Mercedes-Benz R320 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(439)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(439)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Mercedes-Benz R320 Car Battery Replacement is $403 with $263 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Mercedes-Benz R320V6-3.0L Turbo DieselService typeCar Battery ReplacementEstimate$680.38Shop/Dealer Price$818.03 - $1216.79
2009 Mercedes-Benz R320V6-3.0L Turbo DieselService typeCar Battery ReplacementEstimate$671.37Shop/Dealer Price$805.92 - $1202.37
2007 Mercedes-Benz R320V6-3.0L Turbo DieselService typeCar Battery ReplacementEstimate$671.37Shop/Dealer Price$805.97 - $1202.44
Show example Mercedes-Benz R320 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(439)

Rating Summary
425
9
1
1
3
425
9
1
1
3

Chris

17 years of experience
340 reviews
Chris
17 years of experience
Mercedes-Benz R320 V6-3.0L Turbo Diesel - Serpentine/Drive Belt - Spring Valley, California
Friendly

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Mercedes-Benz R320 V6-3.0L Turbo Diesel - Oil Change - Katy, Texas

Tung

17 years of experience
310 reviews
Tung
17 years of experience
Mercedes-Benz R320 V6-3.0L Turbo Diesel - Exhaust Gas Recirculation (EGR) Tube - Marietta, Georgia
Tung worked hard and got the job done! Highly recommended.

Rigoberto

12 years of experience
739 reviews
Rigoberto
12 years of experience
Mercedes-Benz S550 V8-5.5L - Battery - Chicago, Illinois
Rigoberto helped replace my battery on a Mercedes Benz s550 4matic. He was incredibly knowledgeable about the vehicles and inspected it thoroughly to point all areas that may need to be fixed in the near future. Furthermore, he was very profession and courteous. I am very particular with my vehicles and would trust Rigoberto with any future work that needs to be performed on the vehicle.

Excellent Rating

(439)

Rating Summary
425
9
1
1
3
425
9
1
1
3
Number of Mercedes-Benz Car Battery Replacement services completed
4829+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0083 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 1 Sensor 2)
P0083 P0083 code definition P0083 is a general OBD2 code indicating a issue with bank 2 intake valve control solenoid. This code may be seen with P0081 and P0082. The vehicle also has a bank 1 valve control solenoid. What...
P0133: OBD-II Trouble Code: O2 Sensor Circuit Slow Response (Bank 1 Sensor 1)
P0133 Trouble code definition P0133 O2 Sensor Circuit Slow Response What the P0133 code means Bank 1 Sensor 1 is a sensor...
How Long Do Battery Terminal Ends Last?
A A properly working charging system is an essential part of keeping a car reliable. Each of the components of a charging system has a specific job that it must perform in order for the vehicle to run properly. In...

Are Euro-Metric and P-Metric Tires Interchangeable?

When looking for tires, you may run into some confusion when you see words like euro-metric or p-metric (https://www.yourmechanic.com/article/converting-euro-metric-and-p-metric-tire-sizes). With all of the other ratings on tires (https://www.yourmechanic.com/article/understanding-tire-service-descriptions-speed-rating-and-load-index), such as temperature, load, treadwear, and traction, adding these other terms into...

How do I clear the previous HomeLink garage door opener settings?

If you move, or are purchasing a used car, you’ll want to clear the previous HomeLink garage door opener settings before programming your own. You can do this in a few easy steps. Locate the HomeLink garage door buttons. There...

No power when stopping and pulling out in road

Hello. There are many things that can cause a vehicle to suddenly stall out. You mention that there was an issue with the power windows (https://www.yourmechanic.com/services/window-is-not-working-inspection) and door locks (https://www.yourmechanic.com/services/power-door-locks-are-not-working-inspection), this may be an indicator that the issue is electrical...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com