Mercedes-Benz ML500 Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(61)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(61)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a Mercedes-Benz ML500 Car is slow to accelerate Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Mercedes-Benz ML500V8-5.0LService typeCar is slow to accelerate InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2005 Mercedes-Benz ML500V8-5.0LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2004 Mercedes-Benz ML500V8-5.0LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2007 Mercedes-Benz ML500V8-5.0LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2002 Mercedes-Benz ML500V8-5.0LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2006 Mercedes-Benz ML500V8-5.0LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz ML500 Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(61)

Rating Summary
50
4
0
0
7
50
4
0
0
7

Ben

41 years of experience
1458 reviews
Ben
41 years of experience
Mercedes-Benz ML500 V8-5.0L - Air Springs Replacement (Driver Side Front, Passenger Side Front) - Houston, Texas
Early and thorough

Rodney

36 years of experience
561 reviews
Rodney
36 years of experience
Mercedes-Benz ML500 V8-5.0L - Crankshaft Position Sensor - Stockton, California
Nice man and knowledgeable about his job. I would love to have him back again to do my repairs.

Chris

22 years of experience
2266 reviews
Chris
22 years of experience
Mercedes-Benz ML500 V8-5.0L - Wheel Bearings Replacement (Driver Side Rear) - Irvine, California
Chris is very knowledgeable and has given excellent recommendation regarding the nuances of my Mercedes car. His opinions are very valuable and I would recommend him highly compared to the dealers who charge a bomb for the same job.

Nicholas

21 years of experience
354 reviews
Nicholas
21 years of experience
Mercedes-Benz ML500 V8-5.0L - Oil Change - Broomfield, Colorado
Showed up on time and did a great job.

Excellent Rating

(61)

Rating Summary
50
4
0
0
7
50
4
0
0
7
Number of Mercedes-Benz ML500 services completed
671+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Carburetor
Vehicles Vehicles are now manufactured using a fuel injection system in order to provide the engine with the proper fuel-air mixture. Prior to the 1980s, however, carburetors performed this task. The carburetor is similar to a throttle body in that...
P0162 OBD-II Trouble Code: Sensor Circuit Malfunction (Bank 2, Sensor 3)
P0162 P0162 code definition Trouble code P0162 is set when a malfunction is detected on the bank 2 sensor 3 oxygen sensor circuit. What the P0162 code means Bank 2 refers to the side of the engine opposite of cylinder...
The Guide to Legal Car Modifications in Oregon
ARENA Creative / Shutterstock.com If you live in Oregon or will do so in the near future, you need to make sure you understand the laws concerning modified vehicles. The following information will help you keep your...

How does the SRS (Supplemental Restraint System) work?

The Supplemental Restraint System is a supplement to the seat belts. It is intended to protect the upper body of the riders in the front seats. To understand the Supplemental Restraint System. The SRS will deploy the airbags when the...

Stabilizer link loose light coming on

Hello. Thank you for writing in. The stabilizer link and traction control lights can illuminate for several reasons. The simple fix would be if a sensor has failed somehow. The more complex issues would include mechanical damage or failure of...

My car has been overheating at idle for 4 days. I did some research and decided to replace the thermostat and coolant hoses, and do a coolant flush. On the 4th day I was driving home from a quick trip out and driving up hill. I turned over drive off because it's supposed to be better when going up steep hills. A few blocks later I started smelling burning and my temp gauge was shooting up. I was 2 blocks from home so I just got there and parked it. The next day I checked the coolant and the reservoir was empty. I checked the oil and it was almost black. Last time I checked them was 5 days previous and oil was fine, coolant needed to be topped off in the reservoir but it was only an inch below max. Do you think I might have an internal coolant leak? I don't think it's in the oil because it doesn't have that frothy look. Not sure about the heater core but I'm not noticing any monster in the front passenger area. I havent noticed any coolant leaking externally.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com