple things you can do when you’re about to go up a hill: Shift to a low gear and stay at a slow speed while going up the...

What happens if I don't replace knock sensor?

The knock sensor on the engine is there to detect for an engine noise from pre ignition (pining) normally. This is so the computer can advance the ignition timing to the maximum it can without the engine pinging. This gives...

No start with no fuel to the engine.

Hello. A no start condition can be caused by many things. If you have determined that the engine is not getting fuel then that signifies there is likely an issue with the fuel system. I would start by making sure...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com